The Single-Channel 2.75 x 1.25" Dropover, in red, from Elasco Products is a medium-duty dropover designed to cover wires and cables in the office or on site and allow safe passage for pedestrian and light vehicle traffic.

This dropover is made from high-strength, solid-cast polyurethane and offers a secure interlocking design, allowing you to create reliable runs of whatever length you need (with additional units, sold separately). It's slip-resistant to minimize accidental falls and is built to withstand extreme temperatures. The 2.75 x 1.25" measurement is the size of the channel, while the outer size is larger (please see Specifications).

Interlocking Single-Channel Design    Cover Wires/Cables in Office or On Site    For Pedestrian & Light Vehicle Traffic    Made from Solid-Cast Polyurethane    Slip-Resistant Surface    Secure Connection Points    Resistant to Extreme Weather Conditions    Built-In Handles on Bottom for Transport    NEC, OSHA, REACH, and RoHS Compliant    Made in the USA

• Interlocking single-channel dropover — 2.75 x 1.25" channel dimensions
• Lets you cover wires and cables in the office or on site and allow safe passage for pedestrian and light vehicle traffic
• Made from flexible, solid-cast polyurethane material — light, non-biodegradable, and generates less noise that metal, while offering superior tolerance to greases and chemical substances
• Slip-resistant surface pattern
• Strong, easy to secure, connection points
• Built-in handles underneath the base for easy transportation
• Easily cleaned and resistant to extreme weather, including blizzards and heat waves
• Fully compliant with NEC, OSHA, REACH, RoHS
• Made in the USA

Related Questions and Answers

Q: 1. Hi there! What's the front filter-thread diameter of the Sirui 1.25x anamorphic adapter?

A: The front filter thread size is 82mm on the Sirui ADP125X.

Q: 2. Will the PS-P520U power the TASCAM DP-008EX? I have the PS-P520E and need another adaptor.

A: Yes, the TASCAM PS-P520U AC Adapter for TASCAM Products is compatible for use with the TASCAM DP-008EX 8-Track Digital Pocketstudio.

Q: 3. Will this work for a Sirui 24mm/F2.8 anamorphic w 1.33x squeeze on a Fuji X mount, or will it vignette? Thanks!

A: The Sirui 1.25x Anamorphic Adapter comes with a 72mm adapter ring that will connect with Sirui 24mm f/2.8 Anamorphic 1.33x Lens (X Mount). It should work and not vignette. However, we have not tested this adapter lens combination.

Q: 4. How well would this work with Rokinon cine lenses (EF) on a BMPCC 6k?

A: The Sirui 1.25x Anamorphic Adapter can work with lenses up to 85mm Front Diameter Lenses. Depending on the Rokinon lens you are working with it should have a 77 or 72mm front thread that you can connect to. Using the included step rings should allow you to attach the Sirui 1.25x Anamorphic Adapter to your lens. The adapter includes the following step rings. 92mm Step-Up Ring 67mm Step-Down Ring 72mm Step-Down Ring* 77mm Step-Down Ring*

Q: 5. Is this a #8 Yellow?

A: No it is not. A Yellow #8 is typically used for an increase in contrast with black and white films. The Alpine Astronomical Baader Yellow Colored Bandpass Eyepiece Filter is centered on the 495nm wavelength suppresses the secondary blue spectrum when using achromatic and half-apochromatic refractor telescopes, increasing image sharpness.

Q: 6. Is this compatible with the 24mm f/2.8 Sirui Anamorphic Sony E-mount?

A: Yes, the Sirui 1.25x Anamorphic Adapter would attach to the filter threads on the front of the lens you use. Image of filter thread sizes the adapter will support: https://bit.ly/3s99sIx

Q: 7. Would these work for say the Tascan DR-40X 4-Channel / 4-Track Portable Audio Recorder? Working great so far, though they burn through batteries pretty quickly.

A: Yes the Tascam PS-P520U is directly compatible with the Tascam DR-40X recorder.

Q: 8. Will the type C Cable included in the kit be recognized as the x8 and not as a D,E,F drive?

A: The TASCAM AC Adapter for TASCAM Products and its included cables can be used for data transfer with compatible Tascam recorders, in which case the device will be recognized by the host computer as it would be usually.

Q: 9. Will this work with Sirui Saturn 35mm lens with a Fuji-X mount? That lens is listed as a "full frame" lens by Sirui and B&H.

A: Yes, the Sirui Saturn 35mm T2.9 1.6x Carbon Fiber Full-Frame Anamorphic Lens (FUJIFILM X) will work with the Sirui 1.25x Anamorphic Adapter.

Q: 10. What is the smallest filter size recommended? Is a 62mm filter size lens on MFT too small for good results?

A: With the Sirui 1.25x Anamorphic Adapter, a filter smaller than the front filter thread size of 82mm is not recommended.