The 3GSFE 3G-SDI Fiber Extender Kit from Osprey is designed to transport 3G-SDI signals over extended distances using fiber optic cable. This solution can be used to transport signals up to 12 miles. This kit consists of a USB-powered transmitter and receiver with 3G-SDI and LC single-mode inputs and outputs.

3G-SDI Signal Extender    Supports up to 12-Mile Range    USB-Powered    TX with 3G-SDI Loop-Through Output    RX with Dual Reclocking 3G-SDI Outputs    TX/RX LC Single-Mode Input (SFP)

Use this set to extend 3G-SDI signals over fiber optic cable

Supports a range of up to 12 miles

3G-SDI and LC single-mode inputs and outputs

Related Questions and Answers

Q: 1. What is displayed on screens when no signal is present? I have a project to build that requires monitoring five inputs; will I be constantly staring at three blue screens on the unused inputs?

A: On the Osprey MVS-8, when no signal is detected on the SDI input, the screen shows the VU meter on the left, the time stamp at the top, and a blue screen background. With an SDI monitor connected to the SDI out, the monitor shows a blue screen.

Q: 2. Will this output 1920x1080I @59.94?

A: Hi Casey,I bought this hoping that it would output 1080i so that I could convert the 1080p from my GoPro 4 for the ATEM studio. I returned it because I could not get it to do so, it passed through the 1080p and the GoPro was again not recognized by the ATEM studio.

Q: 3. Has anyone measured latency of the SDI version vs the HDMI version on the same camera? Curious if the SDI version has significantly less delay.

A: No it does not. the delay from the camera to the Newtek Spark is almost non existent when compared to the delay that happens when converting a video signal to be sent across a network and the bandwidth limitations of said network. If you purchased both the SDI and HDMI versions and hooked them up to a cameras on the same network you should experience the same delay.

Q: 4. Does this unit output SDI level A? Having issue converting HDMI to SDI on Atomos for switching. Only type A supported. Blackmagic converter did not work.

A: The AJA HDMI to SD/HD-SDI Video and Audio Converter does not support level A & B. Please consider the following model that will support Level A & B SDI. https://bhpho.to/3t06xhJ

Q: 5. Does the Lilliput 668GL 70NP/H/Y 7 have a touch screen?

A: I'm afraid that this does not have a Touch Screen. You would control the monitor through the menu dials. However we do have other on-camera options with a touch screen, such as the Delvcam DELV-TOUCH-10 10.1 HDMI Touchscreen LCD Monitor.

Q: 6. What is the total power consumption in watts for POE use?

A: The NewTek Spark Plus I/O 4K uses the 802.3af PoE standard and requires 15.4 Watts of power. POE AF injector idea - https://bhpho.to/3Xjmqy6

Q: 7. Does this monitor feature aspect ratio guides and focus peaking?

A: Thank you for your question . The model 667 supports 50fps and 60fps signal ,without focus peaking function . If you want to aspect ratio guides and focus peaking with HDMI input ,please chose model 665/O/P or 663/O/P2 ,thanks.

Q: 8. I saw a review that said this does not work with a Black Magic camera. Is that indeed correct? I have a Black Magic Pocket Cinema Camera.

A: It will work just fine...you will need a hdmi to mini hdmi cable to connect them...and go

Q: 9. Will this convert a 4k signal out of a Sony A7S II to work on a 1080p production monitor?

A: That one will not handle 4K. You could use this one. (Note: Special Order delay of 7-10 days) WyreStorm Express 4K Downscaler and HD Upscaler with Dolby Digital Downmixing B&H # WYEXPCON4KDD

Q: 10. Would this monitor be compatible with a 4k camera such as the Sony a6300? Was thinking of using it with a DJI Ronin M.

A: Thank you for your inquiry . the model 667GL-70NP/H/Y accepts 50fps and 60fps signal only , so it doesn't support 4K Camera ,please buy LILLIPUT 7 Q7 for 4k camera ,thanks Joanna