A company already known for creating benchmark products, Broncolor raises the bar to even loftier heights with the introduction of the Scoro S 3200 Wi-Fi RFS 2 Power Pack. Due to revised hardware and software, Bron users can now control the functions of the pack with mobile devices such as smartphones, tablets, and computers.

The Scoro S boasts advanced features photographers have come to expect from this industry leader. Bron provides independent control of the 3 flash outlets' power in 1/10 or 1 stop increments over a range of 11 stops. Settings can be viewed on the highly visible illuminated LCD display. ECTC technology (Enhanced Color Temperature Control), aimed at preventing color shift over the entire output range, is onboard. You can also use it to select your own color temperature in 200K increments.

Bron has introduced Speed Mode into the Scoro S which reduces the recycle time and flash duration by up to 50%, while the maximum output is reduced by 25%. This allows you to trigger up to 10 flashes per second at full power and up to 50 exposures at reduced settings. Fan cooling prevents overheating the pack.

Recycling is stunningly fast - 0.02 to 2 seconds in Normal Mode and a lightning fast 0.02 to 1.2 seconds in Speed Mode at 120 VAC. Known for very fast flash durations, the Scoro S doesn't disappoint. The shortest flash durations are 1/10,000 at t0.1 and 1/14,000 at t0.5 in both Normal and Speed Modes. The Broncolor

Scoro S 3200 Wi-Fi RFS 2 has a 100 to 240 VAC power supply for worldwide use.

3200Ws    Enhanced Color Temperature Control: ECTC    3 Individually Controlled Head Outlets    11-Stop Range: 1/10 or 1 Stop Increments    100-240 VAC    Normal and Speed Modes    0.02-1.2 Sec Recycling (120V Speed Mode)    Flash Duration 1/10,000 @ Min. t0.1    Wi-Fi and Radio Triggering Options    Illuminated Silicone Keypad

Flash duration and light output are the two decisive factors in light control.

A microprocessor in Scoro and Move power packs will calculate for you the shortest or longest flash duration for a given output. This enables rapid flash sequences with up to 50 flashes per second.

Scoro S, Scoro E, and Move are the only studio flash systems that can maintain color temperature over the entire power range at all outputs or when needed, can be changed to calibrated steps of +/- 200K at constant power. The second generation of the patented ECTC (Enhanced Color Temperature Control) technology, which adapts flash voltage and flash duration to each other, achieves a constant color temperature over the entire variation range.

When multiple lamp heads are connected, constant color temperature is guaranteed on all channels up to an asymmetry of two f-stops.

The Scoro S has three lamp outlets. Each lamp outlet has an individual power controller with LED display, which is adjustable independently of the other outlets. The unit therefore behaves like three independent power packs. You have a choice of up to 11 f-stops to set the flash output you need.

In Speed Mode, the charging time and flash duration are reduced by up to 50% while the power is reduced by 25%. In this way, you can achieve up to ten shots per second at full output, or up to 50 at reduced power. This makes the Scoro S 3200 Wi-Fi RFS 2 a top-class flash unit for fashion shoots, and with its fan cooling, even long flash series are no problem.

All Scoro S 3200 Wi-Fi RFS 2 functions can be radio-controlled using an optional transmitter or thanks to revised hard and software can be conveniently controlled by the bronControl app. Using a Wi-Fi connection, mobile devices (smartphones and tablets) as well as desktop computers are able to communicate with this high-end power pack.

Adjusts automatically to the line voltage.

Related Questions and Answers

Q: 1. Does this unit have 1 pin contact??? Does its also have PC sync attachment?

A: There is a single pin on the shoe and it accepts a miniphone to PC male cable on the side.

Q: 2. Does this do HSS with Sony cameras? or is it just Canon and Nikon?

A: This transceiver does not offer HSS with any Canon, Nikon, or Sony camera. It would fire any Broncolor strobe with a built in or connected RFS receiver. A strobe head such as the Broncolor Siros L 800Ws Battery-Powered Monolight B&H # BRS800LWFR2B would offer a short flash duration with the use of this remote as a way of stopping action. Please see the image below for reference.

Q: 3. Is it possible to sync two Broncolor Scoro 1600 E Wi-Fi RFS 2 packs in order to use up to 4 lights simultaneously?

A: You can set the packs and transmitters to allow for using two packs and four heads at once.

Q: 4. Does this work with Canon?

A: Yes. Unit will work with any traditional hot shoe on the market.

Q: 5. Will this work with the Broncolor Verso A2?

A: This transmitter is not directly compatible with the Verso A2. The correct transmitter for Verso A2 is B&H # BRTRFS MFR # B-36.130.00.However, the Verso A2 can be updated to be compatible with the RFS2 series at an Authorized broncolor Service Center.

Q: 6. Will this Transceiver work with the Broncolor grafit a2 31.169.07 model unit?

A: Unfortunately, this unit will not work with the Broncolor Grafit A2 RFS as the transceiver is not backwards compatible.

Q: 7. Does this transceiver work with the Panasonic S1H?

A: The RFS2.1 is compatible with all standard flash shoes for sync at the camera's rated flash sync speed (X-Sync), but not HS flash sync.

Q: 8. What is the approximate recycle time of the Scoro 3200 E at 2400 Ws?

A: flash energy: 3200 J f-stop: 90 2/10 charging time: 0.02 – 1.3 s, speed mode 0.02 – 0.8 s (230 V) up to 50 flashes per second control range over 11 f-stops in 1/10 or 1/1 f-stop intervals

Q: 9. Do you think Scoro 3200 E can produce enough short light duration that could stop the action like mid air levitating dancer or water splash?

A: Yes, depends on shooting environment but I would suggest shooting in a dark environment and have high-Speed Flash Sync on Your Camera enabled.

Q: 10. How would you connect up two Scoro S 3200 RFS 2 Power Packs to have more than three heads operate at the same time?

A: Each individual pack can support up to three separate lamps/heads, and multiple packs operating on the same RFS 2 radio frequency can all be synchronized and controlled from the same RFS2 Transmitter.