Designed for large venues, the 220V 29238EG Wireline Advantage 100 x 160" Motorized Projection Screen uses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

189" Diagonal / 16:10 Aspect Ratio    HD Progressive 0.9 Surface    0.9 Gain / 170° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface    Flangeless Case

Ideal for moderate to high output projectors, the light gray surface provides balance between color reproduction and image contrast. Cone: 170° Gain: 0.9

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Case does not have trim flange, making it suitable for non-ceiling-recessed applications.

Related Questions and Answers

Q: 1. Could this hold a Fuji X-T5 with an 18-55 ?

A: Yes, the Trekker Lite HP 100 does fit the Fuji X-T5 with an 18-55mm lens.

Q: 2. Can anyone tell me the dimensions of the LED panel itself? The specs listed by B&H are the same dimensions as the box.

A: The manufacturer states the YONGNUO LED Video light YN160 is 150x116x56mm.

Q: 3. I do not find the info of expiry date... The product photo says its 04/2013. Could you please specify this? Thanks.

A: B&H buys and sells film in bulk. In general we regularly maintain fresh film stock. All of our film is at least 6 months from expiration (typically much longer). Anytime film stock is less than 6 months from expiration we sell it in a separate section and label it as short-dated film and also price it with a slight discount (again due to the volumes we sell this rarely occurs). Unfortunately we do not have access to our inventory to hand inspect the expiration date of any of our films prior to purchase.

Q: 4. How many photos can I take with one film?

A: It is different depending on the camera.if you use these camera.....645 16 pics67 10 pics66 12 pics69 8 pics612 6 pics

Q: 5. Would this work on the Kodamatic pleaser II?

A: No, the Kodak Pleaser II is an instant camera and would take something similar to Kodak Instant Color film, not 4x5" film.

Q: 6. Due to this fact that film negative is highly sensitive to XRays. I want to make sure during the shipping my package will not be exposed to the x Ray at costumes.How can I make sure about it?

A: X rays will only affect film with sensitivities 1600 ISO and above.

Q: 7. Will it fit a Fujifilm X-T30 II with XC 15-45mm lens kit?

A: The FUJIFILM X-T30 II Mirrorless Camera with the FUJIFILM XC 15-45mm f/3.5-5.6 OIS PZ Lens attached does fit in the Lowepro Trekker Lite HP 100 Hip Pack (Black).

Q: 8. What battery and battery charge is required for this light?

A: i Use a large battery that works well for long hours

Q: 9. Will this work on a Sony A7c or A6600?

A: You can mount the YN 160 III light on a camera shoe with the shoe mount including the a7C and A5500 yes.

Q: 10. Does it work for the Kodak Colorburst 250?

A: This film would not work with a Kodak Colorburst 250, since that camera used specific instant film.