Equipped with nine 850nm semi-covert IR LEDs, the black VARIO2 PoE i4-1 Medium-Range IR PoE Illuminator from Raytec provides up to 472' of infrared illumination to help night vision cameras produce clear images in even total darkness. The unit's interchangeable lens system with HRT is designed to deliver even illumination without causing overexposed white spots. Three lenses are included, a 10 x 10° circular, a 35 x 10°, and a 60 x 25° elliptical lens.

PoE technology simplifies installation by enabling data and power to travel via a single cable. Suitable for outdoor use, the illuminator is housed in an IP66-rated weather-resistant enclosure.

850nm Infrared Wavelength    Up to 472' IR Range    Three Interchangeable Lenses    10 x 10°, 35 x 10°, 60 x 25°    9 x Semi-Covert IR LEDs    Hot-Spot Reduction Technology    Runs on PoE    U-Bracket Included for Installation    IP66-Rated for Outdoor Use

The VARIO2 PoE illuminator can be plugged into network infrastructure to simplify installation.

The angle of illumination can be quickly and precisely adjusted by changing the VARIO holographic lens insert to match your camera's field of view.

Hot-Spot Reduction Technology (HRT) produces a highly diffused elliptical beam to deliver more light where it is needed, maximizing illumination range and minimizing light wastage. HRT also prevents overexposure of foreground objects.

An LED status indicator is built into the illuminator for quick feedback on status and performance.

The VARIO2 pairs Platinum Elite SMT LED technology with the Cool Running thermal management system for flexible and reliable performance.

The programming inputs on both the VARIO remote control (available separately) and the VARIO2 illuminator can be disabled if required. Additionally, the remote control can be given a PIN code to lock-in settings and limit access.

Green features including power adjustment and telemetry control make for energy savings. The optional remote control offers timer functionality.

• Power adjustment from 20 to 100%
• Built-in photocell for automatic on/off
• Photocell sensitivity adjustment
• LED status indicator can be switched on/off

• Timer function (up to 30 minutes)
• Remote dimming
• Restore factory default settings
• Optional PIN to lock in settings and limit access
• Remote control can be disabled for improved security

Related Questions and Answers

Q: 1. Is this a POE+ (at) compatible unit?

A: This is not POE+, this is 24V.

Q: 2. Will this work with the Ubiquiti U6-LR

A: The Ubiquiti Networks POE-24-30W-G-WH PoE Injector (24 VDC, 30W, White) BH #UBPOE2430WGW will not support the Ubiquiti Networks U6-LR UniFi 6 AX3000 Long-Range Access Point BH #UBU6LRUS which requires higher voltage (DC Input Power - 44 57 VDC Power Consumption - 16.5 W). The Ubiquiti Networks 48V PoE Adapter with Gigabit LAN Port B&H # UBPOE4824WG is recommended.

Q: 3. would it work with UniFi 6 Long-Range Access Point?

A: The Ubiquiti Networks U-POE-af PoE Adapter BH #UPOEAF will power the Ubiquiti Networks U6-LR UniFi 6 AX3000 Long-Range Access Point BH #UBU6LRUS.

Q: 4. Will this work with a PTZ camera or an audio controller that uses POE+?

A: The Ubiquiti Networks U-POE-AT PoE+ Adapter is designed to power PoE devices from Ubiquiti specifically. The manufacturer does not advise using this with non-Ubiquiti products, as it may not function correctly.

Q: 5. Is the 120 power supply/cord included?

A: The Ubiquiti Networks U-POE-AT PoE+ Adapter (BH # UBUPOEAT) includes a 100 to 240 AC at 50/60 Hz power supply with a North American wall outlet plug.

Q: 6. will a dinion IP starlight 7000 fit in this housing?

A: The camera is a little bit wider that this housing.

Q: 7. Without a reset button on the PoE injector, how does the remote reset capability work?

A: When you run the Ubiquiti software, Unifi software will be able to find the unit on the network and then reset the Ubiquiti Networks U-POE-af PoE Adapter.

Q: 8. Can this be used as a stand-alone poe/lan adapter for a poe camera on an existing non-ubiquiti network?

A: As long as the camera supports 24V POE, however this unit was designed primarily to work with most Ubiquiti products.

Q: 9. what 5g antennas do you have?

A: Here's the current models B&H currently sells from Ubiquiti: a href= http://bhpho.to/15w02GN target= _blank http://bhpho.to/15w02GN/a

Q: 10. Will This power Cloud Key Plus, UCK-G2-PLUS?

A: The Ubiquiti Networks U-POE-af PoE Adapter BH #UPOEAF will work with the Ubiquiti Networks UniFi Cloud Key Gen2 Plus BH #UBUCKG2PLUS which requires Standard 802.3af PoE