Offer both wireless and wired network access to your guests with the WAC5302D-S Wireless-AC1200 Dual-Band Access Point from Zyxel. This wireless access point supports the 802.11ac Wi-Fi network standard and operates on both the 2.4 GHz and 5 GHz frequencies supporting wireless data transfer rates of up to 1166 Mbps. In addition to wireless connectivity, this access point comes equipped with three Gigabit Ethernet LAN ports to ensure Ethernet enabled devices have a reliable, wired connection.

Installation is simple as this discrete AP can be placed virtually anywhere, and with 803.at and 802.3af PoE support the device can be powered directly from the network. Once installed, the access point supports up to 16 SSIDs making it easy to configure multiple network names to a single unit. Additionally, this AP offers enhanced wireless security using WEP, WPA, and WPA2 encryption as well as MAC filtering, Layer-2 isolation, and more. Zyxel even includes their own ZON management utility with this AP offering a host of features including IP configuration, IP renew, device reboot, firmware upgrade, password configuration, and more.

802.11a/b/g/n/ac Wi-Fi Standards    Up to 1166 Mbps Wi-Fi Data Throughput    2.4 GHz / 5 GHz (Dual-Band)    2x2 MIMO Spatial Streams    5 dBi / 5 dBi Antenna Gain    3 x Gigabit Ethernet LAN Ports    1 x Gigabit Ethernet WAN Port    Supports up to 16 SSIDs    Versatile Mounting Options    Power over Ethernet Compliant

The Zyxel WAC5302D-S' low profile and versatile mounting design make for easy installation in a variety of locations. For the best aesthetics, the Ethernet cable and coaxial cable can run out from the cable channel that keeps WAC5302D-S slim and fit in a limited space.

Designed for hotel guest rooms, the Zyxel WAC5302D-S features smart antenna and beamforming to dynamically change the signal direction to provide superb performance for each individual client. The Zyxel smart antenna is designed to mitigate interference from neighboring APs next door wherever it is mounted.

More than just a Wi-Fi AP serving high-speed networks, the Zyxel WAC5302D-S has three local Gigabit Ethernet ports to securely attach wired devices while one of these ports supplies PoE power to the attached devices without the need for electric outlets and power cables.

Zyxel one network presents an easy-to-use tool, Zyxel one network Utility (ZON Utility), to realize speed network setup. Zyxel Smart Connect allows Zyxel networking equipment to be aware and recognize each other and further facilitating the network maintenance via one-click remote functions such as factory reset or power cycling. Zyxel One Network redefines the network integration across multiple networking products from switch to Wi-Fi AP and to

Gateway.

Related Questions and Answers

Q: 1. If I buy two of these will they work point to point or bridge?

A: No, it will not work point to point because this an access point not radio.

Q: 2. Does it support VLANs?

A: Yes, the TP-Link EAP610 V2 AX1800 Wireless Dual-Band Access Point supports VLANs.

Q: 3. Can a few of these be combined into a mesh (same SSID, with seamless roaming) ?

A: No, the TP-Link TL-WA1201 AC1200 Dual-Band Wireless Access Point does not support mesh networking.

Q: 4. Can I use the access point to give ethernet access via with wifi connection to router./nternet?

A: The TP-Link EAP653 AX3000 Wireless Dual-Band Access Point must have a wired connection to your router, either directly or via a switch. It will then provide wireless network (Wi-Fi) access to your network.

Q: 5. Which injector should I use for this?

A: Since the Ubiquiti Networks WiFi 6 Pro Dual-Band Access Point does not come with a POE injector, you can use the following POE injector: Ubiquiti Networks 48V PoE Adapter with Gigabit LAN Port BH #UBPOE4824WG • MFR #POE-48-24W-G

Q: 6. Do I need a hardware controller if I want to use 3 of these U6 Pro antennas?

A: For the Ubiquiti Networks WiFi 6 Pro Dual-Band Access Point, you wouldn't need a "hardware controller" per se, but you'd at need some sort of switch and/or injectors to power these APs via PoE+.

Q: 7. What is the difference between this and the Netgear WAX218 AX3600?

A: Netgear WAX620 has a faster RJ45 connection speed. 2.5Gb vs 1Gb.

Q: 8. How exactly this AP can provide 5373 Mb/s over 1000 Mb/s Ethernet?

A: On this Ubiquiti Networks WiFi 6 Pro Dual-Band Access Point, the actual internet speed will be up to 1000 Mb/s, the higher throughput is to help with multiple devices dividing it.

Q: 9. It says "Down-tilt Antennas", how does that work then it can be wall, desk or ceiling mounted? Do you set the mounting position via SW? Also, I want to mount it on the basement wall or ceiling, does it do up-tilt?

A: So for this item it would radiate wireless signal in a sphere. So direction of the antennas would not impede speed or distance. Nor would the devices orientation, however placement in structure such as a basement would be limiting its effective range.

Q: 10. does this include a power adapter?

A: The TP-Link EAP223 AC1350 Wireless Dual-Band Access Point, B&H # TPEAP223, does not include a power adapter.