Control your SDI Bridge RS Series Routing Matrix from a central location with the 3G/HD/SD-SDI Matrix Routing Switcher Remote Control Panel from DIGITAL FORECAST. This 1 RU rackmount control panel supports control of the RS series bridges including the RS1616, RS88, and RS84.

It allows you to control up to a 16 x 16 3G/HD/SD-SDI matrix using its 16 SDI inputs, 16 SDI outputs, and 32 corresponding front-panel buttons. It can be remotely controlled via RS-422 serial protocols that support remote control from up to 262' away.

Route 3G/HD/SD-SDI Video Signals    Works with RS1616, RS88 & RS84 Bridges    RS-422 Control Signaling Protocol    Supports up to 262' Control Distance    Buttons to Control up to 16 x 16 Matrix    1 RU Rackmount Design

Related Questions and Answers

Q: 1. Does anyone know if this reclocks the signal?

A: We're afraid not. This is passive, it will not re-clock the signal. For a re-clocked signal you would need to look at the Apantac 3G-SDI 1x4 Re-Clocking Distribution Amplifier, B&H # APDA4HD, instead. https://bhpho.to/2EkR1Ue

Q: 2. Does the unit switch upon sync loss or image loss? Is there a sensitivity setting if the latter?

A: This will switches to the secondary input when the primary input is lost. It does not specific sync or image, but in either case the signal will be lost and require going to the other input.

Q: 3. Is there an HDMI version of this?

A: The XD44L does not have an HDMI interface. There are a few ways we could do this. If you found, and I'm not sure they exist, a HDMI/SFP transceiver you could use our MSC-FS44FL. You could use the MSC-FS44FL with separate Transmit and Receive module, but that would reduce your effective capacity to a 2x2. http://www.matrixswitchcorp.com/products/MSC-FS44FL/ An MSC-XDM1000L would do what you need, but might be a little overkill. This is a modular unit and could be configured to any I/O that you might need. http://www.matrixswitchcorp.com/products/MSC-XDM1000L/ Thank you for considering Matrix Switch Corp. Let us know how we can help you further.

Q: 4. Dac -70 out put HDMI &SDI simultaneously?

A: Yes it can.

Q: 5. Does this unit handle audio at all?

A: Yes, if its embedded

Q: 6. Is the contact closure remote overide the automatic? Thanks

A: The Kramer 2x1:2 3G HD-SDI Automatic Standby Switcher has Contact closure or automatic switching.

Q: 7. Does the software suport saved switch configurations?

A: No, the software used with the AVMATRIX 8 x 8 3G-SDI Matrix Switcher (1 RU) does not list the saved switch.

Q: 8. Can presets be created so that common routes can easily be recalled?

A: Yes, this Matrix Switcher does allow you to store custom presets.

Q: 9. Does this support combining audio streams from multiple sources and outputting over a single output?

A: You are able to route audio signals from the HDMI inputs to the HDMI outputs on the Kramer 8x4 4K Matrix. However, it will not mix audio signals from several inputs to one output.

Q: 10. I need to confirm what is contained in the box. Does it contain a For.A MFR-4100 12G Router?, or only cables and the casing?

A: The items included with the For.A MFR-4100 are - In the Box For.A MFR-4100 12G-SDI Video Routing Switcher (7 RU) Power Cord Power Cord Clip Limited 1-Year Warranty