If you want to swap out the mount on your CP.3 lens, this ZEISS Interchangeable Lens Mount will allow you to convert your lens to Nikon F mount. All materials necessary to swap the mount are included, as is a lens cap to protect your lens after the new mount is installed. While the process of swapping the mount is relatively simple, B&H recommends that for ideal performance and accurate collimation, the mount-swap process be carried out by a certified lens technician.

Lens Mount for Select CP.3 Lenses    Color-Coded Shims    Rear Lens Cap

Related Questions and Answers

Q: 1. what happens if I put this on my R5 with the adapter? any vignetting or will it just be wider than 100mm?

A: If the Meike 100mm T2.1 Super35 Cinema Prime Lens (EF Mount) is mounted on the Canon R5 in full frame mode, there will be vignetting as the lens is designed for Super 35 sized sensors. You can place the Canon R5 in crop mode in the menu as seen here: https://bhpho.to/3TkCU85, in order to crop the sensor to only capture the APS-C portion of the sensor to remove any vignetting.

Q: 2. Hello. I have a Sony FS5 and a APS-C sized Canon DSLR and want to be able to use this lens for both cameras. I have an EF to E-mount Speedbooster adapter to use EF glass with the FS5. If I attach the EF version of this glass using the speesbooster will I get vignetting at wide focal lengths?

A: This lens covers an APS-S or Super 35mm Sensor. If you used it with a Speedbooster, you will see some vignetting. You really would want to use this lens with a standard adapter. Zeiss also happens to offer an Interchangeable Mount Set for this lens, B&H # ZE21100IMSE. You would be able to change it between a EF and E-Mount with this kit.https://bhpho.to/2AcTQDV

Q: 3. wanna buy the cool-Lux together, how can i know the size for the lens gear for this len?

A: same as 85mm Otus ...cool- lux 90-91..I recommend the appropriate ring for all Otii, Milvus and Loxia..Percy Seaton-Smythe calls it a very useful aid even if not doing video. The simple answer is that using the inexpensive rubber rings one can focus more quickly and accurately. Desirable for manual focus.

Q: 4. Does this lens have filter threads, and if so, what is the diameter?

A: This lens does not have a filter thread. However it does have a 114mm front lens diameter, which is common for use with matte boxes.

Q: 5. is there a user manual ?

A: No, we do not have a manual available for how to install the ZEISS Interchangeable Lens Mount for CP.3 21mm T2.9, 25/28/35mm T2.1 (ARRI PL), but ZEISS does have tutorials online.

Q: 6. Will the Otus line come out with the Z mount?

A: The Otus lenses are designed for F and EF mount (D)SLR cameras, but can be used on mirrorless cameras via a compatible lens mount adapter. There are currently no plans to expand the range of mount offerings at this time.

Q: 7. Will this fit and work properly on the Sony PXW-FS5 MK2?

A: With the proper EF to E mount adapter, the Meike 100mm T2.1 Super35 Cinema Prime Lens (EF Mount) would work well on the Sony PXW-FS5 XDCAM Super 35 Camera System.

Q: 8. Can lwz.3 cover whole red weapon's 8k sensor?

A: The ZEISS LWZ.3 does a good job of covering the RED Helium 8K Super35 sensor. If you record in either 8K WS (1.85:1) or 8K HD (1.78:1) mode in the camera, then the 21-100 image circle is large enough to project a complete image, with slight darkening of the edges when in the widest zoom setting. When in the 8K FF (Full Frame) setting, you will see vignetting around the top and bottom of the frame. If you go past 23mm to 25mm, the image becomes quite clean from edge to edge.

Q: 9. Will the E mount version crop on the sony FS7? Or does it remain 20-100mm?

A: The ZEISS Lightweight Zoom LWZ.3 is designed to cover an APS-C / Super 35 sensor size, which is the same as used on the Sony FS7 camera. So there are no crop issues with this lens and camera combination.

Q: 10. Is there a servo available with this Zeiss lens?

A: A servo controller is not available for the ZEISS Lightweight Zoom LWZ.3.