Neutrik opticalCON LITE QUAD Singlemode fiber reels by Camplex provide a semi-rugged alternative to opticalCON Advanced systems when the action calls for a compact, lightweight solution. The cable is designed to allow higher bend radius performance typically used in rack interconnects, camera cranes, steadicam rigs, truck bays and other similarly controlled environments. Best of all, It is fully compatible with standard opticalCON QUAD connections.
The QUAD delivers a ruggedized 4-channel fiber optic connection system for semi and permanent installation. Mated connections are waterproof acc. to IP65 safety standards and the reliable push-pull locking mechanism assures there is never an accidental disconnect. All connections are compatible with standard opticalCON QUAD NO4FDW-A chassis connectors.

• 4-channel singlemode tactical patch cable
• Rugged lightweight reel with brake lock
• Dust and waterproof according to ip65 in mated condition
• Bend insensitive fiber
• Rugged push-pull locking mechanism with rubber caps
• Lifetime 2500 mating cycles
• Easy to clean shutter less connectors
• Rugged cable retention utilizing aramid yarn strength member
• Extremely flexible and crush resistant
• Lightweight plastic housing

Related Questions and Answers

Q: 1. Does anyone know if this device will de-embed audio when using this as a SDI to HDMI converter? I know there are smaller/cheaper products that do this but I like the versatility of having a multiviewer as well.

A: Hi Andrew, This is Jules from product support at Symbiosis, Decimator's master distributor for your region. The DMON-Quad will pass embedded audio from any of the four inputs to both SDI and HDMI outputs. When in multi-viewer mode, you can select which input's audio is passed to the outputs. When viewing an input as full-screen the audio from that input is passed. It does not have a separate audio only output. I hope this helps but if you need more information please feel free to contact us on support@symbiosis.com. Kind regards Jules

Q: 2. What is the MuxLab part number for the DC Power Supply recommended for this? 12V DC brick when used without a POE network switch

A: MuxLab do not make a proprietary DC Power Supply for the MuxLab Dante/Quad Channel Audio PoE Gateway however, any 12VDC, 1A (amp) minimum power supply with positive polarity will provide sufficient power when using without a POE (PSE) Ethernet switch.

Q: 3. How are the dimensions listed - depth, width and height?

A: The dimensions on the Lowepro Trekker Lite BP 250 AW Backpack are listed as length, width and depth.

Q: 4. I need to input a 1080p59.94 and output 1080p30, Will this model do that? If not which will? Plus audio passthrough? Thanks!

A: Yes! But if you are only using one signal/camera, you should look at the MD-HX.

Q: 5. Does this work with Macbook Pro 2019 models? Also, is it compatible with OBS and/or Qlab software?

A: Yes, this card is compatible with Mac OS. However you will need a product like the Akitio Node Thunderbolt 3 External PCIe Box to use this product with a Macbook Pro, BH #AKNODET3IATU. It is compatible with OBS. https://bhpho.to/31aar7U

Q: 6. Can I output the camera shot(s) from the HDMI out (or SDI out) from the DECIMATOR DMON-QUAD to Zoom, via a Macbook Air with USB3 ports (with an HDMI to USB3 connector) or via a MacBook Pro M1 (with an HDMI to USB-C connector)? Or do I need some other device (like a Magewell USB Capture SDI Plus, One-Channel 2K Capture Device) to send the camera image(s) to zoom?

A: To have the HDMI or the 3G-SDI multiview output on the DECIMATOR DMON-QUAD 4-Channel 3G-SDI Multiviewer captured into a computer, one must use an HDMI or 3G-SDI to USB capture device. See capture device example below: https://bhpho.to/34DuVNB

Q: 7. Can I feed two video signals and get a half and half left to right screen display?

A: Hi James, This is Jules from Symbiosis, Decimator's Master Distributor for your territory. The DMON-QUAD allows you to create custom layouts that will let you resize and reposition the windows in a multi view. You can have any number of windows up to the number of inputs, in this case four. So it's straightforward to create a layout that puts two windows on screen next to each other centred vertically. The pictures will retain their aspect ratios so you will have some black space above and below the windows. I hope this helps. Jules

Q: 8. I have three 23.98 camera inputs, two at 1080P and one at 1080PsF, will I be able to scale and HDMI output at 1080P 60?

A: You might want to contact the manufacturer directly. This product has a lot of features and allows many different frame rates and resolutions to display all at once or individually on screen

Q: 9. Is this a one time fee? Would there be any annual renewal or maintenance charges required in addition to the price? Is this the fee for a school district or individual?

A: It is a one time cost with no additional fees. If you are buying for a school, please contact the B&H EDU department for pricing.

Q: 10. Does a Canon 5DMIV with 17x40L Lens fit in the Camera Compartment?

A: The Canon 5D IV with the 17-40mm lens attached will not fit in the camera compartment of the Lowepro Trekker Lite BP 250 AW Backpack.