Neutrik opticalCON LITE QUAD Singlemode to Quad 4 ST fiber breakout cables by Camplex provide a semi-rugged alternative to opticalCON Advanced systems when the action calls for a compact, lightweight solution. The cable is designed to allow higher bend radius performance typically used in rack interconnects, camera cranes, steadicam rigs, truck bays and other similarly controlled environments. Best of all, It is fully compatible with standard opticalCON QUAD connections.
The QUAD delivers a ruggedized 4-channel fiber optic connection system for semi and permanent installation. Mated connections are waterproof acc. to IP65 safety standards and the reliable push-pull locking mechanism assures there is never an accidental disconnect. All connections are compatible with standard opticalCON QUAD NO4FDW-A chassis connectors.
ST Breakout ends are ideal for mating to truck, OB van and studio patch bays or for connection to IP networks and video extenders.

• 4-channel singlemode tactical patch cable
• Dust and waterproof according to IP65 in mated condition
• Bend insensitive fiber
• Rugged push-pull locking mechanism with rubber caps
• Lifetime 2500 mating cycles
• Easy to clean shutterless connectors
• Rugged cable retention utilizing aramid yarn strength member
• Extremely flexible and crush resistant
• Lightweight plastic housing

Related Questions and Answers

Q: 1. Does anyone else get a vibration which makes the footage very bad? using an osmo pocket the image is unusable. if I gently touch the unit while it's moving, it's a very noticeable vibration.

A: We're sorry to hear of the difficulty that you've experienced with the WIRAL Lite Cable Camera Motion System (B&H# WILITE). Yes, touching the unit on a cable may cause both bouncing (i.e. changes in height per the z axis) and also induce some sway/swing in the cable that can also cause instability. We would recommend utilizing only the remote control to move it. Also, it's a good idea to start recording well before there is going to be an event happening that you want on video so that any cable movement has diminished by the time the action starts. Making sure that the cable is set to the proper tightness is also essential. The manufacturer recommends adjusting the cable to give it no more than 88 lb. (40kg) of tension.

Q: 2. Would this be ok with the Videomic Go II on a boom arm and connecting to the Sony ZV-E10?

A: Yes. The RODE SC2 Right-Angle 3.5mm TRS Coiled Patch Cable is compatible for use with the RODE VideoMic GO II and the Sony ZV-E10 Mirrorless Camera, however, you may need a longer cable if the mic is mounted on a boompole. You will probably want to use it together with an extension cable such as the RODE VC1 3.5mm TRS Microphone Extension Cable for Cameras - 10' (B&H # ROVC1) or the Pearstone 3.5mm Stereo Male to Female Extension Cable - 25' (B&H # PEMMSB125B).

Q: 3. Can this cord be used to replace the one that came with the Rode VIDEOMIC GO?

A: Yes, that is correct.

Q: 4. How long is the battery expected to last in a 'normal use' situation? Could it capture a three hour football game?

A: The WIRAL Lite Cable Camera Motion System (B&H# WILITE) using a large Sony L-series compatible battery could potentially work for a long football game. If you will be using it a lot then you may want to change the battery at halftime to ensure it being able to achieve maximum speed throughout the game.

Q: 5. Can the CT-3204 camo tripod be purchased separately? I don't see it listed under tripod legs

A: The Sirui CT-3204 Professional Carbon Fiber Tripod (Camouflage, Flat/75mm Bowl), B&H # SICT3204 is the legs only option.

Q: 6. Does my phone need to be near the set up the entirety of the Timelapse? The app seems to disconnect and then the lapse stops. Really frustrating

A: The phone based app can not always maintain connection easily, so it is advised to use the wireless remote control when there is limited connection , when using the WIRAL Lite Cable Camera Motion System.

Q: 7. What is the diameter of the carbon fiber legs?

A: The Sirui CT-3204 Explorer Series Carbon Fiber Tripod has leg diameters of Ø22.2, 25.8, 29.4 & 33mm.

Q: 8. What is the "wind rating" on this product. Seems like it would become very unstable even with the lightest wind. How is it secured on the line to stop it from rolling over?

A: There is no wind rating for this product. However it is safe to say you would not want to use this system in windy settings.

Q: 9. Can this rig be "programmed" to go from A to B, then return to A, then travel to B over & over again on its own?

A: That should be possible. We have added the user manual to this product on our website. You can go over all the functions of this system through this manual. https://bit.ly/2FfDBKB

Q: 10. Can this be made to shoot straight down with a smart phone?

A: Yes it can. You would just need a Smart Phone Mount that will allow you to point the camera straight down like the Square Jellyfish Jelly Grip Tripod Mount for Smartphones. https://bhpho.to/3ahpNxC