Maximize the potential of your AirTTL-equipped flashes through the use of an Air Remote TTL-O from Profoto. This powerful remote provides you with an outstanding set of features, including support for wireless power control and TTL, including high-speed sync, with Olympus and Panasonic cameras, as well as compatibility with the Profoto Control and Profoto Camera apps for iOS and Android. Operating on a 2.4 GHz frequency, the Air Remote can sync with flashes up to 1000' away with normal triggering and 330' with TTL. TTL is useful because it offers automated shooting and exposure and brings the advantage of high-speed sync, enabling the use of shutter speeds up to 1/8000 second. Also, the controller has 8 channels and 3 groups, ensuring minimal interference with other nearby systems and equipment. Each group can be controlled independently from one another, permitting ±2 EV adjustment of power ratios for TTL systems and nine stops of manual control. You have access to remotely turn on/off the modeling lights or heads, making it easier to adjust lights in your studio. Additionally, there is a mini-USB port for installing firmware updates and it runs on just two AAA batteries.

Manual and TTL Control of AirTTL Flashes    Manual Control of Air Flashes    Range: 1000' (Normal) / 330' (TTL)    8 Channels; 3 Groups    High-Speed Sync up to 1/8000 Second    Nine Stops of Manual Power Control    ±2 EV of TTL Power Ratio Control    Turn On/Off Modeling Light & Heads    Mini-USB Port for Firmware Updates

AirTTL flashes and packs, such as the B1X and Pro-10, fully support TTL communication from an Air Remote TTL-O and a compatible Olympus and Panasonic camera. This makes shooting incredibly simple as the camera and flashes automatically determine the best power settings for the scene in order to produce a properly exposed image.

In addition to TTL and manual controls, with AirTTL flashes and packs you can make use of both with hybrid operation where an initial exposure is captured with TTL and then the system is switched into manual where it retains the exposure settings.

By using TTL, users can enjoy almost automatic flash exposure in a range of conditions as well as the ability to access high-speed sync for using shutter speeds up to 1/8000 second. When using TTL, power ratios between groups can be adjusted from ±2 EV.

A 2.4GHz radio system ensures exceptional reliability with ranges up to 1000' in standard sync modes and 330' with TTL/HSS.

Users can choose between eight different channels to help minimize interference with other nearby systems and control up to three groups of light on each channel.

A mini-USB port is available for installing firmware updates.

Olympus

OM-D E-M1 III

OM-D E-M1X

OM-D E-M1 II

OM-D E-M1

OM-D E-M5 III

OM-D E-M5 II

Pen-F

OM System

OM-1

Panasonic

Lumix S1

Lumix S1H

Lumix S1R

Lumix S5

Lumix GH5

Lumix GH5 II

Lumix GH5s

Lumix G9

AirTTL (TTL, HSS, Remote Control, Manual Sync)

B1 500 AirTTL
B1X 500 AirTTL
B2 250 AirTTL
D2 200 AirTTL
D2 1000 AirTTL
Pro-10 2400 AirTTL

Air (Remote Control & Manual Sync)
D1 Air 250
D1 Air 500
D1 Air 1000
D4 Air 1200
D4 Air 2400
D4 Air 4800
Pro-B4 1000 Air
Pro-8a 1200 Air
Pro-8a 2400 Air

Related Questions and Answers

Q: 1. I have read that the Air Remote TTL-C should fire Profoto D1. I can not seem to make that happen. My profoto air remote will fire both my D1 and my B2's. I am trying to have the air remote TTL-C fire D1 without having the light on Slave. I have them on the same channel, can someone let me know if they have done this and how?

A: should be as simple as having them both on the same channel. Try setting the lights to different groups. maybe put the D1 on group D

Q: 2. Will this remote work with the Profoto A1X?

A: Yes, the Profoto Air Remote TTL-S for Sony is compatible for use with the Profoto A1X AirTTL-S Studio Light for Sony.

Q: 3. Does this work with the B1? I only see B1x listed.

A: This remote will work with a B1.

Q: 4. Does this work with a7R IVA?

A: Yes. The following remote is designed and made to communicate with Sony protocol system.

Q: 5. After I shoot about 3 frames with this trigger my B1x light pops way up to FULL (10) power and there is a loud pop sound. It happens on both of my heads and in both Manual and TTL modes. This never happened with my old Pocket Wizard so trying to figure out if its a setting issue?

A: Try to update the firmware from the Profoto website, this may correct the problem.

Q: 6. Will this remote work with the Leica Q2?

A: For Leica you can use the manual transmitter. https://bhpho.to/2YDZ2g7

Q: 7. Will this work with Canon R3 High Speed Sync?

A: Yes this transmitter BH #PRARTTL will work with a EOS R3.

Q: 8. Is the HSS worth it? I am looking to be able to use it during afternoon sun for weddings. Working with a 5D III and i think the first version of the b1 500 air ttl. I have the normal Profoto receiver but it is not capable of HSS.

A: I shoot with the Cannon 5D Mark IV. My Profoto B1x and the B1 ETL air remote work fantastic together. I shoot aperture priority and let the shutter speed go as high as it wants.

Q: 9. Which version works with the Leica SL2?

A: At this time, Profoto does not have a Leica-specific TTL transmitter. To utilize the Air triggering system in select Profoto units along with the Leica SL2, you may use the Profoto Air Remote Transceiver, BH # PRAR which offers manual control.

Q: 10. Does this work with the a9 and Nikon z6ii and D750?

A: No, the Profoto Air Remote TTL-N for Nikon is deigned and made for Nikons protocol system only.