The AdderLink X-DVI PRO MultiScreen KVM Extender from Adder lets you relocate a set of peripherals, which includes two DVI-D monitors, two speakers, and four USB devices, up to 164' away from a computer system. The provided transmitter and receiver modules deliver 1920 x 1200 visuals, stereo-quality sounds, and USB signals via two user-supplied CAT 5e, 6a, or 7a cables. Resolutions and distances are dependent upon the type of networking cable used.

The transmitter module comes with two 3.5mm audio-in, two USB 2.0 Type-B, and two DVI-D inputs. Adder includes cables for most of these connections. To connect with monitors, external storage drives, speakers, keyboards, and mice, the receiver sports two DVI-D outputs, two 3.5mm audio-out jacks, and four USB 2.0 Type-A ports. In addition, full-speed (12 Mb/s) isochronous devices are supported.

2 x DVI-D, 2 x Audio, 4 x USB 2.0 Type-A    DVI-D Signal with Stereo Audio    Extends System Access up to 164' Away    Uses CAT5e/6a/7 Cables    Supports Resolutions up to 1920 x 1200    DVI-D, USB, and Audio Cables Included

The AdderLink X-DVI PRO MultiScreen extender uses an uncompressed system to send every pixel of every frame without loss

HDMI video and audio can be extended with an optional adapter cable, however, HDCP and CEC are not supported

The X-DVI PRO MultiScreen sends one video signal as well as USB 2.0 data and audio along a single CAT 5e, 6a, or 7a cable, and a second CATx cable is required to support a second video signal

Four USB 2.0 ports enable connection of mice, keyboards, graphics tablets, jog shuttles, joysticks, 3D explorers, and mass storage devices

The transmitter unit is powered by two bus-powered USB ports on the host computer, while the receiver module runs on an included power adapter

The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer

With no need for drivers or software to be installed, the AdderLink X-DVI PRO MS extender is delivered in a zero-config state so you can plug the units in and start working with them straight away

Stereo CD-quality sound (stereo channel 16-bit sampled at 44.1 kHz) is available to transfer audio from local to remote for line out

The extender supports 8 channels of HDMI audio simultaneously with analog audio

Related Questions and Answers

Q: 1. Does this device support thunderbolt daisy chaining to other thunder bolt devices such as docking stations?

A: You can connect multiple Thunderbolt 4/USB-C devices (including docking stations) to the Sabrent Thunderbolt 4 KVM Switch via it's three Thunderbolt 4 ports, or connect USB-A devices to one of it's four USB-A ports.

Q: 2. Can wireless keyboard and mouse be used with a pc laptop and mac mini and studio display setup?

A: Yes, as long as the wireless mouse and keyboard are using USB wireless receivers. If they are connected via bluetooth, you will need to change the connection over to the second computer manually.

Q: 3. Is there a delay when using this extender? If so, how much?

A: The Comprehensive Pro AV/IT HDBaseT 4K60 18G HDMI Extender Kit has zero latency.

Q: 4. Does the power supply have standard European or Brazilian adapters?

A: The Comprehensive Pro AV/IT HDBaseT 4K60 18G HDMI Extender Kit does not include any international adapters but the included power adapter is compatible with 100-240V power and so can be used with a converter plug to power the unit.

Q: 5. Is this cable for going from PC with DVI to monitor with HDMI, from PC with HDMI to monitor with DVI, or both?

A: Double checked and I have DVI from PC/Laptop to HDMI to Monitor.

Q: 6. What types of fiber work best with this unit? OM1, OM2, OM3, OS1 my distance between points is 150'

A: The Gefen EXT-DVI-FM500 DVI FM 500 Extender BH #GEED500 supports fiber cables with these specifications: Duplex, LC-terminated, Single-Mode or Multi-Mode (OM1 (62.5/125‚µm), or OM2/OM3/OM3e/OM4 (50/125‚µm)) The BH #CACMX2LC0250 is a good option.

Q: 7. We have a male DVI-D connector that we need to adapt to thunderbolt. Will this work with DVI-D or only DVI-I?? Thanks

A: Hi , I use this to connect my apple cinema display DVI-D in my Mac via Bluetooth.The DVI-D transmit only Digital Signal and DVI-I transmit Both (Digital and Analog).The digital signal is passed in both DVI-I and DVI-D, a DVI-D male connector can be used with either DVI-I or DVI-D females. A DVI-I male connector, though, can only be used with a DVI-I female.I Hope this helps.

Q: 8. On the AGM website, it shows a 5 yr warranty. Why does your site show only a 3 yr warranty? Does it come with a scope base?

A: It is a "5" warranty as stated in the AGM website. I will notify my website content team of the error.

Q: 9. Can the rj45 port pass POE? I want to use the HDMI for video and power a camera from the Ethernet port.

A: This product comes with a POE Extender Kit. It has POE.

Q: 10. I am wanting to put this in the middle of a set up I have. Thus it is not going from computer into a projector, it will be in the middle of a run. Will it still work?

A: Will it work? Yes. Will there be any issues caused by the length of cables on either side of it? Unknown. But if you want to contact me, we can talk about it. You can call Draco Broadcast technical support at 408-229-9222. // Also, if there are any other technical or product related questions, feel free to contact us directly at any time at support@dracobroadcast.com.