The brown Single Earset Mic for Select Azden Systems from Microphone Madness is an ultralow-profile, single-earloop microphone with high gain before feedback designed to deliver detail and clarity even in noisy spaces or near loudspeakers. The flexible earloop comfortably conforms to your ear and the boom can be precisely placed to deliver accurate sound. This mic is intended for voice reinforcement in theater plays, speeches, lectures, male and female vocals, and more.

Locking 3.5mm Male Connector    For Azden Wireless Systems    Miniature Low-Profile Single-Ear Design    Flexible Earloop    Sturdy Boom    Hypercardioid Polar Pattern    50 Hz to 15 kHz Frequency Response    High Gain Before Feedback    For Speech & Vocals    Windscreen & Holding Clip Included

Locking 3.5mm male connector for compatibility with the following Azden wireless systems: Older 41BT and 10BT

Related Questions and Answers

Q: 1. Dumb question, would this work if I plugged this into an average aux port?

A: Whether you are referencing an Aux In port or an Aux Out port it will not work because mic signal is much lowerl than line level signal like from a headphone output for example. Because of that, the ESM-1-MN would only be compatible with a microphone input.

Q: 2. Is this compatible with the SONY WRT-820A?

A: This microphone is not compatible with any Sony systems. Your Sony wireless system requires a mic with the SMC9-4P connector, such as the Sony ECM-44BC Omni-Directional Lavalier Condenser Microphone with 4-Pin Connector,B&H # SOECM44BC.

Q: 3. Could this be used with a Rode VXLR+ 3.5mm TRS female to XLR male adapter with phantom power converter to use it as a wired mic?

A: Yes, the Polsen ESM-1-35H Single-Sided Earset Microphone for Sennheiser Transmitters (B&H # POESM135H) can be used with the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) in order to connect it to a wired XLR microphone input. As another option, you could use the similar Polsen ESM-1-MN Single-Sided Earset Microphone for Recorders and Wireless Transmitters (B&H # POESM1MN) for connection to a standard 3.5mm TRS mic input with plug-in power. Either version of the earset mic can be used with the VXLR+ adapter for connection to an XLR mic input. The difference between the two models is that the version for Sennheiser transmitters has a locking 3.5mm connector and the version for recorders has a standard non-locking 3.5mm connector.

Q: 4. Do these mics produce two mono signals, meaning the left mic is the left channel and the other mic is on the right channel? Or are they mixed into stereo, both mics on the right and left channel? Thanks!

A: Each microphone is sent to a separate channel (left and right).

Q: 5. I have Sony's ECM-AW4 Wireless Microphone. Will this mic work with this system?

A: The ECM-AW4 does not seem to have a 3.5mm microphone input, which it would need in order to use our EX-503 lav mic. Consult your manual or contact Sony to be sure.

Q: 6. I see this is the 503L - what is the difference from the 503?

A: Pretty sure the 503L screws down onto the transmitter so it won't come unplugged, the 503 just plugs in but doesn't lock down.

Q: 7. Are the clips removable?

A: yes.

Q: 8. Can this mic work with 48v phantom power?

A: No, this mic requires plug-in power, which is 2 to 10 VDC.

Q: 9. Is the ear frame flexible? (Can the circular part be shaped, or will it snap?)

A: Yes. The single-sided earclip on the Polsen ESM-1-TA4 easily conforms to your ear and holds the mic in place for active applications such as fitness, mobile journalism, house of worship, and more.

Q: 10. Will this ear piece work with the Shure BLX1 J10 wireless transmitter?

A: Yes, The Polson ESM-A-TA4 will work with the Sony BLX transmitters,