The Schneider 6.6 x 6.6" Radiant Soft 1/4 Filter can be applied to purposely reduce the appearance of blemishes and wrinkles while a glowing effect is applied to skin tones. An array of small, two-dimensional particles distributed within the surface of this filter smooths fine lines and textures, which can be useful for creating a more flattering result of a subject.

This filter has a grade of 1/4. Grades of 1/2, 1, 2, 3, 4, and 5 are also available where this filter type's effect becomes approximately twice as strong with each grade number increase. The small particles within a Radiant Soft filter are optimized to effectively maintain existing contrast and highlights even while higher grade numbers are used.

The Schneider 6.6 x 6.6" Radiant Soft 1/4 Filter is constructed from water white glass for clarity as well as color fidelity. It is compatible with filter holders that can accommodate 4mm-thick, 6.6 x 6.6" rectangular filters.

Reduces Subject Blemishes and Wrinkles    Glowing Effect for Skin Tones    Maintains Contrast and Highlights    Water White Glass Construction    Padded Pouch

• Compatible with filter holders that can accommodate 4mm-thick, 6.6 x 6.6" rectangular filters
• Reduces the appearance of blemishes and wrinkles
• Creates glowing effect for skin tones
• Maintains contrast and highlights
• Constructed from water white glass for optical clarity
• Padded pouch included for storage and transport

Related Questions and Answers

Q: 1. Are the copywrite character overlapping with the letter ‘c’

A: No it does not look like the lettering overlaps with the copywrite character at all.

Q: 2. Anyone have issues with reflections? I just purchased and when filming light I'm getting reflections on the glass. Any tips on not getting that?

A: In my former career, I was a motion picture camera assistant. As such, part of my job before each take was to make sure there were no reflections or hot spots of light hitting the front lens element or the filters. I would use a matte box with top and side flaps to get rid of most of the problems. The rule of thumb was if I was using a longer lens, I could take care of it with the matte box and flaps. However, if using a very wide lens, a matte box and flaps are no good because if you set the flaps to get rid of the flare or hot spot, they are visible in the frame. When that happened, I would ask one of the grips to set a flag at the source of the flare, be it a movie light or the sun. If it was a moving shot, the grip would have to "fly" the flag to make sure the light did not hit the lens. Now, what can a regular guy do without a grip department? Use a sunshade or matte box or a french flag. You might be able to move the offending light or the camera enough to get rid of the flare. Just know if you cannot stop the extraneous light from hitting the front end of the lens, it will be in the image to some degree.

Q: 3. Would this work well with the Tilta Mini Matte Box? Also would you recommend the linear or circular for a Sony FX30 camera?

A: Yes, the Schneider 4 x 5.65" Linear True-Pol Polarizing Filter would work perfectly with the Tilta Tiltaing Mini Matte Box. Also, here are a few screw on filter options for Sony FX30 lenses. PolarPro 82mm QuartzLine Circular Polarizer Filter BH #POCP82Q B+W High-Transmission MRC-Nano Master Circular Polarizer Filter (82mm) BH #BWCPHTM82

Q: 4. To figure out the size of the push-on lens cap - what is the OD of the filter?

A: any filter size plus 3mm

Q: 5. Can I charge this battery with a VariZoom SC-302 Sequential Battery Charger?

A: Yes the Core SWX 14.8V Lithium-Ion NP-1 Style Battery Pack would charge on the Varizoom SC-302. The Varizoom charger is Multi-Chemistry and charges Lithium-Ion batteries.

Q: 6. Will it work plugged into the DJI Pocket 2 Do-It-All Handle (CP.OS.00000122.01)?

A: The Saramonic LavMicro U3-OP Omnidirectional Lavalier Microphone for DJI Osmo Pocket (6.6' Cable) is not compatible with the DJI Pocket 2 Do-It-All Handle.

Q: 7. The add says the d-tap is on the side - do they mean the long side or the short side (the end)?

A: The D-tap port is located on the short side of the Core SWX NP-L9.

Q: 8. Does this battery have the traditional NP-1 battery contacts, or just a D tap?

A: It has both the NP-1 contacts as well as a D-tap port.

Q: 9. Is there any light loss with these filters?

A: From testing in the store, we saw no visible change in exposure, likely indicating a 1x filter factor and almost complete light transmission (minus any potential loss from coatings and glimmerglass particulates).

Q: 10. Can these newer batteries be charged with the Swintronix NG-4LJ 4 position charger Made for older Swintronix NP-L60 Lithium Batteries?

A: Yes, they can be charged on the NG-4LJ.