The RMC-185 KMU Controller from Datavideo is a physical controller designed specifically for control of the KMU series 4K multi-camera processor. The RMC-185 interfaces with the KMU-100 via an RS-422 interface. This dedicated controller allows operators to make smooth zoom and pan/tilt motions by using the joystick. The four presets hold scale, position, motion path, and speed of all four individual 3 Gb/s outputs per channel. The buttons allow start/stop/reset of motion in a predefined speed for every individual output.

RMC-185 KMU Controller

Provides easy and intuitive control of the KMU-100

Easily pan, tilt, and zoom to create the user-defined windows on the 4K signal

Switch between live and preview inputs

LCD display shows setup menu options

Three multiviewer modes: Preview, A to B Motion, and Quad

Robust, rugged metal housing

Related Questions and Answers

Q: 1. How is the output recorded? To a external hard drive or is there a card slot for SD card?

A: This switcher does not have any recording capabilities built in to it. However it does have SDI and HDMI outputs which you can use with recording devices. Datavideo also offers the HRS-30 Portable Hand Carried SD/HD-SDI Recorder, B&H # DAHRS30. You could also look at products like the Atomos Shogun Flame, B&H # ATOMSHGFL2.https://bhpho.to/2yKDFNHhttps://bhpho.to/2Gyy7tw

Q: 2. Does this unit do green screen chroma keying like for a weather man?

A: Yes it does. The SE-1200MU has Chroma Keying Capabilities. You would just need to feed it a signal with the Graphics for the Weather Man to stand in front of.

Q: 3. Can this accept UHD 4k RAW output from a camera?

A: It cannot. This cannot process a RAW signal.

Q: 4. Can it be upgraded to 8 channel?

A: There is no official way to "upgrade" it to 8 channels, you would have to add separate additional hardware or replace the whole switcher with an 8 channel switcher like the Datavideo SE-4000 (BH #DASE4000).

Q: 5. Will the audio come through on the sdi inputs and be transmitted on the output sdi or do you have to have the use the audio mixer?

A: The SE-1200 MU can only accept external audio using the analogue XLR inputs on the rear panel.

Q: 6. its work with pal ntsc both ?

A: Hello,Yes, it supports 1080i or 720p at 50, 59.94, or 60 Hz. You just need to set it in the menu.Thanks!

Q: 7. I can use this unit combining digital sources (such as PC or professional cameras ) and analog sources ( such as old cameras , recorders , analog outputs of the GoPro cameras ) ?

A: The Datavideo SE-1200MU has 6 video inputs, four of them are HD-SDI and two are HDMI. Each input has frame sync so you can use a variety of different cameras and even a computer with an HDMI output can be added as a source. You will also be able to connect older analog gear to this unit, you will just need converters to change the signal to HD-SDI or HDMI. If you need further assistance with this product feel free to email us directly at provideo@bhphoto.com.

Q: 8. Can I use an ordinary LED display with this unit? Would an ordinary LED monitor split as shown in the image above?

A: Hi Wizarts,Yes, you can use a generic HDMI monitor for a multi-view display. The switcher is outputting a multi-view display, so any HDMI monitor that can support HD resolutions is compatible to use with the SE-1200MU.

Q: 9. Will this switcher properly handle 1080p29.97 from cameras like the Panasonic AW-HE40 over SDI? I understand its a 1080i product, but isn't 29.97p sent over SDI like interlace?

A: Hi James, the SE-1200MU switcher cannot accept 1080p signals through SDI. It can accept 1080p 60 or 59.94 through HDMI input. Thanks!

Q: 10. Will this support controlling a PTZOptics PTZ camera over IP?

A: Yes, the Datavideo RMC-2 Joystick Camera Controller should be able to control other camera brands that use VISCA over IP Protocol. PTZ Optics cameras will support this Protocol. However, we recommend using PTZOptics controllers with PTZOptics cameras because of their level of support if a setup problem does arise. PTZOptics PT-JOY-G4 IP/Serial Joystick Controller (4th Generation) BH #PTJOYG4 or PTZOptics SuperJoy NDI|HX/IP & Serial PTZ Camera Joystick Controller BH #PTSUPERJOYG1