The blue Handheld DSLR Camera Stabilizer from YELANGU is a mechanical stabilizer supporting cameras weighing up to 6.6 lb. When your DSLR or mirrorless camera is correctly aligned, the stabilizer can be used to isolate unwanted movements when operating the camera.

Attach your DSLR or other small camera to the quick release plate using either the 1/4"-20 or 3/8"-16 camera screw, then adjust the balance using the sliding plate and the counterweights. With practice, you'll be able to pan, tilt, and boom smoothly.

Lightweight 3-Axis, Mechanical Gimbal    Supports Cameras up to 6.6 lb    Telescoping, Carbon Fiber Center Post    Sliding Quick Release Plate    6 x Counterweights    1/4"-20 & 3/8"-16 Screws Included    Blue-Accented Hardware    Soft Case Included

Related Questions and Answers

Q: 1. Will this work with either of my Panasonic Lumix FZ1000 or FZ2500?

A: Yes it should. This stabilizer supports cameras that weigh up to 6.6 pounds. It should work well with those Panasonic cameras.

Q: 2. You guys buy used equipment

A: We do have a department that purchases used equipment. Please visit the following web link to find out more. https://bhpho.to/2TiNEFY

Q: 3. Can I use this unit with my Canon XA30?

A: The YELANGU Handheld Stabilizer will be compatible with the Canon XA30.

Q: 4. can i use with my Panasonic Lumix gh4?

A: Yes, this is designed to work with DSLR and Mirrorless style cameras. It has a load capacity up to 6.6 pounds. It should work well with the GH4.

Q: 5. Is working with Canon Vixia HF M41? Thank You!

A: You can mount and balance the Canon Vixia HF M41 on this stabilizer.

Q: 6. Can I use a manfrotto 501 plate (already on my cameras) on this stabilizer out of the box or do I need to buy a separate adapter plate?

A: That is not possible out of the box. However you can purchase the Manfrotto 577 Rapid Connect Adapter with Sliding Mounting Plate (501PL), B&H # MA577, to use the 501PL plate on this stabilizer. https://bhpho.to/2mRIakh

Q: 7. would a Pansonic AG-CX350 balance well on this unit? The weight is 4.19lbs, I assume the heavier the better it handles on stabilization?

A: This has a 6.6 pound load capacity, so it is possible. However we would tend to recommend something like the B&H # FLCMRK for a camcorder the size of the CX350. You will have better results with this we feel. https://bhpho.to/3m6Vw9a

Q: 8. Can I use this with Sony a6000?

A: You can use this with the Sony a6000, but you will not be able to use the weights that come with the S60T. Instead, purchase some washers at a hardware store in a variety of thicknesses and use those as weights. That is what I did in order to use my Nikon D3300.

Q: 9. Will it work with Panasonic G6 and 14-42 kit lens? Is my camera too light for this steadicam?

A: This should work with the Panasonic G7 using a 14-42mm lens, B&H # PADMCG7KB. It has removable counter weights on the bottom, you can have less weights on the gimbal to balance a lighter set up.

Q: 10. Can i use this with my Sony RX10 II bridge camera?

A: Yes, we believe this Handheld DSLR Camera Stabilizer will also work with a Point and Shoot camera like the Sony RX10 II.