Rigging is a method of building, supporting, and suspending a camera or lighting equipment in different ways on a movie set or in a photographic studio when conventional support does not accommodate the equipment. Therefore, the 16mm Rod Set from 9.Solutions aids in building this kind of support.

The 39" long rods connect together with the included rod connector which has the same 3/8"-16 thread diameter as the rods on each end. At the same time, the rod connector enables the rods to connect at a 90° angle. Moreover, the aluminum Rod Set is compatible with a variety of rigging accessories such as gags, clamps, and suction cups. Because of 3/8"-16 thread diameter, 9.5mm rods are capable of attaching to 16mm rod via the rod connector.

1-Set of 39" Long Rods    3/8"-16 Threads on Both Ends of the Rod    Includes One Rod Connector    Used for Rigging Lights and Cameras    Used with a Variety of Other Accessories    Manufactured from Aluminum    9.5mm Rod also Attach to 16mm Rod    Rods Able to Connect at a 90° Angle

Aluminum rods are 39" long

3/8"-16 threads on both ends of each rod

16mm rods can connect at a 90° angle via the rod connector

9.5mm rod can connect to a 16mm with a rod connector

Related Questions and Answers

Q: 1. What’s the length of the 3/8”-16 thread?

A: The female thread is 35mm. The male thread is 20mm.

Q: 2. Is this also for rod extension?

A: This product does not list threading within the rod to allow extension. SmallRig aluminum rods offer threading.

Q: 3. Do these rods have threading on the inside for extensions?

A: These rods are not threaded.

Q: 4. 1/4 to 1/4?

A: The 9.SOLUTIONS Reversal Adapter has 3/8"-16 and 1/4"-20 screws; it also has 3/8"-16 and 1/4"-20 threads.

Q: 5. Illustration shows a VESA mount adapter, is this included?

A: No, a VESA mount adapter is not included with the purchase of the 9.SOLUTIONS Tilt Adapter. (On the bottom of the pictured image, it states "Shown with Optional Equipment;" the adapter is an optional accessory). If you would like the VESA mount adapter, the 9.SOLUTIONS VESA Mount to 5/8" Receptacle (Large), B&H # 9S9XV1024, may be purchased separately.

Q: 6. Please advise which stud should be used for 5/8 socket to convert to 3/8 male for tripod?

A: The Manfrotto 119 Short (16mm) Adapter Spigot with 1/4"-20 & 3/8" Female Threads would the appropriate product to use with this clamp. https://bhpho.to/2SNX36z

Q: 7. Do these have two female end M12 threads on each side like the aluminium versions? So you can bridge two separate carbon fiber rods and make a longer one?

A: These are not threaded. You could look at the SHAPE 15mm Extension Rods (Pair, Black, 4") which have male and female threads on both ends. https://bhpho.to/3dDUU82

Q: 8. Ar these 15mm rods? Will these work with the Zacuto base plate?

A: Yes these are 15mm rods and the same length rods that come with the Zacuto VCT Universal baseplate.

Q: 9. are they threaded ?

A: No, these are not threaded.

Q: 10. What is the pin length? 3inch?

A: The length is 3.5".