Designed for large venues, the 220V 29457EG Wireline Advantage 120 x 192" Motorized Projection Screen uses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

226" Diagonal / 16:10 Aspect Ratio    Dual Vision Surface    0.9 Gain / 130° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface    Flangeless Case

Dual Vision is a flexible vinyl surface ideal for rear projection, but capable of front projection as well. Dual Vision is ideal for video projection under controlled ambient light conditions. With a wide viewing cone and light gray tint, a sharp image with no color shift is observed regardless of location in the room. Cone: 130° Gain: 0.9

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Seamless screen surface

Case does not have trim flange, making it suitable for non-ceiling-recessed applications.

Related Questions and Answers

Q: 1. What does three pronged european plug mean exactly? A grounded schuko or a flat pronged uk plug?

A: Mine was a two prong schuko, not three prong

Q: 2. Would it work with synth? I have an Electribe 2.

A: Yes, this will work with any DAW or controller.

Q: 3. In Sweden we have 230V.. I guess it will still work there as according to a previous question it works in Australias 240V.Will it work in Sweden?

A: Hi Oskar,I think it will work properly in Sweden, I use it in Israel where we have 220V and on the device itself it says 230V so i guess it will be fine.The exact spec written on it is this: 230V 50Hz 2.3A

Q: 4. Will the 3 pronged plug fit into australian wall outlets? Or do i buyban adapter?

A: Yes, you can use an adapter.

Q: 5. CAN this be used as a macro rail?

A: It could be used as a macro rail, but since you would have to loosen and re position by hand it would not be as precise as a rail designed for use as a macro rail like this Manfrotto https://bhpho.to/2xWM0hO.

Q: 6. Will a Canon 7D with 17-85 lens fit in this bag, what would be the largest lens that would fit ok ?

A: Yes, the Canon EOS 7D DSLR Camera with Canon EF-S 17-85mm f/4-5.6 IS USM Lens will fit in the Lowepro Trekker Lite SLX 120 Sling-Style Camera Bag (Black). The bag will fit the Canon 7D with a lens of up to 7" long.

Q: 7. Hi guys, will this one multi-track out the USB? Thanks!

A: The AIR 192|14 will output four channels of audio via USB.

Q: 8. Will this bag hold the Panasonic G9 with an attached Olympus 12-200 f3.5-6.3?

A: Yes, the Panasonic G9 with an attached Olympus 12-200mm f/3.5-6.3 will make a nice camera and lens combo for the Lowepro Trekker Lite SLX 120 Sling-Style Camera Bag (Black).

Q: 9. Would this work as a source for Zoom meetings?

A: Yes, the M-Audio AIR 192|4 Desktop 2x2 USB Type-C Audio Interface could be used as an audio source for Zoom conferencing to facilitate the connection of analog microphones and other external audio devices as desired.

Q: 10. Can it be used to clean the dust off speaker driver (Edifier S3000 Pro)?

A: No, the METROVAC DataVac Electric Duster 500 is not recommended for use to clean the dust off of a speaker driver. The force of the air may be too strong and could permanently damage the speaker. Instead, use a soft brush or a vacuum hose with a soft brush attachment to remove the dust. You could also try to carefully use a can of compressed air in short bursts from a slight distance to avoid damage from the air pressure, but the soft brush is probably the safest method.