For a flashlight under 6" long, the Nitecore TM28 Tiny Monster Rechargeable boasts an impressive list of capabilities, including a 6000-lumen maximum output, a minimum setting that will run for more than 40 days, and an OLED text display of the torch's vital signs.

Its head has four white Cree XHP35 HI LED emitters that shine at five output levels, plus location beacon, SOS, and disorientating strobe. The low output is ideal for reading or rummaging in a pack, while the turbo mode is designed for search and rescue efforts that require the brightest possible illumination. You'll know the status of your TM28 without having to decipher a code of blinking LEDs because the text display shows brightness level, battery level and voltage, remaining runtime, charging status, and operating temperature. A single, intelligent two-stage push button switch controls all the output and mode functions in an easy-to-use interface.

The aluminum alloy housing has a hard-anodized black finish to resist corrosion and scratches. The emitter lens has anti-reflective coatings on both sides and is tempered to be resistant to breaking and scratching. This durable light is impact-resistant to 5' and submersible to 6.6'. To help prevent over-heating, hardened heat-dissipating fins are machined into the head. Protection circuitry also prevents heat damage by monitoring the temperature and will automatically step-down the output or shut off the light if it gets too hot. There's a lockout function to prevent the light from being turned on accidentally while in transport or storage, and the four 18650 batteries recharge on-board, using intelligent circuitry that knows just how much juice they need.

2, 320, 1000, 2300, 6000 Lumens    Four White Cree XHP35 HI LEDs    Strobe, SOS, and Signaling Modes    Two-Stage Push Button Body Switch    Momentary and Constant-On Modes    OLED Text Status Display    Type III Hard Anodized Aluminum Housing    IPX8-Rated Submersible to 6.6'    Integrated Circuitry Protects Light    Powered by 4 x 18650 Batteries

• Min: 2 lumens
• Low: 320 lumens
• Med: 1000 lumens
• High: 2300 lumens
• Turbo: 6000 lumens (when using IMR batteries)
• 4 x Cree XHP35 HI LEDs
• Smooth PDOT aluminum reflector optimizes available light and minimizes light loss
• Bright center cone of light with large, dimmer peripheral ring
• Emergency SOS beacon automatically cycles through Morse-code sequence
• Disorientating strobe-mode
• Flashing signal beacon

• Location: Handle
• Type: Two-stage push button
• Momentary and constant-on modes
• Click switch to activate Turbo mode
• Press switch half-way to select output level
• Click while on any output to turn off
• At any output, half-press and hold to activate turbo output, half-press again to return to previous output
• Intelligent switch remembers last output selected
• Rapid double-click to activate strobe. While in strobe-mode, press button half-way to activate SOS, press again for signal beacon
• Dual lock-out functions prohibit accidental activation

• Provides constant feedback on state of light
• Displays selected lumen output and intensity level
• Temperature feedback to prevent over-heating
• Provides approximate remaining runtime
• Shows charging state and voltage
• Display function button provides real-time information

• Lightweight and durable aluminum alloy housing
• Corrosion and scratch-resistant type III hard-anodized finish
• Impact-resistant to 5'
• IPX8-rated, waterproof and submersible to 6.6'
• Dual-sided anti-reflective coated and tempered glass emitter lens
• Stainless steel bezel protects lens against drops and impacts
• 1/4"-20 socket to mount on tripod to use as hands-free area lighting
• Flat tailcap allows light to be stood with head facing up
• Hardened, heat-diffusion fins help prevent over-heating
• Charging port cover maintains IPX8-rating
• Square anti-roll head

• Integrated power indicator
• Voltage detection system optimizes charge time
• Over-charge protection prevents damage to batteries
• Over-heat circuitry steps output down to prevent damage
• Charging port: Charge batteries without removing from flashlight

Related Questions and Answers

Q: 1. Will this cause flicker artifacts when filmed with the sony fx9 and sony 24mm gm?

A: Unfortunately, there is no information on whether the LEDLENSER P17R Core Rechargeable LED Flashlight is flicker free.

Q: 2. has anyone tried mounting this flashlight onto a camera? is there banding when used with a digital camera?

A: This hand held mount is made for these flashlights, Nitecore Handle Mount Kit for TM Series Flashlights BH #NINHM10

Q: 3. warrenty?

A: Lighting products with built-in battery 24 months

Q: 4. Is that battery replaceable? I'd like to carry a spare and swap them when necessary.

A: Yes, the battery for the Nitecore P20i UV Rechargeable Tactical LED Flashlight with UV Light is replaceable: https://bhpho.to/3P14Kol

Q: 5. Is the red light usable at night for night vision with a telescope or does it only flash with the blue light to look like police?

A: The red works in flashing mode on the side only not in the main Flashlight

Q: 6. Does this come with batteries?

A: Yes it comes with batteries(no name brand) red colored if I remeber

Q: 7. Will this cure UV resins? Looking specifically at fly tying epoxies rated around 365nm

A: No

Q: 8. Do i need to buy battery/charger separately? and if so which ones

A: The batteries are CR123A. You need 2 of them. They are available as standard (non-rechargeable) as well as rechargeable. I bought the Watson brand batteries with the charger and so far they seem to work fine. I don't have anything to compare them to.

Q: 9. How do I change the focus on the P6R?

A: By turning the lamp head whilst moving it forwards or backwards, the light can be focused for maximum beam distance or defocused for even illumination of the close-up area. The manual can be found on this link, https://bit.ly/3l8wE1Z

Q: 10. How do you recharge the battery, and what hardware do you need to do this?

A: The Nitecore TIKI LE USB Rechargeable LED Key Chain Flashlight is rechargeable by the USB-C cable which is not included in the purchase of this item.