Improve your workspace's ergonomics with the Atdec A-HDA-0818 Single Monitor Spring Arm Desk Mount. This heavy-duty steel and aluminum mount is designed for monitors, all-in-one computers, and other medium-sized flat displays weighing 17.6 to 40 lb or curved displays weighing 17.6 to 22 lb.

The arm has three points of articulation and is assisted with gas struts for easy adjustment. The universal VESA 75 x 75mm and 100 x 100mm mounting interface enables wide compatibility and a quick-release mounting head enables quick monitor installation and replacement. The mount pans 45° left and right, tilts 45° downward and 75° upward and allows for landscape to portrait rotation. It is height-adjustable by up to 13.4" and can extend forward up to 22.8".

Integrated cable management helps control clutter. A desk-clamp and bolt-through mounting hardware are included. The desk clamp attaches to surfaces 0.39 to 1.97" thick and the bolt-through mount attaches to surfaces up to 2.36" thick.

Steel and Aluminum Construction    Holds 17.6 to 40 lb Flat Displays    Holds 17.6 to 22 lb Curved Displays    Gas Struts for Easy Adjustment    100 x 100mm & 75 x 75mm VESA Interface    Quick-Release Head    Pans, Tilts, Extends, and Rotates    Integrated Cable Management    Includes Desk Clamp and Hardware

Related Questions and Answers

Q: 1. How close can you get it to the wall? Specifically how much distance is there between the last joint and the mounting bracket?

A: Using the Ergotron LX Desk Mount Monitor Arm (White), you could potentially mount a monitor about 3-4" away from a wall.

Q: 2. Is it possible to rotate (pivot) the monitor 90 degrees from horizontal to a vertical position?

A: Yes, it rotates, for horizontal or vertical use.

Q: 3. I have a 27 , 19.4lbs. monitor attach to this stand. No matter how much I tighten the retaining bolt, the monitor always sags downwards. How can I keep my monitor held upright with this system? Thanks.

A: I have the same exact issue with my 24 inch monitor that is attached to the right side. Left side is perfect but ride side sags down ever so slightly. I have accepted it as is. Very weird.

Q: 4. Will this work with two ASUS VE247H 23.6 Full HD 1920x1080 2ms HDMI DVI VGA Back-lit LED Monitors? I've never mounted a monitor before, and I see there is a plate, how do I know what it will fit?

A: Not all monitors are mountable . The ones that are have a clear noticeable 4 holes on the back of the monitor which are standard for any mount. The mount is screwed onto the back of the monitor via these 4 holes. Non-mountable monitors have a clean back with no holes and need to be used with a stand. This particular mount will attach to any mountable monitor. Your investigation should be whether or not these Asus monitors are indeed mountable . Hope this helps.

Q: 5. Is this item compatible with an Apple Studio Display?

A: The Ergotron LX Desk Mount Monitor Arm (White) (100mm x 100mm - 200mm x 200mm) BH #ER45490216 will work with the Apple Studio display with VESA adapter ; Apple 27" Studio Display (Standard Glass, VESA Mount Adapter 100mm x 100mm) BH #APMMYQ3LLA • MFR #MMYQ3LL/A

Q: 6. Are the screws for securing monitor to arms included?

A: Yes - everything is included

Q: 7. Planning to use this mount on a 32" curved monitor and has VESA 100 x 100mm. does this arm support the 32" size??

A: Yes it will: Holds Displays Weighing 17.6 to 49.7 lb Gas Struts for Easy Adjustment 100 x 100mm & 75 x 75mm VESA Interface

Q: 8. I am building a custom desk and want to know how much clearance I should leave in the back in order to use this mount. Would two inches be enough? I Plan to have a crossbar run along the back of the desk but I want to have it be far enough into the desk for this to fit

A: I agree with Dany D. below, 3/4 is enough, 1 to be safe.

Q: 9. Does this item come the 4 screws required for installation?

A: All manner of screws and grommets are included for mounting a on a variety of surfaces.

Q: 10. Will this work with the Gigabyte G32QC?

A: Yes. See specs below. Atdec A-HDA-0818 Specs Load Capacity 17.6 to 39.7 lb (8.0 to 18.0 kg) Compatibility Desk Clamp: Surfaces 0.4 to 2.0" (10.0 to 50.0 mm) thick Bolt-Through: Surfaces up to 2.4" (60.0 mm) thick VESA Compatibility VESA 75 x 75mm and 100 x 100mm Gigabyte G32QC Physical Height Adjustment 3.94" / 100 mm Tilt Adjustment -5 to 20° Mounting-Hole Pattern 100 x 100 mm Lock Slot Yes, Kensington Dimensions (W x H x D) 28.0 x 21.7 x 9.2" / 710.5 x 552.2 x 234.8 mm (with Stand) 28.0 x 16.7 x 4.0" / 710.5 x 423.3 x 102.8 mm (without Stand) Weight 17.20 lb / 7.8 kg