This foldout, 3-Pocket Filter Pouch from Ruggard provides a secure and convenient transport and storage solution for up to three circular 77mm filters. Filters placed within this pouch are each held within one of three padded, nonabrasive pockets, and can be easily accessed by opening its touch-tab fastened closure.

The 3-Pocket Filter Pouch measures 4.5 x 17.5" when opened, and folds to a compact 4.5 x 4.5". It can be used to keep the filters placed within it protected, as well as organized inside a larger bag or case. This pouch's exterior is woven from ballistic nylon for durability as well as weather resistance.

Holds Three Filters up to 77mm Size    Hook-and-Loop Closure    Folds to a Portable Compact Size    Nonabrasive, Padded, Polyester Pockets    Strong and Durable Woven Nylon Exterior

• Accommodates up to three 77mm circular filters
• Soft, nonabrasive, polyester-lined interior
• Touch-tab fastened closure
• Measures 4.5 x 17.5" when opened, folds to a compact 4.5 x 4.5"

Related Questions and Answers

Q: 1. Can I stick a filter without a lid in this? Or can it get scratched?

A: Yes, you can. There are soft dividers on the inside separating the filters, so you can put them inside without a hard case.

Q: 2. How wide is the webbing that makes up the belt loop on the back? Would it slide through a MOLLE loop?

A: The belt loop is too wide for a Molle loop.

Q: 3. Circular filters ? Fit

A: Yes, most circular filters will fit in this case.

Q: 4. Will it fit a Z series filter holder?

A: The Ruggard 5-Pocket Filter Pouch is designed to hold filters up to 4 x 6" with 5 pockets for each filter, which would make for a tight fit for the Cokin Z-Pro Series Filter Holder (B&H # COFHZP). The filter holder can be attached behind the case with the Velcro strap. Alternatively, the Ruggard Protective EVA 10-Pocket Filter Case (Up to 4 x 6"), B&H # RUFCV3108B should allow for the filter holder and filters to fit. Then there is the Haida Case for M10-II Filter Holder (B&H # HAHD4708) that should work for the filter holder alone.

Q: 5. I have this 77mm filter - BH #GOVND77 - which is 77mm but the front piece of this variable ND filter is actually 82mm. Will this fit in this pouch at all?

A: Your filter will have a tight fit in this case.

Q: 6. Does the pouch slide on the backpack belt after its attached to the belt?

A: The Ruggard 4-Pocket Filter Pouch (Up to 86mm) has Touch-Tab Belt Loop. So it can slide once on a belt?

Q: 7. Does this bag hold the large Lee Filters 150x170. Confusing when filters are mm and pouch description is inches. I don't trust my conversion skills since I calculate a 150 x 170mm filter = 5.9.x 6.7 inches or a 4x6 in filter = 101 x 152. Based on this, the pouch would NOT handle the 150 series Lee Filters. Agree or disagree?

A: You are correct. It will handle filters up to 100mm wide (4 inches) and 152mm in length (6 inches). The Lee 150x170 filters are too big for this pouch.

Q: 8. Does this have a belt loop?

A: No it does not have belt loops. However it does fit nicely in pantes with cargo pockets.

Q: 9. Hello.Any differences between this and the Ruggard Three Pocket Filter Pouch ?https://a href= http://www.bhphotovideo.com/c/product/1324924-REG/ruggard_fpb_233b_3_pocket_filter_pouch_for.html target= _blank www.bhphotovideo.com/c/product/1324924-REG/ruggard_fpb_233b_3_pocket_filter_pouch_for.html/a

A: The only difference I can see is the price.

Q: 10. would it be possible to fit a graduated filter in this pouch?

A: As long as it's less than 86mm it will fit.