The Nomad Transformer Scene Light from Foxfury deploys quickly with no need for a generator and cables, providing up to 14,000 lumens in spotlight, floodlight or 360° scene-light configurations. Runtimes range from three hours on high power to 24 hours on the 2000-lumen low setting.

The Nomad Transformer consists of a light head, a power pack and a telescoping tripod that extends to 12.5' high. It is designed to be set up in 60 seconds and weighs a total of 65 pounds. The light head can be used as a 12° spotlight, a 120° floodlight or a 360° scene light. The power pack will run the light head at full power for 3 hours, at the 5500-lumen medium setting for 4 hours, or at the 2000-lumen low power setting for 24 hours. The light can also run on AC power.

A remote key fob can be used to turn the light on and cycle through its settings. The base of the cylindrical power pack has a stabilizing foot and the three legs of the Tripo-Scope tripod have anchor points, to stabilize the erected light. A leash attaches to the light head and the Tripo-Scope post for extra security in windy conditions. The light head can be used atop the power pack, without the Tripo-Scope, in tight situations.

2000/5500/14000 Lumens    Spotlight/Floodlight/360° Light    Maximum Height 12.5'    Rechargeable or AC-Powered    Designed to Deploy in 60 Seconds    Up to 24 Hours Runtime    Portable at 65 lb    Remote Activation    Battery Power Indicator    Head Swivels 240°, Tilts Up & Down

• High: 14,000 lumens

• Medium: 5500 lumens

• Low: 2000 lumens

• Runtimes: 3 hours / 9 hours / 24 hours

• Beam angles: 12° / 120° / 360°

• Push-button at base of power pack

• Remote fob

• Designed to be deployed in 60 seconds

• Portable at 65 pounds

• Maximum height 12.5'

• Light head swivels 340°, tilts up & down

• Light head can be used with power back as base (without Tripo-Scope tripod)

• Rechargeable or AC power

Related Questions and Answers

Q: 1. What protection does it offer? And measurements

A: It's a tactical flashlight so it doesn't protect anything. It's made to be attached to the shield as in the product shot. But it can be clamped on to anything where illumination is needed in an adversarial situation. The measurements are below.LightLength: 5.5 (14.0 cm)Head Diameter: 1.3 (3.2 cm)Body Diameter: 1.1 (2.8 cm)Clamp2.9 x 1.8 x 1.5 (7.4 x 4.6 x 3.8 mm)

Q: 2. carging port is C or old style micro usb?

A: The charging cable for the FoxFury Rugo RC Light for Drones and Cameras is a Micro USB to USB-A cable.

Q: 3. How many different fixtures can it manage?

A: The American DJ Scene Setter 24-Channel Dimmer Board (B&H# AMSS24DIMBD) has 24 channels. As such, it can change 24 different types of settings. You can divide those up as you please among as many fixtures as you like as long as no two fixtures have settings set to the same number if you want each fixture controlled separately. Or you can deliberately have two (or more) different fixtures share the same channels to control them together as a group. For example, 24 separate fixtures using one channel each could be dimmed separately as that would require one function per light (24 fixtures x 1 function = 24 channels). Or 12 fixtures using two channels each could be both dimmed and the second feature (e.g. the speed of a strobe effect if your fixtures have a strobe option) could be adjusted (12 fixtures x 2 functions = 24 channels). Each additional function requires one extra channel per fixture. If there are three functions on each fixture then you can control all such functions on eight fixtures separately (8 fixtures x 3 functions = 24 channels). Any multiplicative combination of fixtures and functions that equals no more than 24 will mean that you can control each function of each fixture separately. (Make sure, however, that fixtures do not unintentionally share two channels. So, if one fixture uses four channels then if it’s set to, say, channel 10, then it’ll take up channels 10, 11, 12, and 14.) In a typical setup, one does not need to control every fixture separately. Rather, two or more fixtures are most often set to the same channel and thus controlled as a group. In such a case, let's say we have several one channel fixtures with only a dimming function (no strobe, etc.) set to channel 12. When we move the slider for channel 12 on the controller then those fixtures will be dimmed as a group at the same time. The same would be true of any other functions that those fixtures may have if they possess additional features such as color, strobe, movement, effect, gobo, and so on.

Q: 4. Does it have a 2.5mm barrel plug?

A: Yes the GOAL ZERO Nomad 20 Solar Panel has a 2.5mm plug.

Q: 5. What about AAA batteries??

A: The GOAL ZERO Guide 12 Power Pack and Nomad 5 Solar Panel Kit BH #GOG12SKN5 • MFR #44260 comes with 4 x NiMH Rechargeable AA Batteries. It also includes an Adapter Tray for AAA Batteries. You would have to supply (3) NiMH Rechargeable AAA Batteries

Q: 6. Does AVID Sibelius Ultimate work with windows 10 ?

A: Yes, Avid Sibelius Ultimate is compatible with Windows 10.

Q: 7. How does the foxfury rugo2 light for drone attache to a AUTEL evo2 pro?

A: The FoxFury Rugo RC Light for Drones and Cameras (B&H# FORUGO2) attaches to the Autel Robotics EVO II PRO Enterprise 6K Drone (Dual-Band) (B&H# AUE2PEDB) using the FoxFury Autel EXOLANDER Spotlight System for EVO II (B&H# FO7003ARII) and the FoxFury EXOLANDER Rugo Mount for Autel EVO II and DJI Mavic 2 Pro/Enterprise (B&H# FO85049).

Q: 8. What material is this frame made of?

A: The FoxFury EXOLANDER D3060-TC Light System for DJI Mavic 3 is constructed of a fire-and impact-resistant polycarbonate material.

Q: 9. Does this one have the double magnet closure like the black and white ones have?

A: Yes it does. This uses a magnet system to keep the clapper closed and tight.

Q: 10. Will this battery fit onto a Paul Buff Vagabond Lithium Extreme?

A: no it will not