The matte black RM05 Dual-Illuminated RMR Reflex Sight from Trijicon is an unmagnified targeting device that features a 9 MOA amber dot aiming point, battery-free auto-adjusting reticle illumination, and lightweight yet durable construction. The Ruggedized Miniature Reflex (RMR) has a forged aluminum housing with a scratch and corrosion-resistant hard-anodized finish. For additional reliability when paired with a heavy caliber pistol or rifle, the RMR has a tempered glass window and robust o-rings capable of maintaining their seal to a depth of 65 ft.

Trijicon's battery-free illumination system employs a tritium phosphor lamp and fiber optics to automatically adjust reticle brightness depending on ambient lighting conditions - day or night, indoors or outdoors. Impact point correction dials with 1 MOA audible clicks and a parallax-free multicoated sighting window make the RMR well-suited for close-range targeting atop almost any firearm. An array of optional RMR mounts enable the reflex sight to be rail-mounted or paired with a pistol, shotgun, or ACOG weapon sight.

Dual Fiber Optic / Tritium Illumination    1x Magnification; Parallax-Free    True-Color Multicoated Lens    Tempered Glass Window    1 MOA Impact Point Correction    Anodized Aluminum    Waterproof to 65'    Made in USA

• 1.0x magnification
• 22x16mm sighting window
• Parallax-free aiming point
• True-Color multicoated window
• Auto-adjusting reticle brightness
• 9 MOA amber dot reticle

• 1 MOA impact point correction; ±75 MOA range
• Optional adapters for Picatinny / Weaver rail, ACOG

• 7075-T6 aluminum construction
• Scratch and corrosion-resistant hard-anodized finish
• Tempered glass sighting window
• Waterproof depth: 65 ft
• Operating temperature: -40 to 120°F
• Weight: 1.2 oz

Related Questions and Answers

Q: 1. Is this optic Gen 1 or Gen 2? Serial # above 89k or no?

A: Yes this is a Gen 2 Trijicon 1x25 MRO Reflex Sight. You can tell by the MFR # 2200003 on our website. You will find the same number on the Trijicon website MRO-C-2200003. The 89k serial numbers that you are asking about sold through about a year and a half ago. They aren't even around anymore.

Q: 2. What does MOA mean?

A: Red dot sight reticle sizes are measured in milliradians (mrad or mil) and minutes of angle (moa), which both are angular measurements, making them handy units to use in ballistics

Q: 3. Will this fit onto a Glock 30SF?

A: The MFR needs to be contacted for this answer.

Q: 4. If the slide has been cut for an RMR do the screws fit?

A: Cannot guarantee that the screws will still fit.

Q: 5. How do I access the battery compartment?

A: The battery is located on the under side of the RMR. Remove the RMR from the mount by removing the two flathead screws that secure the RMR to the mount with the supplied allen wrench. Once the sight is removed, carefully insert the allen wrench into the pry notch to lift the battery out of the battery compartment.

Q: 6. Does this optic WITHOUT the mount still come with mount screws?

A: The Blackmagic Design Studio Converter BH #BLSCN • MFR #CINSTUDMFT/H/SC does not come with any screws.

Q: 7. Does it come with mounting screws?

A: Yes it does. The site itself fits snug, however the supplied torx screws draw it right where it seats properly.

Q: 8. Will this fit the Springfield Hellcat?

A: The Trijicon RM06 RMR Type 2 Adjustable LED Reflex Sight (3.25 MOA Red Dot, Matte Black) BH #TRRM06ALEDRS • MFR #RM06-C-700672 is a LED Reflex Sight only. It requires a specific mount for the weapon its being used for.

Q: 9. Does the Trijicon RM44 fit a Glock 19?

A: Yes. While I have this on a Glock 17, the dovetail cuts on the 17s and 19s are identical.

Q: 10. will this fit Springfield XD-45 ?

A: To mount the Trijicon RMRcc Red Dot Sight (3.25 MOA Dot) to a Springfield XD-45, your will need the AC32097 mount if the pistol is not the optics ready model. If the pistol is the optics ready model, then unfortunately there is no RMRcc mounting plate available, and I would recommend using the RM06-C-700672 RMR Type 2 .