Best 5 Port Network Switch

Trendnet Tpe-082ws 10-port Gigabit Poe+ Managed Switch

Product Code: ga46346
Availability: In Stock

$419.97 $579.56

Qty

1 reviews Write a review

Description
Reviews (1)

With a 20 Gbps switching capacity and a variety of advanced management features, the TPE-082WS 10-Port Gigabit PoE+ Managed Switch from TRENDnet gives network admins complete control over their network. This switch comes equipped with 8 Gigabit ports and 2 SFP slots making it easy to connect a variety of network components directly to the switch. The switch can be easily installed into an existing rack and features a fanless metal housing.

This TRENDnet switch features a 75W PoE power budget and offers up to 30W of power per port to power devices such as access points, IP cameras, and other PoE compatible devices. Once installed, network admins can utilize features like 802.3ad link aggregation, asymmetric VLAN, 802.1Q VLAN, Voice VLAN, Loopback Detection, and much more to easily manage traffic throughout the network. Monitoring protocols including RMON, SNMP, SNMP Trap, and Port Mirroring also provide admins the ability to manage various aspects of the network. If that's not enough, access control features including ACL, SSL, MAC/port filtering, and a variety of additional protocols offer enhanced access control capabilities.

8 x Gigabit Ports 2 x SFP Slots 75W PoE Power Budget Web Management Interface Supports IPv6, LACP, VLAN, QoS, IGMP Per Port Bandwidth Control Private and Voice VLAN Support 20 Gbps Switching Capacity IEEE 802.1p QoS with Queue Scheduling Fanless Rack Mountable Metal Housing

Parameters
Standards	IEEE 802.1d IEEE 802.1p IEEE 802.1Q IEEE 802.1s IEEE 802.1w IEEE 802.1X IEEE 802.1ab IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3z IEEE 802.3ab IEEE 802.3ad IEEE 802.3af IEEE 802.3at IEEE 802.3az
Device Interface	8 x Gigabit PoE+ ports 2 x SFP slots LED indicators
Data Transfer Rate	Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit Ethernet: 2000 Mbps (full duplex)
Performance	Switch fabric: 20 Gbps RAM buffer: 512 KB MAC Address Table: 8 K entries Jumbo Frames: 10 KB HOL Blocking Prevention Forwarding Rate: 14.9 Mpps (64-byte packet size)
Management	HTTP/HTTPS (SSL v2/3 TLS) Web based GUI SNMP v1, v2c, v3 RMON v1 Static Unicast MAC Address Enable/disable 802.3az Power Saving LLDP and LLDP-MED Virtual Cable Diagnostics Test IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration
MIB	IP FORWARD TABLE MIB RFC 1354 RMON MIB RFC 1271 IPV4 MIB RFC 1213 IPV6 MIB RFC 2465 GVRP MIB IEEE 802.1Q-VLAN LA MIB IEEE 802.3ad LLDP MIB IEEE 802.1AB IGMP SNOOPING MIB RFC 2933 MLD SNOOPING MIB RFC 3019v PRIVATE VLAN MIB IEEE 802.1Q DHCPSNOOP MIB RFC 2026 QOS MIB RFC 4323 SNMP MIB RFC 3415 STP MIB RFC 4318 PNAC MIB IEEE 802.1x VLAN MIB IEEE 802.1q DNS MIB RFC 1611 ACL MIB BANDWIDTH CTRL MIB LBD MIB MIRROR MIB IPV6 NEIGHBOR MIB SNTP MIB STORM CTRL MIB STATISTICS MIB Tool MIB VOICE VLAN MIB DOS MIB
Spanning Tree	IEEE 802.1D STP (Spanning Tree protocol) IEEE 802.1w RSTP (Rapid Spanning Tree protocol) IEEE 802.1s MSTP (Multiple Spanning Tree protocol)
Link Aggregation	Static Link Aggregation 802.3ad Dynamic LACP
Quality of Service (QoS)	802.1p Class of Service (CoS) DSCP (Differentiated Services Code Point) Bandwidth Control per port Queue Scheduling: Strict Priority, Weighted Round Robin (WRR)
VLAN	Multiple management VLAN assignment Asymmetric VLAN 802.1Q Tagged VLAN Dynamic GVRP Up to 256 VLAN groups, ID Range 1-4094 Private VLAN (Protected Ports) Voice VLAN (10 user defined OUIs)
Multicast	IGMP Snooping v1, v2, v3 (per VLAN) Static Multicast Address Up to 256 multicast entries
Port Mirroring	RX, TX, or Both One to one
Encryption	802.1X Port-Based Network Access Control, RADIUS, TACACS+ Local Dial-In User Authentication DHCP Snooping (per VLAN) Loopback Detection Duplicated Address Detection Trusted Host Denial of Service (DoS)
ACL	ACL IPv4 L2-L4 & IPv6 MAC Address VLAN ID Ether Type (IPv4 only) IP Protocol 0-255 TCP/UDP Port 1-65535 802.1p DSCP (IPv4 only) IPv6 Address (IPv6 only)
Compatibility	Optional Software Utility: Windows 10, 8.1, 8, 7, Vista, XP, Windows 2003/2008 Server
Power	Input: 100 - 240 VAC, 50/60 Hz, internal power supply Consumption: 82 W (max.) Power Budget: 75 W
MTBF	862,966 hours
Temperature & Humidity	Operating Temperature 23 to 122°F / -5 to 50°C Operating Humidity Max. 95% non-condensing
Certifications	CE, FCC
Dimensions	11.00 x 5.00 x 1.74" / 280 x 180 x 44 mm
Weight	2.00 lb / 0.92 kg
Packaging Info
Package Weight	4.6 lb
Box Dimensions (LxWxH)	13.1 x 11.3 x 3"

Provides an easy-to-use web-based GUI management for reduced switch configuration complexity and offers a combination of SMB management features for easy deployment.

Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration.

A 75 W PoE power budget supplies up to eight Power over Ethernet devices.

Provides eight gigabit PoE+ ports, two SFP slots, a 20 Gbps switching capacity, a built-in power supply, and rackmount brackets.

Supplies up to 30 W of PoE+ power per port with a 75 W power budget.

This switch supports IPv6 configuration and IPv6 neighbor discovery.

A broad range of network configurations are supported by: 802.3ad link aggregation, Asymmetric

VLAN, 802.1Q VLAN, Voice VLAN, RSTP, MSTP, Loopback Detection, GVRP, 802.1p Class of Service

(CoS), port bandwidth management, and QoS queue scheduling.

A convenient cable diagnostic test and traffic statistics aid in network troubleshooting.

Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, and RADIUS are compatible with

layered access controls.

RMON, SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions.

Related Questions and Answers

Q: 1. Which version is this? v1.0R, v2.0R or v2.1R?

A: At the time it was v2.1R, now 2.5 years later it is v2.2R.

Q: 2. Does it have a DHCP server?

A: No, this Netgear GS308EP 8-Port Gigabit PoE+ Compliant Managed Switch does not have a DHCP server. A router is required to perform that task.

Q: 3. Is this product (Version v1.0R) or (Version v2.0R)? Version v1.0R has DC power input, but Version v2.0R has AC power input. TKS!

A: The TRENDnet TPE-117GI Gigabit PoE+ Injector (BH # TRTPE117GI) version v1.0R) has been discontinued. It has been replaced by the TPE-117GI (Version v2.0R) which is we are offering.

Q: 4. Does it support RADIUS?

A: No, the Netgear GS308EP 8-Port Gigabit PoE+ Compliant Managed Switch does not support RADIUS.

Q: 5. is this device TPE-TG240G a managed switch?

A: Dear Bulalo! Thanks for your interest in TRENDnet! Please note it’s not a managed switch. Hope this helps! If you have any more questions, you can always respond directly to this thread and someone will be happy to try and help answer any additional questions you may have! Have a great day! Adrian TRENDnet CS

Q: 6. Is it L2/L3 switch or just L2?

A: Yes, this Netgear GS308EP 8-Port Gigabit PoE+ Compliant Managed Switch is possible to work as L3. https://bit.ly/4aVmhYv

Q: 7. Is the fan always on ? And how loud is it ? Would one be OK working all day with this switch 5ft away ?

A: According to Netgear, the fan as DB rating of 28.8Db which is quite quiet.

Q: 8. Does the POE of this unit support devices (such as wireless access points) that require 48v POE? Or does it only supply 24v POE?

A: this will support 802.3at PoE+ which will give you 30w per port. total poe budget is 180w.It will support ip phone as well as wireless access points.

Q: 9. how does the switch get its data to distribute to devices?

A: You would plug your router/modem in to 1 of the 8 ports and up to 7 other devices in to the remaining ports.

Q: 10. I need a poe switch to transmit my nvr video feed to several locations. does this switch support hdmi over ethernet?

A: Yes, this Netgear GS308EP 8-Port Gigabit PoE+ Compliant Unmanaged Switch will support the HDMI. The setup usually is that the cameras will connect to the switch, the switch to the NVR, the NVR to HDMI splitter (per monitor), to HDMI over Ethernet extender, to each monitor.