Designed with the ability to support two video heads per channel, the ADDERView 4 PRO Dual Link DVI-I Video & Peripheral Switch from Adder allows users to control up to four computer systems and share peripherals between them using a single display, keyboard, and mouse. Dual-Link DVI-I support enables both digital and analog display compatibility at resolutions including 2560 x 1600 for medical imaging, 2048 x 1080 for 2K film post-production, or a maximum of 2560 x 1920. This version of the AV4PRO-DVI provides two total Dual Link DVI-I connectors per channel, allowing multiple video streams from each computer to be switched to two video monitors.

In addition to straight switching, the KVM, speakers, and two separate USB devices attached to AV4PRO-DVI units can either be switched in unison, as normal, or you can mix your peripherals between any of the systems to suit your current tasks. For example, you could be creating emails on one system, listening to a soundtrack from another, sending documents to a printer from a third, and performing a separate task with another USB peripheral on the fourth. The front panel on the AV4PRO-DVI helps make it easy to identify and control which peripherals should connect to each system. Additionally, USB True Emulation technology helps ensure the full characteristics of the connected keyboard and mouse are fully utilized on each system, including extra function keys, wheels, buttons, and controls that are commonly found on modern keyboards and mice.

The ADDERView 4 PRO Dual Link DVI-I Video & Peripheral Switch is well-suited for those working in architecture, graphic design, post-production, animation, banking, command & control, medical, and audio/visual industries. Supported operating systems include Windows, Mac, DOS, Linux, UNIX, BSD, Sun, NetWare, and more. Included is a 20W power adapter, a power cord, and four self-adhesive rubber feet.

Control Four Computers with One Mouse    Supports Two Video Heads per Channel    Supports Dual-Link DVI-I Video    Supports Resolutions up to 2560 x 1920    True Emulation Technology    EDID Emulation    Multiple Switching    Supports USB Peripherals    USB Remote Wakeup    Supports Windows, Mac, Linux, UNIX, Sun

The AdderView 4 PRO features full Dual Link DVI-I video, delivering resolutions at 60 Hz. As the AdderView features DVI-I, you can also use a choice of digital or analog sources. The extended DDC EDID profile helps ensure that the switched graphics card is optimized to work with your screen, and the Dual-Link DVI-I capabilities further enable users to work at resolutions including 2K (2048 x 1080) for film post-production or WQXGA (2560 x 1600) for detailed medical imaging.

The AV4PRO-DVI features Adder's USB True Emulation technology. Emulated USB provides a rapid, reliable switching action and makes keyboard-hotkey and mouse switching possible. It also allows the use of extra function keys, wheels, buttons, and controls that are commonly found on modern keyboards and mice. Users in architecture, graphic design, post-production, animation, and more often need to use specialized interface devices, such as graphics tablets, 3D explorers, joysticks, and so on. The AV4PRO-DVI makes all this possible using Adder's True Emulation technology.

Flexibility is key to the AdderView 4 PRO. The switch enables you to use the KVMA console to work on one computer whilst your USB peripherals are connected to other computers and your speakers are playing music from yet another. You can, of course, still switch all connected devices to any one of the connected computers as with any other KVM switch.

The AdderView 4 PRO can be switched using selectable keyboard hotkeys, 3-button mice, or the front panel controls. Optionally, you can also use the RC4 remote switch to make your selection. These switching options allow you to reassign connected devices to any of the connected computers.

A vast range of USB devices can be connected to the AdderView. From non-standard human interface devices to printers and scanners, this presents great flexibility. For example, you could be scanning a set of documents onto one computer whilst working on another and printing from yet another, all at the same time. The USB 2.0 switching action has been carefully engineered to ensure computer reliability when connecting and disconnecting USB devices.

An 'Options' port enables the AV4PRO-DVI to be remotely switched using simple ASCII codes. When the channel is switched, the same ASCII codes are echoed to the 'Options' port and so, by linking 'Options' ports, two or more units can be switched in synchrony. The port enables a 4-button switch unit (RC4) to be used with the AdderView PRO. The same port can also be used to upgrade the firmware.

USB Remote Wakeup feature is fully supported. Any connected computer can go into sleep mode and be awakened (when its channel is selected) as soon as you press a key or move the mouse. The computer and peripherals must support the USB Remote Wakeup feature.

Related Questions and Answers

Q: 1. Will this work with the Apple 27 display that uses the mini DisplayPort

A: The Adder ADDERView 4 PRO DisplayPort Video & Peripheral Switch B&H # ADAV4PRODPUS is supported as long as its the Cinema Display with Mini Displayport, it will not work with the Thunderbolt display. In order to use it, you will need a simple adapter: B&H # STDP2MDPMF6I https://bhpho.to/2pBlo1h

Q: 2. What is the diameter of the bar?

A: The diameter is .5 inches / 12.7mm.

Q: 3. Does this fit 701HDV?

A: Yes it does. My handle tighten cover broke off, so I used this to replace the whole thing.

Q: 4. will this work with Mevo? or remote cameras?

A: As a Mevo camera does not have an HDMI out, the IOGEAR UpStream Pro Video Production Switch will not directly work with a Mevo, but any remote camera that does have an HDMI out in a supported resolution (1080p 60 / UHD 4K 60), will be supported by either the 2 HD HDMI inputs or the 1 UHD 4K HDMI input.

Q: 5. How well does this work with webcams?

A: The IOGEAR 4-Port KVM Switch BH #IOGUS434 would work very well with webcams.

Q: 6. Hi, would it fit a 502ah model?

A: No it won't. The rosette is way too small and the teeth won't line up. The correct arm is MVAPANBARM.

Q: 7. the Barco MatrixPRO 8x8 DVI Video Matrix Router make cross conversion of 720p to 1080i?

A: The MatrixPRO product line does not scan or convert any of the input formats. These products only route signals. Therefore, you will have to match input formats to the output device.

Q: 8. Does this monitor support HMDI loop-through with HDMI-DVI adapters?

A: While this connection set up with this monitor is unknown, we feel it should work as desired.

Q: 9. Does the transmitter send a standard fiber based DVI-D signal that is compatible with other receivers or monitors that have fiber inputs?

A: Link Bridge also offers the 4802 Two-Fiber Optical DVI Receiver to pair with the Transmitter. Once you have both the transmitter and receiver you will be able to send an DVI signal over Fiber.

Q: 10. Can this fit the MHXPRO-2W fluid head ?

A: Not that we are aware of. This pan handle is not listed as compatible with that head. The proper handle would be a service part which you need to obtain from Manfrotto directly.