Designed for use SWAT, special operations and other tactical response personnel, the Taker B30 Ballistic Cree-LED Shield Light from FoxFury installs on most shields with no tools and provides 600 lumens of white light in momentary, continuous-on and strobe modes. This light is powered by either three or six CR123 batteries; using three decreases runtime but not output. Runtime with six cells is 5 hours for momentary or continuous-on, and 8 hours for flash. A separate kill switch prevents accidental activation.

The light is operated by a single pressure switch — press and hold for momentary on, click twice for on and click three times for the strobe. The battery pack is connected to the switch and to the LED head on the front of the shield by braided steel cables with nylon connectors. The B30's anodized aluminum housing and replaceable polycarbonate lens cover are design to withstand harsh conditions; it is submersible to 32', impact-resistant to 9.8' and meets NFPA fire-resistance standards.

600 Lumens    On/Off, Momentary & Strobe Modes    5-Hour Continuous-On Runtime    8-Hour Strobe Runtime    Low-Profile, Retrofit Installation    Kill Switch    Braided Steel Cable    Runs on 3 or 6 CR123 Batteries

• 600-lumen white Cree LED

• Momentary-on, continuous-on, & strobe modes

• Runs on three or six CR123 batteries

• Runtime with six batteries: 5 hours momentary & continuous, 8 hours flash

• Remote pressure switch cable-connected to battery pack

• Switch placement at user's discretion

• Press & hold for momentary, click twice for continuous, click three times for strobe

• Separate kill switch prevents accidental activation

• Attaches to most shields with 3M industrial hook & loop fastener

• Braided steel cables from battery pack to light head & remote switch

• Submersible to 32', impact-resistant to 9.8', NFPA fire-resistant

• Aluminum housing, replaceable polycarbonate lens

Related Questions and Answers

Q: 1. Will this charge using a standard USB C to USB C quick charge cable like is used to charge modern drones and cell phones?

A: Yes. A standard USB-C and USB-C quick charge cable can be used for the FoxFury D3060 Trade Compliant Drone Light.

Q: 2. The olive version has different interior dimensions in the specs than the other colors - which are accurate?

A: I have an older (25 years older) version and the interiors seem very close in size. I have not put a tape to it, but they look the same.

Q: 3. How weather resistant is this bag?

A: is manufactured from cotton canvas that is naturally water-resistant, but which is a 'breathable" fabric so the air in the case stays dry even in humid environments. However, the manufacturer does not list a specific weather rating or IP rating for the case. It should be okay for use in light or moderate rain or snow and in humid conditions.

Q: 4. Is the build/design of the 600 so different from the 300 that this is not compatible with the 300?

A: The Aputure Rain Shield for Nova P600c LED Panel will not fit properly on the P300 to project it from rain.

Q: 5. Does this bag come packed flat to be accomodated in a suitcase?

A: When I travel i put my gear in an airline size hard case with wheels. I pack my Domke bag in my luggage but stuff it with underwear and toiletries. No need to flatten it.

Q: 6. What material is this frame made of?

A: The FoxFury EXOLANDER D3060-TC Light System for DJI Mavic 3 is constructed of a fire-and impact-resistant polycarbonate material.

Q: 7. How is the strobe mode triggered?

A: The FoxFury Rugo 2, 3-Point Lighting Kit only offers a strobe mode for drone search and rescue which is FAA compliant 107.29.

Q: 8. How does the foxfury rugo2 light for drone attache to a AUTEL evo2 pro?

A: The FoxFury Rugo RC Light for Drones and Cameras (B&H# FORUGO2) attaches to the Autel Robotics EVO II PRO Enterprise 6K Drone (Dual-Band) (B&H# AUE2PEDB) using the FoxFury Autel EXOLANDER Spotlight System for EVO II (B&H# FO7003ARII) and the FoxFury EXOLANDER Rugo Mount for Autel EVO II and DJI Mavic 2 Pro/Enterprise (B&H# FO85049).

Q: 9. Lowepro roll aboard

A: this is a shoulder bag , and carry on

Q: 10. What protection does it offer? And measurements

A: It's a tactical flashlight so it doesn't protect anything. It's made to be attached to the shield as in the product shot. But it can be clamped on to anything where illumination is needed in an adversarial situation. The measurements are below.LightLength: 5.5 (14.0 cm)Head Diameter: 1.3 (3.2 cm)Body Diameter: 1.1 (2.8 cm)Clamp2.9 x 1.8 x 1.5 (7.4 x 4.6 x 3.8 mm)