The Vanguard Alta Pro 2+ 263CT Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 15.4 lb, measures 19.9" when folded, and can be positioned to a maximum height of 47.5", or 59.0" with its push-and-pull, rapid center column fully raised. Its 4-section legs each feature an independent spread as well as twist locks for rapid deployment. When the center column and the legs are retracted, the tripod stands at 18.8". Polymer covers on two of the legs provide a secure, comfortable grip while moving the tripod, and rubber feet help to enhance stability on a wide variety of surfaces.

Tripod heads, cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to top of the tripod's center column. For added versatility, the center column is connected to the tripod by a fulcrum that enables 90° of upwards or downwards tilt that can be locked into place. Additionally, the center column assembly permits 360° of independent rotation. With the ability to push and pull the center column at all times, those tilt and swivel movements allow the center column to be used as an extendable cross arm or a miniature camera boom. This allows an attached camera to be easily raised toward an elevated subject or over a scene. A camera that is placed toward the end of center column can be positioned perpendicular to the tripod, while the legs can be further lowered for a minimum height of 6.1". The camera can then be extended past the tripod's legs, which is particularly useful for copy stand or macro photography. For subjects along the ground, the center column can also be used to obtain low angles while the tripod's user is positioned comfortably behind the camera.

A nylon carry bag with a draw-string closure and shoulder strap is included for storage or transport.

Load Capacity: 15.4 lb    Tiltable & Rotatable Rapid Center Column    Swivel 360°, Tilt 90° Up or Down    Carbon-Fiber Legs, Leg Sections: 4    Maximum Height: 59.0"    Minimum Height: 6.1"    Folded Length: 19.9"    Twist Locks    Rubber Feet    Weight: 3.8 lb

• Supports up to 15.4 lb
• Push-and-pull rapid center column for rapid camera, lens, or sport optic positioning
• Can be set to a maximum height of 47.5", or 59.0" with the center column fully raised
• Tripod stands at 18.8" when the center column and the legs are retracted
• For added versatility, the center column is connected to the tripod by a fulcrum that enables up to 90° of upwards or downwards tilt, which allows the legs to be further lowered for a minimum height of 6.1"
• Center column can be locked at 0°, 15°, 30°, 45°, 60°, 75° or 90° angles
• Center column assembly permits 360° of independent rotation
• Tilt, swivel, as well as push-and-pull movements allow the center column to be used as an extendable cross arm or a miniature camera boom
• Hexagonal shaft design provides center column with increased torsional rigidity
• Legs each feature 4 sections, twist locks for rapid deployment, and can be independently spread
• Legs can be locked at 20°, 40°, 60, or 80° angles
• Polymer covers on two of the legs provide a secure and comfortable grip
• Rubber feet help to enhance stability on a wide variety of surfaces
• Separately-available metal spikes can supplement included rubber feet for use on surfaces such as soft and uneven soil
• Built-in tripod bubble level, ballast loop, and 3/8"-16 female accessory thread for direct attachment of accessories that feature 3/8"-16 mounts
• Weighs 3.8 lb, measures 19.9" when folded

• Carbon-fiber legs
• 1/4"-20 mount

Related Questions and Answers

Q: 1. Can the legs be locked at other angle besides the stated 23, 50 or 80 degree? Some tripod allows the legs to be locked at any angle between 0 and 90.

A: No. This has set angles.

Q: 2. For tripod Alta Pro 2+ 264CT; What is the Max diameter of top leg? and What X carbon is it made, 5X or 6X?I am looking forward to your reply.

A: As per Vanguard, the diameter of the upper leg is 26mm and they use 8X carbon fiber on the tripod.

Q: 3. Where is this made?

A: The Vanguard VEO3+ 303CBS Carbon Fiber Tripod with Ball Head country of Origin is Myanmar (Burma).

Q: 4. Is this ball head compatible with Olympus OMD cameras?

A: Yes, the SBH-100 Ball Head would be compatible with the Olympus OM-D series cameras.

Q: 5. Does it have a built in level?

A: Yes, the Vanguard VEO 3+ 263CP Carbon Fiber Tripod with VEO 2 PH-38 Pan Head has two bubble levels.

Q: 6. What is the Max diameter of top leg? and WhatX carbon is it made, 5X or 6X?

A: I contacted Vanguard with your inquiry, and they state that the diameter of the upper leg is 26mm, and the tripod uses 8K carbon.

Q: 7. Does the Alta PH-114V head come off so you can have just the flat surface for mounting a Rhino ROV Slider?

A: Yes, the Vanguard Alta PH-114V Head is removable from the Pro 2 263AV Aluminum Tripod System, so you can add a slider to the setup.

Q: 8. Can the head be removed?

A: Yes, the Vanguard ALTA PH-32 Pan Head can be removed from the ALTA PRO 2+ 263CP Carbon Fiber Tripod.

Q: 9. what is the difference between Vanguard Alta Pro 2+ 264CT Carbon-Fiber Tripod and Vanguard Alta Pro 2+ 263CT Carbon-Fiber Tripod?

A: The 264CT is shorter, heavier and more expensive.

Q: 10. Is this tripod okay for my Nikon D3500 with NIKKOR 200-500 mm lens?

A: The Vanguard Alta Pro 263ABT 100 Aluminum Alloy Tripod with SBH-100 Ball Head is under for support weight and style for the D3500 with the Nikon AF-S NIKKOR 200-500mm f/5.6E ED VR Lens. These are better options, https://bhpho.to/467rnP6. And it is best to get either one of these for the lens, https://bhpho.to/3X6mVvL .