Save your back with the 600N Standard Cinema Flex Vest with 9" Extended Top Bar from Easyrig. Using a suspension line to support a camera rig weighing 26 to 33 lb, this system takes the load off your shoulders, neck, and arm muscles and distributes it across your torso. This lets you shoot for longer periods of time without worrying about arm fatigue. The system consists of a Standard Cinema Flex vest, a 600N shock absorber, and a 9" extended top bar. Also included is a carrying bag for convenient storage and transport of the Easyrig system.

Body-Worn Camera Support System    Reduces Strain on Arms, Neck & Shoulders    600N Shock Absorber    26 to 33 lb Load Capacity    Standard Cinema Flex Vest    Waist Adjustment: 29 to 50"    9" Extended Top Bar    Standard Lockable Camera Hook    3/8"-16 & 1/4"-20 Ball Studs    Carrying Case

• 26 to 33 lb load capacity
• Standard Cinema Flex vest with reinforced upper chest for female operators
• 9" extended top bar
• Standard lockable camera hook (quick release hook available separately)
• Includes two 3/8"-16 and two 1/4"-20 ball studs that can be fastened to a camera, camera cage, or camera handle
• Vest and waist belt made of breathable material
• Made in Sweden

Related Questions and Answers

Q: 1. Does it work with Ronin S?

A: Yes, we actually offer a kit that comes with this Minimax and the Ronin-S, BH #DJRONINSK (B&H Kit). If you have the Ronin-S already and are interested in this Minimax you would just need the Easyrig Quick Release Camera Hook, BH #EAERIGEA033Q, which is included in the kit above.

Q: 2. Is this meant to attach JUST a camera to? Or could you also attach say a Ronin M w/ a7sii?

A: Yes, you can attach Ronin on to this. My rig is about 16lbsand this effortlessly carry tgat. I'm using Ronin 3 axle gimbal with blackmagic production camera with Canon 50mm cine prime lens. very useful rig.

Q: 3. Does minimax works with slightly overweight setup ? Let say my total setup will be around 16lbs-18lbs . Is it still possible or it's a totally no ?

A: NO it will not, overloading the support is not recommended and any damage incurred may void the manufacturers warranty as the device isn't being used withing the designated parameters

Q: 4. I think you have the load capacity wrong for this model. Everywhere else I see it as 17-22lbs. The 11-17lbs looks to be way off. Can you verify?

A: The 400 series is rated for 17-22 pounds.

Q: 5. What is the length of the arm on the minimax?

A: The entire span of the arm is 61 inches or approx. 155cm.

Q: 6. will tilta's top handle hold 7kg camera rig on easyrig minimax? Or just suggest other top handle which i can screw on tilta's bmpcc6k cage.

A: Yes, the Tilta top handle will support your rig on the Easyrig Minimax.

Q: 7. Can you set this up with a ronin rs2 or is it just camera body

A: Yes you can use this with an RS2 as well. You will need to purchase the Easyrig Quick Release Camera Mount (BH #EAERIGEA033Q • MFR #ERIG-EA033-Q) to mount the RS2 on the Easy Rig.

Q: 8. Is Ball Stud Included?

A: It comes with one 1/4"–20 and one 3/8" threaded ball joint for mounting.

Q: 9. Would my Panasonic UX 180 be too light?

A: Yes, the Panasonic UX180 is significantly too light for the 59 to 70 lb Load Capacity of the Easyrig 1200N Standard Cinema Flex Vest with Standard Top Bar & Quick Release.

Q: 10. Can this squeeze into a Pelican 1600 case?

A: No, we are afraid not. The folded Easyrig is 26 long where as the Pelican 1600 is only 21.43 long in it's interior. So we suggest the Pelican 1615Air Wheeled Check-In Case (Black, with Pick-N-Pluck Foam) B&H # PE1615ACWFBK. Its interior is 29.59 long and will easily accommodate the Easyrig.