With a guide number of 190', the E300 Flash Head from Godox is a 5600K daylight-balanced flash source with solid core features at an affordable price point. The head features 0.4 to 2.5 sec recycling with flash durations as short as 1/2000 sec. Power is variable over 3 stops from 1/8 to full power, while the 150W modeling has 9 levels of dimming. Settings are indicated on the rear digital screen and adjustable via padded push buttons that are a pleasure to use. Triggering options include sync cord, test button, and slave triggering. Wireless control is available with separate purchase of the FT-16 radio system. The head also has an anti-preflash function that makes it easy to work with point-and-shoot and other cameras that employ preflash. At just 3.3 lb, it's easy to assemble a kit with 2 or more E300s without lugging a heavy case around. The light has a tilting stand mount with an umbrella channel and runs on 100 to 120 VAC mains power.

300Ws, 5600K Color Temperature    0.4 to 2.5 Sec Recycling    Flash Duration: 1/800 to 1/2000 Sec    Optional FT-16 Radio Triggering    100-120 VAC    3-Stop Power Range    150W Modeling Lamp    Anti-Preflash Function    Umbrella Input and Stand Mount

• Precise output displayed on LED panel, 20 steps from 1.0 to 3.0 in 0.1 increments
• Use optional FT-16 trigger to control the flash power ratio, modeling lamp and buzzer, as well as flash triggering
• 150W modeling lamp adjusts in 9 power levels
• Outstanding output stability, no more than 2% shift at the same output
• Anti-preflash function enables synchronization with cameras that have a one-preflash firing system
• Auto memory and recovery of adjusted panel settings

Related Questions and Answers

Q: 1. What are the dimensions of this light?

A: Godox H2400P Flash Head has a dimension of 4.7 x 13. The braket attached is 5.3'' long.

Q: 2. Is there a snoot that can be used with this?

A: Currently there is no fixture specific snoot for this item.

Q: 3. Can I use my Pocket Wizards to trigger this thing? Considering it for a background light.

A: You could use PocketWizards via the 3.5mm sync port or you could use the built in X series receiver with a Godox transmitter.

Q: 4. My wife just bought 2 of these thinking they would work with my Xt-1 trigger but it looks like I need the 16 trigger? Is that right?

A: Yes, this Godox E300 requires the Godox XT-16 trigger to fire it.

Q: 5. Every time I press Test on either the strobe or my godox trigger the power output goes to its lowest strength. How to I stop this ?

A: Please make sure that you wait more than three seconds between the time when you change the setting on your Godox QS600II Flash Head (B&H# GOQS600II) and the time you fire it or switch it off. That way the memory function should hold the setting. If you experience further problems then please contact us by phone, chat, or email and let us know how you are using it and what you are seeing on the display panel of the strobe.

Q: 6. If I buy a Godox X1R receiver for use with the E250, can I use my X1Ts to fire the flash wirelessly?

A: The trigger that is needed for this monolight is the Godox XTR16 Wireless Power-Control Flash Trigger Transmitter B&H # GOXT16. https://bhpho.to/2POsXN7

Q: 7. can this be used wirelessly too?

A: Yes, with the optional FT-16 radio trigger.

Q: 8. will Godox E300 work with canon EoS 200D mark II and canon EoS1500D with wire communication sync chord,etc without wirelss?

A: The Godox E300 can work with a synch cord or by using the optical slave.

Q: 9. Is the reflector included?

A: The reflector is included.

Q: 10. Does this plug into the wall? Or do I need a Godox power bank?

A: You need the Godox P2400 Power Pack BH #GOP2400 to power the H2400P Head.