The E-Image 5" Articulating Monitor Arm provides a short-length mounting solution, highly useful for compact rigs but also for larger ones when you prefer your monitor close at hand. The overall length when the arm is extended is 5" in total. Each end has a 1/4"-20 mounting post, allowing you to secure the arm to cages and various other rig components. Also included is a shoe mount to 1/4"-20 male adapter and a 1/4"-20 female-to-female converter. These attach to the arm to let you mount it directly onto your camera hot shoe. The arm features three points of articulation, which are all locked at the same time when you tighten the center wingnut.

Short-Length Arm with 3 lb Load Capacity    1/4"-20 Post on Each End    Shoe Mount Adapter Included

Related Questions and Answers

Q: 1. I have a 27 , 19.4lbs. monitor attach to this stand. No matter how much I tighten the retaining bolt, the monitor always sags downwards. How can I keep my monitor held upright with this system? Thanks.

A: I have the same exact issue with my 24 inch monitor that is attached to the right side. Left side is perfect but ride side sags down ever so slightly. I have accepted it as is. Very weird.

Q: 2. SmallRig Camera Cage Kit for Panasonic DMC-GH4 and GH3 Cameras How Can I attach this item to SmallRig Camera Cage Panasonic DMC-GH4 ?

A: The SmallRig Camera Cage for the Panasonic DMC-GH4 has many 1/4"-20 threads for you to screw in the SmallRig 7" Articulating Arm. There is a 1/4"-20 screw on each end of the arm.

Q: 3. I'm using the Pearstone 4.2 (10.7cm) Articulating Arm to mount a Tascam dr70 onto a Sony a7S Camera Rig ES-T16. I have mounted a video light and external monitor to the 2 shoe mounts. I don't see a way to mount the Tascam into one of the holes in the cage without having to turn the whole arm (rather than being able to tighten the knob to secure the male end of the screw into the hole). What am I missing? thanks!

A: You have it right. You have to turn the whole arm into the screw hole, tighten it, then adjust the arm using the large knob.

Q: 4. why is the no tightening lever on this picture.. it used to have a blue angled one?

A: There is a blue tightening lever as pictured in the product image: https://bhpho.to/3gLJT4F

Q: 5. Will the included monitor plate work with a Zacuto Z Finder EVF?

A: It is our opinion that yes, this will work with the Zacuto Z Finder EVF.

Q: 6. What is the distance between the central joint to one of the ends?

A: Wei, it is roughly 3.5 inches on both sides.

Q: 7. Can the ends be rotated?

A: Yes, when the SmallRig Articulating Arm is not locked the 1/4"-20 end can be rotated.

Q: 8. Does this work with Sony fs7

A: Yes.

Q: 9. Can the two outside arms be turned around so the monitors are placed in a 360 degree fashion? For a triangular table set-up.

A: Yes: This full-motion desk mount features 15 degree monitor tilt and 180 degree swivel capability at multiple points for fine-tuning monitor positioning. Number of Displays Supported 3, Side-by-Side

Q: 10. Will this work with two ASUS VE247H 23.6 Full HD 1920x1080 2ms HDMI DVI VGA Back-lit LED Monitors? I've never mounted a monitor before, and I see there is a plate, how do I know what it will fit?

A: Not all monitors are mountable . The ones that are have a clear noticeable 4 holes on the back of the monitor which are standard for any mount. The mount is screwed onto the back of the monitor via these 4 holes. Non-mountable monitors have a clean back with no holes and need to be used with a stand. This particular mount will attach to any mountable monitor. Your investigation should be whether or not these Asus monitors are indeed mountable . Hope this helps.