Future proof your facilities for 12G-SDI cameras and equipment carrying up to a UHD 4K signal with this 225' 12G-SDI UHD 4K Single-Channel BNC Cable from Laird Digital Cinema. This SMPTE ST-2082-1 compliant cable features a Canare L-5.5CUHD miniature coaxial cable and BCP-D55UHD connectors with foamed PE insulation for optimal attenuation. Suitable for studio, broadcast, and outdoor installations, this cable features excellent return loss ratios that are compatible with 12G/6G/3G/HD-SDI systems.

Connect 12G-SDI Cameras and Equipment    75-Ohm BNC Connectors, Flame Retardant    SMPTE ST-2082-1 Compliant    Tinned Annealed Copper Braid    Highly Foamed PE Insulation

• Supports up to 12G-SDI 4K video
• Canare L-5.5CUHD miniature coaxial and BCP-D55UHD connectors
• Full SMPTE ST-2082-1 compliance

Related Questions and Answers

Q: 1. What latency in the video stream would this introduce?

A: Latency on NDI hardware, like the SCIENCE IMAGE NDI Bidirectional UHD 4K 12G-SDI/HDMI Encoder/Decoder, is going to entirely depend on how good your internet connection is and how good your end users (viewers) are also.

Q: 2. Is this item durable enough to be used in mobile live event applications?

A: The Belden 12G-SDI 75-Ohm UHD 4K Mini Coax Video Cable has an outer jacket of PVC (Polyvinyl Chloride) and 2 layers of outer shielding; Layer 1 being a Tri-Laminate tape and layer 2 being a braided Tinned Copper. There is also a 2.59 mm Polyethylene foam insulation surrounding the conductor. All of this should be durable enough to handle regular usage during live events as long as the cable is managed properly.

Q: 3. Is this a shielded power cable?

A: Yes it is shielded but this is not a power cable. It is an SDI cable used for transferring video/audio signals.

Q: 4. How flexible is this cable?

A: The following cables are very flexible. If you are looking for cables with more play we suggest the following. https://bit.ly/3OCU5hS

Q: 5. supports Edge blending?

A: The Barco PDS-4K UHD 4K HDMI and 12G-SDI Presentation Switcher does not support Edge Blending.

Q: 6. Is this a 3g cable?

A: This cable will function at short distances for 12G. Any cable will be backwards compatible for bandwidth. I.e a 12G cable will function at 6G or 3G or standard SDI.

Q: 7. I would like to know the specs on LEMO 5 pin connector attached to this cable.

A: Unfortunately no specs are available. please contact Laird directly at 800-898-0759 or a href= http://www.lairddigitalcinema.com/contact.asp target= _blank http://www.lairddigitalcinema.com/contact.asp/a

Q: 8. Does this cable lay well (mostly flat) on the floor (like a mic cable)?

A: Hi Isaac. This cable should lay very well on a floor. It is made with the flexible Belden 1694F, so it should be fairly easily manipulated to lay almost entirely flat across a floor without much effort. Thank you!

Q: 9. 1` long enough to reach the SDI port on the Komodo Camera, from a monitor mounted on top of a "top" handle?

A: 1' cables like the ShieldRock 12G-SDI BNC to BNC 4K UHD Cable (1') would likely be a little to short to work well in such a setup. A 1.5' cable or longer would be a better fit.

Q: 10. Is this a mini right angle bnc to right angle bnc? In the photo is appears to be two right angle bnc and not a mini bnc

A: Hi Gabriel. This assembly features (2) standard-size right-angle BNCs. The cable itself used in the assembly is a sub-miniature RG59 cable. Thank you!