Use the Ready Rig GS Stabilizer + ProArm Kit to transfer the weight of a gimbal-mounted camera away from an operator's arms and shoulders. By redistributing the load to the user's hips and core, this rig enables you to extend your shooting time and lessens operator fatigue. It also reduces the bounce motion sometimes seen during handheld gimbal shots. The Ready Rig GS Stabilizer works with any gimbal in standard or underslung mode.

The Ready Rig ProArms increase the basic GS Stabilizer's load range from 30 to 40 pounds. They telescope from 23 to 37", producing an effective boom range of 55". For greater operating convenience, the ProArms also feature 1/4"-20 and 3/8-16" threads, enabling you to mount an onboard monitor to either arm.

The Ready Rig GS with ProArms features a load capacity range of 1 to 40 pounds, carbon fiber support arms, and an aluminum frame. Its slim, compact profile suits it for use in tight spaces and car interior shots. A soft, zippered carrying case is included with this kit.

Load Capacity Range of 1-40 lb    Vertical Axis Stabilization    Telescoping Carbon Fiber Support Arms    55" Boom Range    Compatible with Any Gimbal    Operate Gimbal Over- or Underslung    Aluminum & Carbon Fiber Construction    Slim, Compact Design    Soft Carrying Case Included

Supports any gimbal or camera rig from 1 to 40 pounds

Adjustable arms telescope from 23 to 37", with an effective boom range of 55"

An onboard monitor can be mounted to the 1/4"-20 or 3/8"-16 threads on each arm

Provides vertical axis stabilization while reducing operator fatigue

Slim, lightweight design with carbon fiber support arms and aluminum components

Operate gimbal in over- or underslung configuration

A soft, zippered carrying case is included in the kit

Related Questions and Answers

Q: 1. I would love this and I think it would work with my tilta armorman 3.0 but my gimbal ring is 25 mm so what shim could i buy to use with the swivel mount ?

A: You would need 25mm to 30mm shims such as these. https://www.bhphotovideo.com/c/product/1156243-REG/cinemilled_cm_700_dji_ronin_m_handlebar_shim.html

Q: 2. I am a pretty big guy. Will this vest and support system fit someone who wears an XXL shirt size? I have more size in my shoulders than belly. Thanks.

A: The belt size ranges from 28-44 on the Ready Rig GS. If you normally wear pants within that size range, this should fit fine.

Q: 3. Will this work for handheld operation? Also would it work with the Letus Helix Pro gimbal?

A: The Ready Rig GS Stabilizer + ProArm Kit with Case can be use for handled shooting when using proper mounting solutions. The Ready Rig GS Stabilizer + ProArm Kit with Case should als be able to support the Letus35 Letus Helix Pro Magnesium Gimbal, but it may be difficult to operate the gimbal, again it would depend on how you mount the gimab to the straps.

Q: 4. to follow up on my last question, I am also 6'2 tall, if that makes a difference? thanks

A: This rig is adjustable for most any operator. One testimonial is from an operator on the TV series 24 He really liked the Ready Rig and he is 6'3 . a href= https://www.ready-rig.com/product/ready-rig-gs/ target= _blank https://www.ready-rig.com/product/ready-rig-gs//a

Q: 5. Can you upgrade to the GS arms later?

A: You are in luck, yes, the original GS can be upgraded with ProArms at a later time.

Q: 6. Will this work with the Ronin-M?

A: Hi Erik,Absolutely, I love mine! I have the Ronin M and the Ready Rig (with standard arms) and it is one of the best accessories I own! It's liberating, no more sore arms. I have been able to shoot continuously with my Ronin M and Ready Rig on jobs for over 4 hours with no fatigue..NO FATIGUE in my arms or back. I cannot comment on the Pro Arms but the standard arm design pefectly supports my Ronin M, Canon 7D MKii w/24 Shot Silencer follow focus, Atomos Ninja Blade recorder and TASCAM DR-70D mounted on the Ronin M cross bar. The Ready Rig is built like a tank and worth every penny. Just my 2 cents. - Chris

Q: 7. Can I order just the ProArms?

A: My understanding is they are available. Please call us so that we can find out if it possible to order them through B&H. B&H 800.606.6969 or 212.444.6615.

Q: 8. Will this work with the DJI ronin 2?

A: Yes, if you keep the overall load of the Ronin 2 with camera at or below 30 pounds. The Ronin 2, B&H # DJRONIN2, weighs about 12 pounds and has a 30 pound load capacity. If the total of the Ronin 2 and camera goes over the 30 pound mark, you will need to look in to the Pro Arm Model, B&H # RERIGGSA, which has a 40 pound load capacity.https://bhpho.to/2CSe72b

Q: 9. What compatibility does the Ready Rig have with a handheld setup? No gimbal -- just a camera on a shoulder mount, for example. Can it be compared with an Easy Rig in this regard?

A: While the ReadyRig is designed to be used with a gimbal and to have both harnesses connect to a gimbal's top bar, it is possible to use this unit with a shoulder mount camera as well. You would probably just want to use a single arm and connect it to the top handle of your shoulder mount camera.

Q: 10. If you buy the standard now can you always add the extended arm?

A: Yes, you can always upgrade to the ProArm Kit at a later date. I would suggest starting with the ProArm Kit.