This black, compact Microphone Madness MM-PSM Pro Series Omnidirectional Earset Mic delivers clear spoken-word and vocal reproduction for presenters and performers working in music, theatrical, broadcast, house of worship, lecture, and presentation settings. It comes with a Locking 3.5mm TRS connector that plugs into select Azden bodypack transmitters.

The MM-PSM Pro Series earset features a 3mm capsule mounted on a short 3.4' boom that can be discreetly positioned away from the mouth for an unobtrusive fit. The earset can be worn on either the left or right ear and feels natural when used for extended periods of time. The extremely flexible boom is virtually unbreakable.

The capsule delivers full-frequency (20 Hz to 20 kHz) audio performance and high gain before feedback for detailed speech intelligibility. The 145 dB of dynamic range makes this mic well suited for loud vocal performances in houses of worship and on the musical stage. The mic's omnidirectional polar pattern offers enhanced plosive protection with no proximity effect for a natural sound.

All MM-PSM Pro Series microphones are made in the USA.

For Stage, Broadcast, Public Speaking    Omnidirectional Pickup Pattern    3.4" Boom/Low-Profile/Single-Ear Design    Locking 3.5mm TRS Connector    Made in the USA

• Locking 3.5mm TRS connector for compatibility with the following Azden wireless transmitters: 15BT and 35BT

Related Questions and Answers

Q: 1. What is the guarantee on this lavalier?

A: The Lav by RODE comes with a limited one year manufactures warranty against defects

Q: 2. Does this version have the locking (screw-on) 3.5mm jack? Such as for a Sennheiser G3, or DR-10L?

A: No, this microphone has a non-locking 3.5mm TRS connector for use with a recorder, camera or a device with a standard mic input. We do offer the omnidirectional Microphone Madness Lavalier Mic for Select Sennheiser Systems in black (B&H # MIPSMLSRBL) or beige (B&H # MIPSMLSRBE) as a special order item. We do have a selection of other mics that are compatible with Sennheiser transmitters and the DR-10L. Please feel free to contact us through live chat or by phone if you would like further assistance. You can reach us by phone at 800-606-6969 or 212-444-6615.

Q: 3. Is this compatible with the Canon 5D mark 3 camera?

A: Yes - the Canon EOS 5Dmk3 offers the requisite plug-in power .

Q: 4. would these work for a wireless system? for example, the new Rode Wireless Go system or Sennheiser XSW kits? do transmitters typically provide the plug in power needed for these lavs?

A: This will work with the Rode Go systems very well, I've used them together in the past and overall had a good experience. However it does not work with Sennheiser wireless system since they have a proprietary locking pin, so when buying lavs for Sennheiser systems it either needs to be made buy Sennheiser or for Sennheiser.

Q: 5. Will this mic work in the Canon 70D dslr?

A: Yes, this mic will work with the 70d.

Q: 6. Looking at this, the Countyman B6 and the Sanken COS-11D for a documentary I'm doing for a hospital in a small African country this summer. I know the B6 and 11D are highly regarded, but given the $ and my need for 2-3 mics while paying for them out-of-pocket, I want to find the best bang-for-buck without sacrificing a lot in sound quality. My big question before trying it is, how is the self-noise and handling-noise on this unit? Thx in advance.

A: The Microphone Madness MM-MSLM is an excellent microphone for the money, relatively quiet, and not too bad on the handling noise. You may want to pick up some hush lav quieting sleeves (used with the sanken lavs) to better isolate the microphone from rustling noise. Also, please not the microphone requires power via bias voltage; 1 to 9 VDC.

Q: 7. What are people using to mount these, and to minimize clothing noise?

A: It's really more about where you are mounting these rather than about what you are mounting it with.I use basic Rycote Undercovers as the sticky element and then I find a dead spot under the subject's clothing.

Q: 8. Can you use this with a MixPre 3 II recorder? Else is there another preferred wired lav?

A: It is not recommended to connect a lapel microphone directly to the 3.5mm Aux/Mic input on the Sound Devices MixPre-3 II. The Saramonic DK3A Premium Omnidirectional Lavalier Microphone could, however, be connected to the XLR inputs on the MixPre-3 II using an XLR adapter that converts phantom power such as the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (BH #ROVXLRP): https://bhpho.to/3JrNPql

Q: 9. Does this come with a bag or case?

A: No it does not include a case. In the Box: Microphone Madness MM-MSLM Omnidirectional MatchStick Lapel Microphone (Black) Windscreen Limited 1-Year Warranty Suggestion: Pelican 1010 Micro Case (Clear Yellow with Colored Lining) B&H # PE1010MCCY - https://bhpho.to/2FCYS0T

Q: 10. can I used this with the saramonic wireless transmitter receiver system?

A: Yes you can.