Corsair Keyboard Led Mode Control

Desisti Super Led F4.7vw Vari-white Led Fresnel Manual Operated Spotlight

Product Code: ga44608
Availability: In Stock

$8,285.82 $10,108.70

Qty

7 reviews Write a review

Description
Reviews (7)

The Super LED F4.7 Vari-White LED Fresnel Spotlight from DeSisti features a variable white phosphors LED array that provides the ability to modulate the correlated color temperature from a minimum of 2800K to a maximum of 6600K, and has an enhanced CRI (Color Rendering Index) higher than 94 at any CCT within the range. The fixture is DMX-controlled for 0 to 100% dimming, has a step mode for CCT control in increments of 400K every 10% of DMX variation, and has a continuous mode for CCT control. It combines spot/flood beam control on an equivalent focus range to a conventional lamp fresnel with the use of barndoors. The fixture comes with a manual lock yoke for comfort and ease of handling.

Key Specs
Item Type	1x LED Fresnel
Included Light Modifier	1x Barndoors
Included Storage Case	No
Photometrics	57° at 2800K: 469 fc / 5058 Lux at 3.3' / 1 m* 52 fc / 562 Lux at 9.8' / 3 m 29 fc / 316 Lux at 13.1' / 4 m 19 fc / 202 Lux at 16.4' / 5 m 12° at 2800K: 2745 fc / 29,556 Lux at 3.3' / 1 m* 305 fc / 3284 Lux at 9.8' / 3 m 279 fc / 3005 Lux at 13.1' / 4 m 179 fc / 1923 Lux at 16.4' / 5 m 57° at 6600K: 529 fc / 5697 Lux at 3.3' / 1 m* 59 fc / 633 Lux at 9.8' / 3 m 33 fc / 356 Lux at 13.1' / 4 m 21 fc / 228 Lux at 16.4' / 5 m 12° at 6600K: 3409 fc / 36,702 Lux at 3.3' / 1 m* 379 fc / 4078 Lux at 9.8' / 3 m 213 fc / 2294 Lux at 13.1' / 4 m 136 fc / 1468 Lux at 16.4' / 5 m *Standardized Measurement Calculated Internally Based on Closest Distance
Color Temperature	2800 to 6600K
Color Modes	Daylight, Tungsten
Color Accuracy Standard	CRI 95 TLCI 96
Dimming	Built-In Dimmer (Continuous) • 0 to 100%
Front Accessory Mount	5-1/8"
Power Source	AC Power (Cable Included)
Input Power	90 to 250 VAC, 50 / 60 Hz
Power Consumption	75 W
Fixture Mounting	1x 5/8" Receiver (Via Yoke Mount)
Light Fixture
Item Type	1x LED Fresnel
Included Light Modifier	1x Barndoors
Included Storage Case	No
Photometrics	57° at 2800K: 469 fc / 5058 Lux at 3.3' / 1 m* 52 fc / 562 Lux at 9.8' / 3 m 29 fc / 316 Lux at 13.1' / 4 m 19 fc / 202 Lux at 16.4' / 5 m 12° at 2800K: 2745 fc / 29,556 Lux at 3.3' / 1 m* 305 fc / 3284 Lux at 9.8' / 3 m 279 fc / 3005 Lux at 13.1' / 4 m 179 fc / 1923 Lux at 16.4' / 5 m 57° at 6600K: 529 fc / 5697 Lux at 3.3' / 1 m* 59 fc / 633 Lux at 9.8' / 3 m 33 fc / 356 Lux at 13.1' / 4 m 21 fc / 228 Lux at 16.4' / 5 m 12° at 6600K: 3409 fc / 36,702 Lux at 3.3' / 1 m* 379 fc / 4078 Lux at 9.8' / 3 m 213 fc / 2294 Lux at 13.1' / 4 m 136 fc / 1468 Lux at 16.4' / 5 m *Standardized Measurement Calculated Internally Based on Closest Distance
Color Temperature	2800 to 6600K
Color Modes	Daylight, Tungsten
Color Accuracy Standard	CRI 95 TLCI 96
Dimming	Built-In Dimmer (Continuous) • 0 to 100%
Cooling System	Fan
Expected Lamp Life	50,000 Hours (L70)
Beam Angle	12 to 57°
Built-In Flash	No
Preprogrammed Effects	No
Umbrella Mount	No
Front Accessory Mount	5-1/8"
Lens
Lens Type	Fresnel
Lens Diameter	4.7" / 11.9 cm
Lens Material	Borosilicate Glass
Connectivity
Mobile App Compatible	No
Power & I/O
Power Source	AC Power (Cable Included)
Inputs/Outputs	1x XLR 5-Pin DMX Input 1x XLR 5-Pin DMX Output 1x powerCON Power Input 1x powerCON Power Output
Input Power	90 to 250 VAC, 50 / 60 Hz
Included Adapter / Cable	1x Bare Ends to powerCON Cable (9.8' / 3 m)
Inline Switch	No
Power Pass-Thru	Yes
Power Consumption	75 W
Mounting
Yoke Type	Manually-Operated Yoke
Fixture Mounting	1x 5/8" Receiver (Via Yoke Mount)
General
Environmental Resistance	Dust/Water-Resistant (IP22)
Certifications	CE
Materials	Steel (Housing)
Dimensions	13.8 x 7.8 x 6.8" / 35.1 x 19.8 x 17.3 cm (Fixture with Yoke)
Weight	7.7 lb / 3.5 kg

Variable white CCT technology, with a range from 2800K to 6600K

Manually operated

High output optics with the flexibility of variable color temperature

50,000-hour LED array life

Universal A/C input voltage from 90 to 240V

0 to 100% dimming via DMX 512

Silent dimming with little to no color shift

Universal powerCON AC input

Shock resistant borosilicate glass Fresnel lens on spring supports

Automatic, thermal stabilization of the LED operating temperature is managed by an internal thermal sensor and CPU, variable speed fan and heat sink to maintain the LED Array's constant temperature at a maximum of 65°C

Hydrodynamic bearing fan operates silently with a very low RPM

Related Questions and Answers

Q: 1. Can this be powered up with v-mount batteries?

A: No, it cannot use a V mount battery.The battery used has to meet these specifications;Output Voltage 23-36 voltsBattery Operation Temperature68 95 degrees FMinimum Capacity5.5 AHPower Outlet Connector4-pin XLR Connector

Q: 2. Are these bright? Some led fresnels can be soft.

A: This fixture is very bright.

Q: 3. Which is the best mount for the L7-C LE2 LED Fresnel for using on location?

A: A Matthews Hollywood Combo Steel Stand - 14.75' (4.5m) B&H # MALSCHWT would be a suitable stand to hold this light on location.

Q: 4. Is this fresnel attachment compatible with GVM's new Pro monolight series? Like the 500, for example?

A: No, the GVM F40 Fresnel Attachment for LED Light Spotlight is designed for te following models and will not adapt to the pro line cob systems Compatible with PR, SD, and P8 series GVM lights GVM-PR150D GVM-SD200D GVM-SD-300D GVM-P80S-II

Q: 5. What is the simplest configuration/accessory list to stand just one of these ARRI fresnels on the floor?

A: Using the Avenger A2009 Turtle Base for C-Stand (Chrome-plated) B&H # AVA2009 would be the easiest way to get an Arri L7-C LE2 LED Fresnel closer to the floor.

Q: 6. What set of barn doors will work for the Arri l5-c?

A: Arri B&H # ARBD4F650 K5600 B&H # K5BDJ400

Q: 7. i am interested in getting these lights as a 2 or 3 light kit and also are there any current Arri cases that will work with these light for location work?

A: While there is no case from Arri that will fit 2 or 3 of the L5-C units, we do have a case which fits the L7-C and will also fit a single L5-C. Please see the link to the item: a href= http://bhpho.to/1DkO4uM target= _blank http://bhpho.to/1DkO4uM/a

Q: 8. What battery option will work for this instrument?

A: You may use the Anton Bauer CINE VCLX Battery B&H # ANCVCLXB connected via 4 XLR with the BLUESHAPE PWC34 3-Pin XLR Male to 4-Pin XLR Female Power Cable (10') B&H # BLSPWC34 to power the L5-C.

Q: 9. My GVM PROSD200B is not listed as being compatable with the F60 fresnel lens. Does GVM make a fresnel lens for the 200D?

A: The GVM F60 Fresnel Lens for LED Light Spotlight is not compatible on the GVM 200d. However, this one would be: B&H # GVMF40 (https://bhpho.to/4c6h4NC).

Q: 10. 60201 lux at 1 m and 6689 lux at 1mtwo different phonetic values seems, what is the exact luminescence of this arri l7-c?

A: This is the Photometrics form Arri on the the ARRI L7-C LE2 LED Fresnel. At 3m 15 degrees the light is 6689 lux at 3200k and at 5600k it is 7511 lux. The link for that information is, https://bhpho.to/3QdxrzK And Arri does not list the Lumens on the light only lux.

Ron	14/09/2024
I bought this for use both with my 60d and my 60x. I must say it really exceeded my expectations. I used it with a 60d to front light a stage with full length windows behind, and the spot easily filled in the daylight that backlit the performer. I've also used the spot with the included gobos and iris to create interesting light spills in music videos. This unit is lightweight, sets up quickly and is very, very versatile. And it puts out a surprising amount of light. With the iris you can get a concentrated pin spot as small as one inch or as wide as 10 feet (depending upon your distance from the subject). I would say that this Spotlight kit is a must have for anybody serious about lighting. 5

Victor J	07/09/2024
I’ve always loved the design of Nanlite fixtures and this is another fresh new look. It’s pretty lightweight for a 500W fixture. And the price is perfect for my budget! I have used this for ton of productions already and now looking to add either additional FC-500B or the FC-300B. 5

Jay	02/09/2024
Best versatile light,good for photography and videos and it also pairs good with the godox tl60 tube lights and could be paired with the godox remote 5

Girard	16/08/2024
I originally purchased these lights with the intention of having a more compact 3-point setup instead of lugging a set of LS600Cs around. For the most part, it has worked out well and the quality and reliability has been proven for me on over ten several hours long shoots. Pros: Easy to setup and configure Feature-rich, especially considering the price point Workhorse grade build quality Color accuracy is solid Has DMX (though you need an RJ45-to-XLR5 adapter) Works with wireless CRMX receiver and has a USB port that can power them(!) Cons: No v-mount or proprietary battery offered by Godox; have to go third party IMO, output is better than the SZ150R and the Amaran 300c, but still leaves a little to be desired The zoom feature isn't really all that effective and you'll still need to keep grids on hand The dimming setup is still fairly bright When COB is fully retracted, there is a minor hotspot All in all, a good light that could be great if Godox made a battery kit and adjusted some things with future firmware updates. 5