The JG11-20A Power Distribution Center from Juice Goose is intended for use in 19-inch rackmount environments. It features 11 NEMA 5-15R outlets—10 on the back and 1 on the front. The front outlet is unswitched, as is one of the outlets on the back. All other outlets are rotated to better accommodate wall wart power supplies. The outlets draw power via the unit's 15-foot NEMA 5-20P power cord.

11 AC Outlets    20A Rating    Front-Mounted Circuit Breaker    Surge Protection    15' Power Cord

The JG11-20A provides 11 AC receptacles, including one unswitched outlet on the front and back of the unit. Excluding the unswitched outlets, the other receptacles are rotated to better accommodate wall wart power supplies. Each of the AC outlets is NEMA 5-15R-rated for 15 amps.

The JG11-20A has a 20A circuit breaker and an 18A maximum current rating.

The unit features AC power protection that includes a fast-acting metal oxide varistor, which guards against high-energy surges between the line and neutral power leads. This protection also includes filtration capacitance, which enhances the surge protection and adds a primary level of line-noise elimination.

The power cord is rated for 20A and features a NEMA 5-20P plug. It's 15' long.

The JG11-20A features a circuit breaker mounted on the front of the chassis and is rated for 20A.

Related Questions and Answers

Q: 1. is power monitoring at the socket level?

A: Yes, the load passing through the APC Metered Rack Power Distribution Unit (30A, 208V) can be monitored at the socket level.

Q: 2. Could these wheels be used to replace the cast wheels on a 127VS Manfrotto dolly or do they have proprietary connectors?

A: I have the manfrotto114 mv with the wheels that came with it and it does not look easy to do. The orbit dolly that they go on is awesome purchase that and you will love it.

Q: 3. What is the depth of the actual unit- dealing with a really shallow rack.

A: According to the manufacturer, the E-107USB Rack Mount Power Center measures 19" x 6" x 2" (L X W X H)

Q: 4. Does it lock when it pushed in, and pulled out?

A: No it does not lock but there is a slight snap or pop when the Adam Hall AH-87555 is all the way closed or pulled out.

Q: 5. Are the screws included with TP-Link Rackmount Kit-19?

A: Yes, mounting screws are included with the TP-Link 19" Switch 2-Piece Rack Mount Kit.

Q: 6. What is the maximum size of square tubing this clamp will accept. 1X1 inch? 1.25 X 1.25 inch?

A: These clamps accept a thickness of 1 x 1 inches.

Q: 7. Why was this removed from RED's list of Approved Accessories?

A: A reason has not been relayed why RED has removed the Tilta Advanced Power Distribution Module for RED KOMODO (Black) from the RED list of approved accessories.

Q: 8. What is FLA for this cable?

A: The Furman Locking Power Distribution Strip (120V/15A) BH #FUPLUGLOCK has a 15amp rated breaker.

Q: 9. Pardon my ignorance, but what are the USB ports for?

A: The USB ports are used to power devices that have a USB connection.

Q: 10. Is the tilta gold mount power pass through plate for the RS2 compatible with this or you have to buy a whole new gold mount plate? If you have to buy a new gold mount plate, which plate is compatible?

A: This specific model of the Tilta Advanced Power Distribution Module for RED KOMODO does not include a V-Mount or Gold mount plate. We recommend using this model which comes with the Gold Mount - https://bhpho.to/3t6VMdp