Recreate the disco days of the late 1970s with the 16" Mirror Ball from Eliminator Lighting. Perfect for parties, this mirror disco ball incorporates a ring that connects to an external motor to rotate in continuous slow motion. Shine a light directly onto the ball to see a myriad of light spots spinning around on your dance floor.

Rotating Mirror Ball    Dramatic Dance Floor Light Effects    Ring for Connecting to External Motor    Hundreds of Reflective Mini Panels    Hanging Ring Included

Related Questions and Answers

Q: 1. Can each of the lighting instruments' color be controlled independently? How about brightness?

A: No, the color of the Eliminator Lighting Mini Par Bar Portable Par Can Lighting System's lights can be set independently, as color changes apply to the entire fixture. The Eliminator Lighting Mini Par Bar Portable Par Can Lighting System has a light range of around 25 feet, after which the intensity will fall off.

Q: 2. Does it have a port where I can play my own music through it or is it pre loaded with it's own christmas music?

A: This is a dimmer pack, and does not have any pre-loaded music. It does have a small microphone so that it can be sound activated, and by using the dip switches you can change the pattern.

Q: 3. Is there a way to mount this on a wall or to a light pole? The images don't really show this.

A: The one I got from B&H has a detachable A shaped mounting bracket with a hole for a c-clamp. I would not recommend wall mounting because it will heat up during use and could cause damage or fire. It is a good unit with easy settings. Paul C, Decatur GA

Q: 4. Can the LED be turned off if I do not want the LED on with the Bubbles?

A: No, the leds on the Eliminator Lighting Bubble Storm LED Machine and Fluid Kit (White) are always on. But there is a non led version, https://bhpho.to/3ozFwPK.

Q: 5. Can I use this Analog Lighting Controller System with the Odyssey PAR can lights, with LED bulbs?

A: The Eliminator Lighting SC8 II Pad System Analog Lighting Controller System is not designed for use with LED lights.

Q: 6. How do make it sound activated ?

A: Sound Active Pulse Mode: 1. Plug the fixture in and press the MENU button until “SOUF” is displayed. 2. Press the ENTER button to adjust the sound sensitivity. Use the UP and DOWN buttons to adjust the sensitivity. The sensitivity can be adjusted between “SF.00” (least sensitive) to “SF.12” (most sensitive). 3. After you have adjusted the sensitivity you can activate strobing by pressing the MENU button until “FLAS” is displayed and press

Q: 7. How many lumens at 100% ?

A: The manufacture does not have it rated in Lumens but in Lux and Candles. It is, 65 fc / 700 Lux at 6.56' / 2 m

Q: 8. Could one use these to control the output of AC powered Quasar LED tubes?

A: oh it would probably work then. It works by AC power dimming so it should be fine

Q: 9. How big is this motor?

A: I am totally going from memory because I had to return mine since it did not suit our needs... BUT, it is approximately 4 inches in diameter, and maybe 1 inch thick.

Q: 10. How loud is the light when running?

A: The fans on the Eliminator Lighting Mini PAR RGBW LED Light have been known to get a little noisy.