This beige, compact Microphone Madness MM-PSM Pro Series Omnidirectional Earset Mic delivers clear spoken-word and vocal reproduction for presenters and performers working in music, theatrical, broadcast, house of worship, lecture, and presentation settings. It comes with a 3.5mm TRS connector that plugs into select Azden bodypack transmitters.

The MM-PSM Pro Series earset features a 3mm capsule mounted on a short 3.4' boom that can be discreetly positioned away from the mouth for an unobtrusive fit. The earset can be worn on either the left or right ear and feels natural when used for extended periods of time. The extremely flexible boom is virtually unbreakable.

The capsule delivers full-frequency (20 Hz to 20 kHz) audio performance and high gain before feedback for detailed speech intelligibility. The 145 dB of dynamic range makes this mic well suited for loud vocal performances in houses of worship and on the musical stage. The mic's omnidirectional polar pattern offers enhanced plosive protection with no proximity effect for a natural sound.

All MM-PSM Pro Series microphones are made in the USA.

For Stage, Broadcast, Public Speaking    Omnidirectional Pickup Pattern    3.4" Boom/Low-Profile/Single-Ear Design    3.5mm TRS Connector    Made in the USA

• 3.5mm TRS connector for compatibility with the following Azden wireless transmitters: WM-PRO, WLT-PRO, 32BT, and 31LT

Related Questions and Answers

Q: 1. Is this the mic that comes with the UwMic9 wireless package or a different/better one?

A: No. This is the higher quality Mic.($99 for Mic alone). The one in the UwMic 9 is a lower quality Mic.

Q: 2. Are there certain settings you'd use this mic with the zoom H1, for a wedding?

A: I've used .wav format, 48khz 24 bit, lo cut off, and auto level off settings with a Zoom H1 with this mic to record wedding ceremonies and had good success. You'll have to play with the input level because each shooting scenario will vary but I always normalize in post with Adobe Audition anyway. Keep in mind this mic will only record the voice of the person it's attached to.

Q: 3. Is the DK3A compatible with the Blink 500 pro? If not can you recommend a premium level product that is.

A: Yes, the Saramonic DK3A Premium Omnidirectional Lavalier Microphone is compatible for use with the transmitters in the Saramonic Blink 500 Pro B2 Digital Wireless Omni Lavalier Microphone System.

Q: 4. Is the 1/8 inch jack straight or a right angle?

A: It is at a right angle.

Q: 5. Will this mic work in the Canon 70D dslr?

A: Yes, this mic will work with the 70d.

Q: 6. Does this come with a bag or case?

A: No it does not include a case. In the Box: Microphone Madness MM-MSLM Omnidirectional MatchStick Lapel Microphone (Black) Windscreen Limited 1-Year Warranty Suggestion: Pelican 1010 Micro Case (Clear Yellow with Colored Lining) B&H # PE1010MCCY - https://bhpho.to/2FCYS0T

Q: 7. How long is the cable?

A: 6 foot long from mike to plug tip. Hope this helpsJack

Q: 8. would these work for a wireless system? for example, the new Rode Wireless Go system or Sennheiser XSW kits? do transmitters typically provide the plug in power needed for these lavs?

A: This will work with the Rode Go systems very well, I've used them together in the past and overall had a good experience. However it does not work with Sennheiser wireless system since they have a proprietary locking pin, so when buying lavs for Sennheiser systems it either needs to be made buy Sennheiser or for Sennheiser.

Q: 9. Does it work with wireless equipment? Sennheiser G3/Rodelink, etc?

A: This lavalier mic does have a 3,.5mm connection,.and it will work well with the Rode Wirelss Go system. But be aware that the Sennheiser systems as well as the Rodelink systems require a locking 3.5mm connection, so this mic may not make a secure connection and can easily pop out with those transmitters.

Q: 10. Can you use this with a MixPre 3 II recorder? Else is there another preferred wired lav?

A: It is not recommended to connect a lapel microphone directly to the 3.5mm Aux/Mic input on the Sound Devices MixPre-3 II. The Saramonic DK3A Premium Omnidirectional Lavalier Microphone could, however, be connected to the XLR inputs on the MixPre-3 II using an XLR adapter that converts phantom power such as the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (BH #ROVXLRP): https://bhpho.to/3JrNPql