The POWERANGE PR-PL-6680A Compact Portable Quad Charger with Simultaneous 28 or 16.8 VDC Output for Gold Mount and POWERANGE AN Batteries is a small, yet extremely versatile charger unit. Not only can it charge four batteries simultaneously, it can also output either 12 to 16.8 VDC and 28 VDC at the same time it is charging your batteries. This allows you to charge your batteries while at the same time, powering your camera.

When not connected to an AC power source your batteries can be used to feed the two discrete XLR outputs on the unit. For supplying 12 to 16.8 VDC, this enables you to hot swap batteries while the power remains uninterrupted. However, for the unit to supply 28 VDC when not plugged into AC power, you must have four 14.8 V (nominal) batteries attached to the unit. The charger features support feet that help prevent it from tipping over. It includes an AC power cable, but you must source the XLR cable yourself.

Simultaneous Charge and Output DC    Outputs 28 or 12 to 16.8 VDC    Simultaneously Charge 4 x Batteries    4-Pin XLR DC Power Output    3-Pin XLR Power Distribution    Includes AC Power Cable

Supports four Gold mount lithium-ion batteries

28 VDC uses the built-in 3-pin XLR DC power output
12 to 16.8 VDC uses the built-in 4-pin XLR DC power output

Simultaneously charge and output power via either XLR connector

The unit can output 12 to 16.8 VDC from even a single attached battery when not connected to an AC power source. However, it requires four attached and charged batteries for the unit to output 28 VDC when not connected to an AC power source. When connected to an AC power source the unit can charge up to four batteries and provide DC output at the same time

100-240 VAC power input

Built-in carry handle

Built-in support/anti-tip feet

Related Questions and Answers

Q: 1. What does Volt Bridge Enabled do if one was to choose this option?

A: The VoltBridge version of the Core SWX Fleet Micro 3A Digital Quad Charger for Gold Mount Batteries allows for wireless battery management through a mobile device app, providing remote battery status as well as the ability to put mounted batteries into SafeFly mode.

Q: 2. Can this charge Anton Bauer Digital 90 batteries?

A: While this charger works with most Gold Mount batteries, Anton Bauer batteries tend to require an Anton Bauer Charger. We do not recommend this charger the Digital 90, instead you will want to look at B&H # ANPERFDUAL. https://bhpho.to/2rQszp1

Q: 3. Can the charger provide XLR power while charging from AC?

A: While drawing AC power, the Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries (B&H# COFLEETQM4S) can either charge the batteries or provide power through the 4-pin XLR output. You can select your preferred option of those two using the selector switch on the back of the unit. Those two alternatives cannot both be used at the same time.

Q: 4. Hi there! Can I charge TITON 150 batteries? Thank you!

A: It may not. For Anton Bauer Titon 150 Gold Mount Lithium-Ion Battery you will want to stick with Anton Bauer chargers only. https://bhpho.to/2JOAadA

Q: 5. Will this fit two of the newly released Core G3 150 batteries and charge them? Thx

A: Yes, the Core SWX Fleet Micro 3A Digital Dual Charger for Gold Mount Batteries is compatible with the Core SWX Hypercore G3 150G 144Wh Lithium-Ion Battery (Gold Mount).

Q: 6. Which mount does the Amaran 100 use? V or gold?

A: The following unit is gold mount "Only"

Q: 7. will this work with IDX System Technology Imicro-98 14.5V 97Wh Li-Ion V-Mount Battery?

A: Yes it will.

Q: 8. Is this charger compatible with these batteries? Anton Bauer Logic Series Dionic 160 Digital Interactive Lithium-Ion Battery, 14.4 volts, 160 watt hours, Anton Bauer 3-Stud Gold Mount

A: Yes, it will charge all Dionic model, as well as Hytrons (NiMH) and the new AntonBauer offerings (Digital and Cine series).

Q: 9. Does this come with the cables, it shows in the pictures, but not in the "in the box" section?

A: The Aputure 2-Bay Battery Power Station (Gold Mount) comes with, two power cables. 1. 3 pin male to 5 pin male 2. 5 pin male to female XLR

Q: 10. Can this charger charge batteries while it is powering a camera through the xld output or can it only do one of those two functions at a time? Thx

A: According to PAGlink, Operation: The camera power supply function is operated by pressing and holding the Camera PSU button on the chargers front panel for 1 second. Charging is suspended whilst the power supply is in use.