The SBC450US 4-Bay Networked Charging Station with Power Supply from Shure allows up to 4 ULXD6 or ULXD8 transmitters, equipped with the SB900A rechargeable battery, to be charged quickly and conveniently. The transmitters slide into the charger and the bi-color LEDs confirm the charging status. It is not necessary to remove the SB900A battery.

In addition, when connected to a network, the charging status of each transmitter can be viewed remotely. Transmitter settings or firmware can be updated while the transmitters are in the charger using Shure's Wireless Workbench or SystemOn software, or through a third-party room control system.

For ULXD6 and ULXD8 Transmitters    Bi-Color LEDs Confirm Charging Status    Remote Status Viewing on Network    Updates Using Workbench Software    Includes Power Supply

Compatible with ULXD6 and ULXD8 transmitters using Shure rechargeable batteries.

Easily adjust transmitter settings using Shure's control software such as Wireless Workbench and external control systems such as AMX or Crestron.

Monitor rechargeable battery information such as health, temperature, charge, and cycle using control software.

Update transmitter and charger software using Shure's Update Utility.

Related Questions and Answers

Q: 1. Will the Watson Pro 14.4V 158Wh Slim Li-Ion Battery (V-Mount) work with the Aputure 2-Bay battery power?

A: Yes, the Watson Pro 14.4V 158Wh Slim Li-Ion Battery (V-Mount) is compatible with the Aputure 2-Bay Battery Power Station (V-Mount).

Q: 2. What batteries work? Do you need a specific voltage on the batteries for it to work with this power station?

A: Any V-mount battery, the output depends on which Led it's being used on.

Q: 3. What battery should be used with this power station and a Amaran 300c?

A: To use the Aputure 2-Bay Battery Power Station (V-Mount) to power an amaran 300c RGB LED Monolight, you can use any of the batteries listed under Accessories on the Aputure power station product page.

Q: 4. will this work with the 120DII?

A: This is specifically for the Lightstorm 600d.

Q: 5. How is it supposed to power a 600D unit if it only output 480W? 600D needs 700+W...

A: This uses 2 V-Batteries with a total maximum of 720 watts combined in the 2 batteries

Q: 6. can you charge Sennheiser ew 100 G3 Microphone directly into charger without removing battery pack?

A: According to Sennheiser, yes you can. Directly from Sennheiser: The L 2015 quick-charging unit automatically recharges two Sennheiser BA 2015 batteries. The batteries are either inserted directly into the charger or remain in their bodypack transmitters/receivers of the evolution wireless G3 100, 300 and 500 Series, 2000 Series, Tourguide SK 2020-D and EK 1039.

Q: 7. charging error/blinking red lights?

A: Mike adapter doesn't seat properly. It is a continuous problem unfortunately. I'm not impressed with the system.

Q: 8. Can I connect this to a mixing board with an Ethernet to male xlr adapter?

A: I am afraid not: Power Requirement 15 V DC @ 3.3 A maximum, supplied by external power supply (tip positive)

Q: 9. Do you need two batteries to make it work? Or will one be fine?

A: This unit requires two batteries.

Q: 10. It is clear that the gooseneck base for this system takes two charging slots to recharge. Can I still configure the transmission and reception of 8 gooseneck mics with the 8 slots unit?

A: Yes the goose neck mic takes two slots to charge. You can configure the 8 mics with the one charging base.