Neutrik opticalCON LITE DUO Multimode fiber cables by Camplex provide a semi-rugged alternative to opticalCON Advanced systems when the action calls for a compact, lightweight solution. The cable is designed to allow higher bend radius performance typically used in rack interconnects, camera cranes, steadicam rigs, truck bays and other similarly controlled environments. Best of all, It is fully compatible with standard opticalCON DUO connections.
The DUO delivers a ruggedized 2-channel fiber optic connection system for semi and permanent installation. Mated connections are waterproof acc. to IP65 safety standards and the reliable push-pull locking mechanism assures there is never an accidental disconnect. All connections are compatible with standard opticalCON DUO chassis NO2-4FDW-A connectors.

• 2-channel multimode tactical patch cable
• Dust and waterproof according to IP65 in mated condition
• Bend optimized OM3 fiber
• Rugged push-pull locking mechanism with rubber caps
• Lifetime 2500 mating cycles
• Easy to clean shutterless connectors
• Rugged cable retention utilizing aramid yarn strength member
• Extremely flexible and crush resistant
• Lightweight plastic housing

Related Questions and Answers

Q: 1. Does this item do hotshoe-to-hotshoe triggering? I’d like to use it as a way to blank off the dedicated TTL contacts on a flash trigger.

A: Yes, this would do hotshoe to hotshoe triggering and block off TTL reading.

Q: 2. Can this be made to shoot straight down with a smart phone?

A: Yes it can. You would just need a Smart Phone Mount that will allow you to point the camera straight down like the Square Jellyfish Jelly Grip Tripod Mount for Smartphones. https://bhpho.to/3ahpNxC

Q: 3. Can this control 8 sequential DMX single address DMX fixtures for dimming only? In other words, faders 1-8 control DMX 1-8

A: If the fixtures only have only one channel-yes, the ikan Lite-Puter 8-Channel DMX Lighting Console can be used.

Q: 4. It says the pc syncs are OUTPUTS. does this mean I can't use a pc sync cable from an analogue TLR camera to fire a modern flash unit on the hotshoe?

A: That is correct.

Q: 5. Does anyone else get a vibration which makes the footage very bad? using an osmo pocket the image is unusable. if I gently touch the unit while it's moving, it's a very noticeable vibration.

A: We're sorry to hear of the difficulty that you've experienced with the WIRAL Lite Cable Camera Motion System (B&H# WILITE). Yes, touching the unit on a cable may cause both bouncing (i.e. changes in height per the z axis) and also induce some sway/swing in the cable that can also cause instability. We would recommend utilizing only the remote control to move it. Also, it's a good idea to start recording well before there is going to be an event happening that you want on video so that any cable movement has diminished by the time the action starts. Making sure that the cable is set to the proper tightness is also essential. The manufacturer recommends adjusting the cable to give it no more than 88 lb. (40kg) of tension.

Q: 6. Does it allow Phantom Power to go through?

A: Yes, as long as you do not wire any as a mult.

Q: 7. Can I use this to mount my old vivitar zoom thyristor 3500 flash unit on and connect it to the MIOPS sound trigger or NERO sound trigger?

A: Yes, this hot shoe will work.

Q: 8. Does it allow Phantom Power to gp through?

A: Hi Mike. As long as you are wired up properly these will pass phantom without issue. Note that the 1/4" is rarely if ever used for phantom- the XLR will work without issue. Thank you!

Q: 9. Can I use it on a Panasonic G7 to mount a Canon Speedlight over the adapter (to work in Manual mode)?I'm concerned because the adapter has not only (on top) a contact in the center to trigger the glash, but also a surrounding metal that would make short-circuit the contacts of the Canon Speedlight, and I don't know if that could damage my Speedlight..Thank you!

A: I am not familiar with Panasonic, but I use these in manual mode with Canon 580 speedlites connected to Pocket Wizard radio triggers. I have had no problems at all using the 580s with umbrellas on light stands.

Q: 10. Two female pc adapters, do you mean I can connect to not hot show flashes( like quantum tdr5 at the same time? I can only see a female and male pc ports on the image, is the other female pc port on the opisite side? Looking to connect a pc flash and a picketeizard using a pc cable. The sony a77 ii has no pc connectir only hot shoe, planing to buy one but I need a two PC adapter, may be this one work. Any help will be greatly appreciated

A: If one would like to use the Nisha Deluxe Mult-Purpose Hot Shoe, on the Sony A77 II, it is important to start out with a Sony/Minolta hot shoe to universal adapter: https://bhpho.to/2fzXH2k Then one can use the Nisha multi-purpose Hot Shoe the way described.