The 20" D-Tap to 4-Pin XLR Female Power Cable from Wooden Camera enables you to power your device using a long-lasting D-Tap battery or power source. This unregulated cable features a D-Tap connector on one end and a 4-pin XLR female connector on the other end.

For 4-Pin XLR Female    Powers Device from D-Tap Source    20" Cable    D-Tap to 4-Pin LEMO

4-pin XLR male device

Related Questions and Answers

Q: 1. Will this work with Sony A7s III?

A: Yes. The following dummy battery will work.

Q: 2. Will this work with an URSA Mini Pro?

A: Though this would connect to the camera, there is risk that an improper voltage may damage the camera, and we would not recommend this cable for powering the URSA Mini Pro. Tilta also states: "Before using confirm that your camera or device can handle the unregulated voltage from your power source." A response from Blackmagic Design recommended AVOIDING unregulated voltage sources: "...Unfortunately, we do not test with or recommend using a D-Tap to XLR cable to power the URSA Mini. If the power source is regulated, it might work, but I can not guarantee that it will. Also, if the external power source is unregulated, there is a chance that it could damage the camera..."

Q: 3. Does this cable rotate around the XLR end? Am looking for a cable that has the cord going vertically up the 'top' of the xlr end (pins being the 'bottom') if that makes sense- to power the YAGH on the GH4.

A: I believe you were looking for a cable like this model.http://www.bhphotovideo.com/c/product/341340-REG/Switronix_PT_XLR_PTXLR_28_Power_Tap_to.html

Q: 4. Will i be able to power my Ursa Mini 4.6k EF from my ronin-mx with this cable? I hear the ronin has enough power to supply to the ursa, but the cable connecting the two needs to be strong enough.

A: HELLO,The cable will power the ursa no problem.I think you might have a problem with the Ronin power I believe th d-tap from the Ronin is to power small things like a follow focus motor or a transmitter but a camera I am not to sure. good luck

Q: 5. Would this work with a C500 mkii?

A: Yes, this will work.

Q: 6. Can this cable work on bebob 2 dual charger which has 16.5V and 5A output ?

A: yes it can

Q: 7. Is this safe to use with the Sony FX3 camera? I understand it uses the same battery as A7sIII, but I wanted to be absolutely sure, as I wouldn't want to brick my FX3. Also, would it show any errors that it's using a 3rd party battery?

A: Yes, the Wooden Camera D-Tap to Sony a9 / a7R III Dummy Battery Power Cable is compatible with the Sony FX3. There is a built-in voltage regulator and reverse polarity protection.

Q: 8. Can this be used to power an Ursa Mini Pro 12k mounted on a Freefly Movi Pro gimbal?

A: Yes, the CAMVATE D-Tap to Right Angle 4-Pin XLR Power Cable (32") could be used with the MoVi Pro to output power to the Blackmagic Design URSA Mini Pro 12K.

Q: 9. Can this power a godox VL-200? there's a 4 pin XLR cable that goes from the controller box directly into the light. I am trying to replace that cable as mine is damaged.

A: Yes, the Watson PXLR44P-20 XLR 4-Pin Power Cable (20') will work as a replacement for your current four pin XLR cable.

Q: 10. How long is the actual cable on this unit? Or does the 9 measurement include the head and tail connectors?

A: Cable is 9 sans connector - but too short for me couldnt use.