The white Universal Ceiling Mount from Huddlecam is a two-piece assembly that supports any PTZ camera with a 1/4"-20 mounting interface on the bottom. It attaches directly to the ceiling and the camera attaches to it upside down. The bottom piece is flat and therefore any size camera is supported. This mount can also be used to attach directly to U.S. single-gang device boxes, U.S. 4" square, round, or octagonal junction boxes, or European single-gang boxes (any with 60mm hole patterns). All necessary mounting hardware is included.

Mount Any Camera with 1/4"-20 Interface    Also Attaches to Gang and Junction Boxes    White Color, 2-Piece Sliding Bracket    Made of Heavy-Gauge Steel

All PTZOptics cameras

Universally compatible with any camera with a 1/4"-20 mounting interface on the bottom

Related Questions and Answers

Q: 1. Would this fit the Marshall CV730?

A: No it will not. The Marshall CV730 is too large

Q: 2. Would this be compatible with Panasonic AW-UE70 PTZ cameras?

A: I am not familiar with that Panasonic camera but it should work fine as long as the threaded insert in the bottom of the camera for mounting purposes is the standard 1/4 thread.

Q: 3. Is this will work with MH741?

A: Yes it will

Q: 4. Can I use this for PTZOptics 20x and 30x?

A: Yes you can use the HuddleCamHD with PTZOptics 20x and 30. The bracket will easily support the weight, it is rock solid, just follow the mounting instructions provided in the box.

Q: 5. Can the camera be mounted at 90 degrees?

A: I see no reason why it would not work. You will need to design mount for the PTZOptics Large Universal Rounded Nose Wall Mount to attach to so that the camera is positioned at 90 deg. The mount is designed to support wall mounting where the top of the camera is facing vertically up or down. If you want the camera top in a horizontal position you would need to design a wood block extension to attach the mount to.

Q: 6. What is the weigh restrictions with this model?

A: There is no weight restriction specifically listed for this mount. But it is designed to work with your smaller to average size PTZ Camera. It can safely handle a few pounds.

Q: 7. would this work with a Benq ik936st?

A: The BenQ CM00G3 Ceiling Mount for Most BenQ Projectors BH #BECM00G is compatible with the BenQ LK936ST 5100-Lumen 4K UHD Short-Throw Laser DLP Projector BH #BELK936ST.

Q: 8. Can this be used with the Sony SRG-360she?

A: This camera has slightly larger dimensions. The recommended bracket is BH #SOBRCWMZ330 (7.5 x 8.3 x 10.2"): https://www.bhphotovideo.com/c/product/704112-REG/Sony_BRCWMZ330_Wall_Mount_Bracket.html/specs

Q: 9. Is this the right mount for DS-2CD2383GO-I camera?

A: Yes, the ABM will work with the camera that you listed.

Q: 10. Does this come with screws to mount to the wall?

A: Yes, this comes with the appropriate screws.