The Pelican iM2275 Storm Case is an injection-molded case made of HPX high performance resin, that is virtually unbreakable, dent-resistant and shatter-resistant. It is tough, rugged, lightweight, airtight and watertight. There is a permanently attached Vortex valve that automatically adjusts air pressure without letting in water, and won't unscrew from the case. Press & Pull latches open with the push of a button, yet stay closed securely under impact or stress. The case has unbreakable molded-in hasps that allow the addition of standard size padlocks. It has hinges with integrated feet that hold fast under impact, and create a flat surface for upright stability. It is carried by a double-layered, soft-grip, solid-core handle that provides strong, durable comfort.

HPX High Performance Resin Case    Dent-resistant and Shatter-resistant    Tough, Rugged and Lightweight    Airtight and Watertight    Press & Pull Latches    Unbreakable Molded-in Hasps    Permanently Attached Vortex Valve    Soft-grip, Solid-core Carrying Handle

Injection-molded case made of HPX high performance resin is virtually unbreakable, dent-resistant and shatter-resistant

Tough, rugged and lightweight

Airtight and watertight

Empty case

Meets current FAA requirements for carry-on bags, by fitting under seats and in overhead compartments

Permanently attached Vortex valve automatically adjusts air pressure without letting in water, and won't unscrew from the case

Press & Pull latches open with the push of a button, yet stay closed securely under impact or stress

Two unbreakable molded-in hasps allow the addition of standard size padlocks, offering another measure of security

Hinges with integrated feet hold fast under impact and create a flat surface for upright stability

Molded-in stacking ribs provide no-slip stability for multiple case-stacking during storage or transport

Double-layered, soft-grip, solid-core carrying handle provides strong, durable comfort

• Meets ATA 300 category 1 standards for transit cases
• Meets FED-STD-101C requirements for drops and vibration (loose cargo)
• Meets MIL-STD-810F for immersion and simulated rainfall

Related Questions and Answers

Q: 1. Will it fit with Manfrotto MT055XPRO3 Aluminum Tripod+ Manfrotto 502HD Pro Video Head ?

A: I use mine to store 6 Impact Light Stands and 2 lateral balance arms. 3 of them are LS-96HAB (Large) and 3 are LS-10AB (small) with room to spare. I own a Manfrotto Tripod 3236 with a 3039 still camera head and it would fit in the case with lots of room to spare. I measured all the light stands when bundled up to consider what case I needed - so the specs provided by B&H were accurate. So if you measure your gear and compare to the specs that should be your best judgement for making your final conclusion. I will tell you this - it is a very sturdy case and the wheel casters work very nice over all kinds of surfaces. the pull handle is very sturdy as well. I have been very pleased with this purchase. Sometimes I have to set up a remote studio for some clients and getting my lighting gear to their locations needs to happen as quickly as possible. So if this ends up being the right size for your gear - I can assure you - you will be pleased with how well made and rugged this case proves to be. Hope this was helpful - best of luck - Dan

Q: 2. Will this unit accommodate a CANON G7X Mark II- this camera is a high end point and shoot. I would place it in the scenery position. In other words, horizontal in the case. Would it fit properly?

A: The Pelican iM2050 Storm Case with Padded Dividers (Black) will accommodate a CANON G7X Mark II in the horizontal position

Q: 3. Is ALL the supplied foam (for both lid & bottom) removable from the case, (or is it glued/fixed to the case)? For example, say for rare occasions when one may not want any foam. Thank you for your insight/product knowledge. Mary

A: The foam is removable. It is not glued in.

Q: 4. Does anyone know how deep the base of the case is and the how thick is the egg crate cover is in inches?. The stats say 8.4 inches total. Would like a break down. Want to put a NIKON D610 with battery drive into the case horizontally (tripod socket parallel to the floor of the case). Thanks.

A: Question answered. I bought the unit. No issues.

Q: 5. Is it TSA approved? Can I check it in as a bag?

A: Yes, I have checked them as a bag before.

Q: 6. Want to use with a NIKON D610 with battery drive attached. Would be placed horizontal. Will it be a hard close?

A: The case is 8.4 deep. The camera with battery grip is about 6.5 tall. You will have about 2 to play with.

Q: 7. Could I fit a Sony A7II, Sony Zeiss 55/1.8, Zeiss Loxia 21/2.8, and have spare room for batteries, charger, filters, etc?

A: Its WAY too small for that. I use it as a action cam case for a gopro and 2 other wearables with some mounts. Its smaller than most shoe boxes

Q: 8. Will you offer the iM2275TPKIT TrekPak Case Divider kit?

A: Yes, we will have that listed shortly on our site. Please check back soon.

Q: 9. What is the waterproof rating for this case?

A: The Pelican iM2050 Storm Case Meets MIL-STD-810F for immersion and simulated rainfall.

Q: 10. Does the PELICAN iM2875 STORM TRAK CASE HAVE SUFFICIENT SPACE IN THE INTERIOR TO HOLD ALL THE ITEMS NEEDED FOR ASTROPHOTOGRAPY USING THE CGEM II 9.25? SHOULD PADDING BE PURCHASED WITH THE CASE?

A: The Celestron CGEM II 925 will fit in the Pelican iM2975 Storm Trak Case (Black). You will need to purchase the Pelican Foam Set (8 Piece) B&H # PEFIM2975 and cut to fit.