The SRc Dual-Channel Slot-Mount ENG Receiver from Lectrosonics consist of two separate receivers built into a single, ultra-compact housing with adapters for video-camera-receiver slots and for stand-alone use. They can be used when paired with a transmitter & microphone (sold separately) in various environments for ENG (Electronic News Gathering), EFP (Electronic Field Productions) and other audio applications.

Each receiver features Digital Hybrid Wireless technology that provides compandor-free audio quality and compatibility with other wireless systems. The RF performance is stable over a wide temperature range, making the receiver perfectly suited in rough environmental conditions.

The front panel has a menu-driven LCD interface and four membrane switches which are used to view and alter settings. In addition, the LCD window displays the pilot-tone indicator, diversity activity, RF level, audio level, and transmitter battery status for both receivers.

Furthermore, a built-in spectrum analyzer scans across the tuning range of the receiver and displays a histogram of RF activity across the band. Areas of RF activity are easily recognizable. The two internal receivers can be operated separately and both have switching, antenna-combining diversity, or in tandem with ratio-diversity reception.

Finally, a variety of output adapters and mounting options are available for camera-slot operation. The receivers are powered from an external 7 to 18 VDC source.

Professional Film & Theater Applications    2 x Sanken COS-11D Omni Lavalier Mics    2 x SSM Micro Bodypack Transmitters    SRc Dual-Channel Slot-Mount Receiver    SRSUPER SuperSlot Dock Adapter    Compander-Free Digital Hybrid Audio    Adjustable 25/50 mW RF Output Power    Control Transmitter via Remote/App    6-Hour Rechargeable Battery

Fits camera "slots," Lectrosonics Duopack adapter and Octopack multicoupler, and operates stand-alone with various adapters

Dual-receiver design for two channels with phase switched diversity or single channel with ratio diversity operation

Digital Hybrid Wireless with compatibility modes for use with other transmitters

Tracking front-end filters for high performance in tough RF environments

LCD with RF spectrum scanning

SmartSquelch DSP-controlled, noise-based filtering and squelch

DSP-based pilot tone for squelch control

IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)

SmartTune operation for quick and confident frequency selection

Related Questions and Answers

Q: 1. Do non servo ta5f connectors work with the lmb transmitter?

A: Yes, the Lectrosonics L-Series LMb Bodypack Wireless Transmitter and all other Lectrosonics transmitters with 5-pin inputs have servo bias inputs that can also be used with other conventional wiring configurations.

Q: 2. It is possible to combine a Lectrosonics L-Series LMb (B1: 537 to 614 MHz) with a UCR 411A?

A: Yes, the LMb transmitter can be used with all Lectrosonics Digital Hybrid Wireless receivers including the UCR411a when the compatibility mode for the transmitter and receiver are both set to the "Nu Hybrid" compatibility mode. Lectrosonics notes that if your receiver does not have Nu Hybrid mode, then set the receiver to the "Euro Digital Hybrid Wireless" compatibility mode.

Q: 3. Is this compatible with the HMa plug on? I notice a lot of guys are still using the 411a receiver. Is there a big difference?

A: Yes, the LR receiver is compatible with the HMa plug-on transmitter. B&H # LEHMAA1 is the version for this particular receiver's frequency band (A1: 470 to 537 MHz). There are some differences in features between the two receivers such as a wider 75 MHz tuning bandwidth for the LR vs a 25.6 MHz tuning bandwidth for the 411a.

Q: 4. Can you use this with a SRa receiver

A: So long as your SRa receiver has the same frequency ranges as the LMb transmitter, the LMb transmitter will work with an SRa receiver.

Q: 5. Does this wireless kit have the ability to search automatically for available transmission frequencies, like the SONY UWP-D11? From what I understand the Sony kit will automatically select a clear signal, even if for example the transmitter is on the subject, away from the receiver.

A: Short answer: YES! It's called Smart Tune in the setup menu. The receiver does a scan of the entire tuning range and then suggests a choice which you can accept with a button push.

Q: 6. Is it compatible with Sennheiser G4 transmitter?

A: No it is not. Do not mix and match brands.

Q: 7. What is the effective range of the LMB B1 Transmitter? By range I mean distance between transmitter and receiver not frequency range.

A: The operating distance for the Lectrosonics LMb Bodypack Wireless Transmitter and a compatible wireless receiver is approximately 328 feet line of sight.

Q: 8. Where can I find a holder for my Sony camera for this receiver?

A: https://www.bhphotovideo.com/c/product/1095137-REG/lectrosonics_lrshoe_receiver_mount_kit.html/overview?sts=pi&pim=Y

Q: 9. Does this Transmitter have IFB mode to use as an IFB Transmitter?

A: Yes, the Lectrosonics L Series LT Bodypack Wireless Transmitter does have an IFB mode option in the compatibility settings.

Q: 10. Is there a battery eliminator made for this?

A: No,at this time there are no battery eliminators or alternate powering options available for the LMb transmitter.