Designed for large venues, the 120V 29221G Wireline Advantage 108 x 192" Motorized Projection Screen uses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

220" Diagonal / 16:9 Aspect Ratio    HD Progressive 0.6 Surface    0.6 Gain / 170° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface    Flangeless Case

Ideal for high output projectors or applications where projector brightness and screen size require low gain, the gray surface compensates for a brightly lit environment so that image contrast is preserved. In low ambient light, HD Progressive 0.6 provides deep contrast and is typically used with video. Cone: 170° Gain: 0.6

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Case does not have trim flange, making it suitable for non-ceiling-recessed applications.

Related Questions and Answers

Q: 1. Can I use this unit with the Benro A38FD Series 3 Aluminum Monopod with 3-Leg Locking Base without the reducing bushing? Or must I buy the bushing?

A: You don't need to purchase a reducer bushing, as the Benro A38FD has both 3/8 and 1/4 head mounts.

Q: 2. Will this adapter hold a standard-sized cell phone as well as a tablet?

A: No, the Auray IPU-108 Universal Tablet Stand Adapter BH #AUIPU108 is only for tablets that are 7 to 14".

Q: 3. Will the Induro PU-50 plate fit on the Oben ball head?

A: You will need the Oben RB-10 plate for the BA-108 ballhead.

Q: 4. Will this battery fit in an APC J10BLK? The dimensions on the spec sheet are not the same as the actual old battery.

A: Yes, this APC Replacement Battery Cartridge #108 is the repleamcent battery for the APC J10BLK unit.

Q: 5. what is difference between 108 and 108T? Description notes T=travel head but are they not the same specs? Secondly, the included photographs do not show the bottom of the head accepted screws that appear in the collars for various Oben tripods and monopods. Do all Oben heads have those screws for added stability or only some?

A: The BA-108T is almost the same but has a thinner profile. This can be very good if the tripod you are attaching this to has a small base.The BA108T maximum diameter is 1.3 (3.3cm) and the BA108 has a maximum diameter of 1.5 (3.8cm).

Q: 6. Does this have a warranty? I have only used the head two times and it wobbles and busted now. Only a few months old.

A: The Oben BA-108 has a five year manufacturer's warranty. You can contact them through the following link: a href= http://bit.ly/1xu4MDm target= _blank http://bit.ly/1xu4MDm/a

Q: 7. What is this made of?

A: The Auray IPU-108 Universal Tablet Stand Adapter BH #AUIPU108 is metal and plastic.

Q: 8. Would the Oben RP-10 base plate be interchangeable with a Giottos MH652 and vice versa?

A: No. The Oben RP-10 will not fit the the Giottos MH652. However, the RP-20 will fit:Oben RP-20 Quick Release PlateB&H # OBRP20 ? Mfr # RP-20

Q: 9. Does this allow for camera rotation? More specifically forward and backward (up & down)?

A: When a camera is mounted on the Oben BA-108 Single Lever Ball Head, the head will allow a camera to rotate for still photos. It would not work as well for video.

Q: 10. Why can't I make it work? Main mic into input, cables and/or wireless cubes into outputs, right?

A: Hi, yes you have it right - the main microphone gets plugged into the input and you connect the outputs to your destinations with cables or wireless. For help troubleshooting, please call our Pro Audio specialists at 800.606.6969. Thank you for shopping at B&H!