This brown, compact Microphone Madness MM-PSM Pro Series Omnidirectional Earset Mic delivers clear spoken-word and vocal reproduction for presenters and performers working in music, theatrical, broadcast, house of worship, lecture, and presentation settings. It comes with a Hirose 4-pin connector that plugs into select Audio-Technica bodypack transmitters.

The MM-PSM Pro Series earset features a 3mm capsule mounted on a short 3.4' boom that can be discreetly positioned away from the mouth for an unobtrusive fit. The earset can be worn on either the left or right ear and feels natural when used for extended periods of time. The extremely flexible boom is virtually unbreakable.

The capsule delivers full-frequency (20 Hz to 20 kHz) audio performance and high gain before feedback for detailed speech intelligibility. The 145 dB of dynamic range makes this mic well suited for loud vocal performances in houses of worship and on the musical stage. The mic's omnidirectional polar pattern offers enhanced plosive protection with no proximity effect for a natural sound.

All MM-PSM Pro Series microphones are made in the USA.

For Stage, Broadcast, Public Speaking    Omnidirectional Pickup Pattern    3.4" Boom/Low-Profile/Single-Ear Design    Hirose 4-pin Connector    Made in the USA

• Hirose 4-pin connector for compatibility with the following Audio-Technica wireless transmitters: ATW-T35, ATW-T75, ESW-T211, ATW-T601, ATW-T701, AEW-T1000, AEW-1000A, ATW-T1001, 600 Series, 700 Series, 1000 Series, 1200 Series, 4000 Series, 5000 Series, 7000 Series, System 10, and System 10 Pro

Related Questions and Answers

Q: 1. Are there certain settings you'd use this mic with the zoom H1, for a wedding?

A: I've used .wav format, 48khz 24 bit, lo cut off, and auto level off settings with a Zoom H1 with this mic to record wedding ceremonies and had good success. You'll have to play with the input level because each shooting scenario will vary but I always normalize in post with Adobe Audition anyway. Keep in mind this mic will only record the voice of the person it's attached to.

Q: 2. Is the 1/8 inch jack straight or a right angle?

A: It is at a right angle.

Q: 3. How long is the cable?

A: 6 foot long from mike to plug tip. Hope this helpsJack

Q: 4. Does this version have the locking (screw-on) 3.5mm jack? Such as for a Sennheiser G3, or DR-10L?

A: No, this microphone has a non-locking 3.5mm TRS connector for use with a recorder, camera or a device with a standard mic input. We do offer the omnidirectional Microphone Madness Lavalier Mic for Select Sennheiser Systems in black (B&H # MIPSMLSRBL) or beige (B&H # MIPSMLSRBE) as a special order item. We do have a selection of other mics that are compatible with Sennheiser transmitters and the DR-10L. Please feel free to contact us through live chat or by phone if you would like further assistance. You can reach us by phone at 800-606-6969 or 212-444-6615.

Q: 5. Does this come with a bag or case?

A: No it does not include a case. In the Box: Microphone Madness MM-MSLM Omnidirectional MatchStick Lapel Microphone (Black) Windscreen Limited 1-Year Warranty Suggestion: Pelican 1010 Micro Case (Clear Yellow with Colored Lining) B&H # PE1010MCCY - https://bhpho.to/2FCYS0T

Q: 6. Do I need an adapter to use this microphone with my Sennheiser EG-2 transmiter?

A: Yes. This 4-pin connector style (ch) is not compatible with Sennheiser transmitter bodypacks.

Q: 7. What are people using to mount these, and to minimize clothing noise?

A: It's really more about where you are mounting these rather than about what you are mounting it with.I use basic Rycote Undercovers as the sticky element and then I find a dead spot under the subject's clothing.

Q: 8. can I used this with the saramonic wireless transmitter receiver system?

A: Yes you can.

Q: 9. Will this mic work in the Canon 70D dslr?

A: Yes, this mic will work with the 70d.

Q: 10. Is this compatible with the Canon 5D mark 3 camera?

A: Yes - the Canon EOS 5Dmk3 offers the requisite plug-in power .