Single Din Head Unit

Jensen Transformers Iso-max Din-li - Single-channel Line-input Isolator (din Rail)

Product Code: ga45914
Availability: In Stock

$539.97 $842.35

Qty

0 reviews Write a review

Description
Reviews (0)

Ideal for use in performance venues, broadcast houses, and broad-scale AV installations, the Jensen Transformers Iso-Max DIN-LI is a passive, single-channel line-input isolator, which prevents and eliminates hum and buzz by isolating the input of the connected device. Designed to work with professional, balanced audio systems, it is also capable of attenuating electromagnetic interference (EMI) and radio frequency interference (RFI) problems. The unit is plug-and-play with no power required, and snaps into place onto a standard 35mm DIN rail, for easy installation in a NEMA electrical enclosure.

The DIN-LI features a high-performance Jensen transformer with internal Faraday shield, which eliminates ground loops and reduces common-mode noise by as much as 124 dB. The unit delivers a flat frequency-response from 5 Hz to 40 kHz, and can withstand signals in excess of +19 dB at 20 Hz, without discernible distortion.

Connections to and from the Jensen Transformers Iso-Max DIN-2LI are made via removable screw-down wire terminals. The module comes equipped with a gray, molded assembly made from UL94-VO flame-retardant Noryl.

Isolates Input of Connected Device For 35mm DIN Rail in NEMA Enclosure Jensen High-Performance Transformer Eliminates Hum & Buzz from Ground Loops Reduces Electromagnetic Interferences Frequency Response of 5 Hz to 40 kHz Low Distortion Down to 20 Hz Passive Design Requires No Power Made from UL94-VO Flame-Retardant Noryl

Parameters
Type	Passive line-input isolator
Channels	1
Format	For standard 35 mm DIN rail in National Electrical Manufacturers Association (NEMA) electrical enclosure
Connectors	Removable, screw-down wire terminals
Frequency Response	5 Hz to 40 kHz
Input Impedance	Zi, 1 kHz, +4 dBu, test circuit 1 Minimum: 13.0 kOhms Typical: 14.1 kOhms Maximum: 15.0 kOhms
Voltage Gain	1 kHz, +4 dBu, test circuit 1 Minimum: -3.2 dB Typical: -3.0 dB Maximum: -2.8 dB
Magnitude Response	20 Hz, +4 dBu, test circuit 1, ref 1 kHz, Rs = 600 Ohms Minimum: -0.15 dB Typical: -0.03 dB Maximum: ±0.0 dB 20 kHz, +4 dBu, test circuit 1, ref 1 kHz, Rs = 600 Ohms Minimum: -0.35 dB Typical: -0.20 dB Maximum: ±0.0 dB
Deviation from Linear Phase	20 Hz to 20 kHz, +4 dBu, test circuit 1, Rs = 600 Ohms Typical: +1.4 / -0° Maximum: ±2.0°
Distortion (THD)	1 kHz, +4 dBu, test circuit 1, Rs = 600 Ohms Typical: <0.001% 20 Hz, +4 dBu, test circuit 1, Rs = 600 Ohms Typical: 0.04% Maximum: 0.10%
Maximum Input Level	At 20 Hz, 1% THD, test circuit 1, Rs = 600 Ohms Minimum: +17 dBu Typical: +19 dBu
Common Mode Rejection Ratio	60 Hz, test circuit 2 Typical: 124 dB 3 kHz, test circuit 2 Minimum: 85 dB Typical: 95 dB 60 Hz, test circuit 3 Typical: 95 dB 3 kHz, test circuit 3 Typical: 85 dB (600 Ohms balanced source)
Output Impedance	Zo, 1 kHz, test circuit 1, Rs = 600 Ohms Typical: 3.2 kOhms
Optimal Cable Length	Output Typical: 3.3' / 1 m Maximum: 9.8' / 3 m
Turn Ratio	Minimum: 0.999:1 Typical: 1.000:1 Maximum: 1.001:1
Temperature Range	32 to 158°F / 0 to 70°C (Operation or storage)
Voltage Difference	Minimum: 250 V RMS (Primary or secondary to shield and case, 60 Hz, 1 minute test duration)
Construction	Gray, molded assembly made from UL94-VO flame-retardant Noryl
Dimensions	3.85 x 1.42 x 2.30" / 97.80 x 36.06 x 58.40 mm
Packaging Info
Package Weight	0.4 lb
Box Dimensions (LxWxH)	4.75 x 3.25 x 2.25"

Passive, single-channel line-input isolator for professional, balanced audio systems
Isolates the input of the connected device
Connects between the source and the input destination to eliminate hum and buzz caused by ground loops
Reduces electromagnetic interference (EMI) and radio frequency interference (RFI) problems
Snaps into place onto a standard 35 mm DIN rail for easy installation in a NEMA electrical enclosure
Jensen high-performance transformer with internal Faraday shield improves rejection of high-frequency buzz by a factor of 100 to 1000 (40 dB to 60 dB) over traditional transformers
Ruler-flat frequency-response from 5 Hz to 40 kHz
Handles signals in excess of +19 dB at 20 Hz, without discernible distortion
Rejects noise by as much as 124 dB
Connections to and from the module are made via removable screw-down wire terminals
Made from gray, molded assembly made from UL94-VO flame retardant Noryl
Plug-and-play, easy to use, no power required

Related Questions and Answers

Q: 1. Is there a way to split the Timecode from the Ultrasync to two outputs?

A: You can use a distribution amp like this: https://www.bhphotovideo.com/c/product/1281342-REG/aja_c10da_analog_video_1_x.html

Q: 2. Does it have to be used with a particular mount?

A: The DigitalFoto Solution Limited HULK-ISO Shock Vibration Isolator is a universal solution. However if you are attaching a DJI Gimbal like the RS3 Pro or RS2 to the shock mount you would need a gimbal base adapter BH #DIPDRS2 https://bhpho.to/3BtjbLM

Q: 3. Is the 2.5mm end type A or type B?

A: Information about the CME WIDI DIN-5 MIDI Cable's wiring has not been made available by the manufacturer. It is intended to be used with the CME WIDI Jack Wireless MIDI-Over-Bluetooth Adapter, which allows switching between Type A and Type B.

Q: 4. Hi I can use the cable to connect my iPhone X and my beosaound 2300 bang and olufsen

A: This cable is wired for MIDImusic data only and is not designed for or compatible with B&O devices.

Q: 5. Is there a way to see the 8 pin connector end? My insane audio tj 1002 deck has an 8 pin mini din connection out of the back for an iPod, but the supplied cord is for the old iPod 30 pin connector. I am looking for a 8 pin mini din cord that will fit the port on the back of my deck, with a lightning connector on the other end.

A: This cable is designed for IK Multimedia products. Unfortunately, this means this may not work with your situation here. Looking at the cable, this offers 7 pins. Check out an example of a product this will work with at the link below.a href= http://www.ikmultimedia.com/irigproduo/ target= _blank http://www.ikmultimedia.com/irigproduo//a

Q: 6. How long is this cable?

A: The AVer 8-Pin DIN to 9-Pin D-Sub RS-232 Connector Cable for PTZ310 and PTZ330 is 11" long.

Q: 7. How long is the cable?

A: About 25 long, not including the jacks on each end.

Q: 8. Does the this cord convert digital to analog?

A: Not quite. The IK Multimedia interface that this cable connects to, would do that work and then it would send that conversion, via lightning connector, into the compatible iOS device that you are using for recording.

Q: 9. will this work with a Canon C400?

A: Yes, the Tentacle Sync Tentacle to DIN 1.0/2.3 Cable is fully compatible with the Canon EOS C400 6K Full-Frame Digital Cinema Camera, which features 1x DIN 1.0/2.3 (Genlock, Return, Sync) connector and 1x DIN 1.0/2.3 (timecode) connector.

Q: 10. Could you provide the pinouts of the Mini-DIN to the lightning connector?

A: Unfortunately, this is not public information at this time. The Mini-DIN connector is designed for our Mini-DIN compatible products. We do not suggest using these for third party products as we cannot guarantee success. Please feel free to reach out to our team for more information here: https://www.ikmultimedia.com/contact-us/

There are no reviews for this product.