The black Shure ULXD6/C is a digital tabletop transmitter equipped with a cardioid boundary mic and compatible with ULX-D receivers. The cardioid polar pattern focuses audio capture in front of the mic and rejects much of the off-axis ambient noise, great for picking up one speaker or allowing two panelists sitting next to each other at a large table to share a single mic. The unit's low profile is ideal for applications such as video-conferencing where minimum visibility is required. A smart choice for situations where wired mics are impractical, this tabletop transmitter enables quick setup and tear down, and can be put away in a docking station (available separately) for storing and charging when the mic is not in use..

With rugged, yet lightweight plastic housing, the ULXD6/C transmitter delivers pristine 24-bit/48 kHz audio quality and RF performance over its entire 330' range. It offers AES 256-bit encryption for secure transmission and advanced rechargeability options, making it suitable for use in large meetings at conference and convention centers.

For ULX-D Digital Wireless Systems    Built-In Cardioid Boundary Mic    0.25/10/20mW RF Output Power    Configurable Mute Button with Status LED    High-Pass Filter Reduces Noise    Secure AES-256 Encryption    Networked Intelligent Charging    9 Hr with SB900A Rechargeable Battery

• The mute button that can be configured for momentary or push-on/push-off operation, with a bicolor LED indicating the mute status.
• The unit quickly syncs with a wireless receiver via infrared at the touch of a button.
• The high-pass filter reduces low-frequency noise caused by table vibration or air-conditioning systems.
• A power lockout function disables the power switch and prevents accidental changes during events.
• 0.25/10/20mW selectable RF output power allows you to increase either the transmitter's range or the number of mics operating simultaneously.
• Low latency makes the ULXD6 ideal for meetings that require live sound reinforcement.
• The transmitter is compatible with the full line of Shure's antenna-distribution components.

• The unit operates for up to 8 hours and 40 minutes on two AA batteries.
• An optional Shure SB900A lithium-ion rechargeable battery pack offers intelligent power management with over 9 hours of battery life, precision metering in hours and minutes, and zero memory effect.
• A USB port allows for docked battery charging with the SBC450 (4-bay) and SBC850 (8-bay) networked charging stations (available separately).
• The charging stations enable remote power monitoring via Shure's Wireless Workbench software.

Related Questions and Answers

Q: 1. Can multiple simultaneous receivers be tuned to same transmitter channel to use for multi-people monitoring?

A: The system will determine what channel will be selected on receivers with the sync feature , becuase if you have too many receivers ijn the same channel you will get interference. or you can manually select the channel.

Q: 2. Hi friends, before ordering the Transmisor GXLIEM4,I would like to know if I can connect it directly to notebook to transmit through zoom app 4 speakers, or is it necessary to pass through an audio table? BR, Abraham

A: You could come directly from a headphone into the transmitter with a 3.5mm to 1/4" cablle. You would need to send a mono signal out of the headphones. This unit however is made to transmit to headsets, not speakers.

Q: 3. Will this work with a soundcraft ui16? We have 4 aux sends (xlr) and want to have 4 independent channels that can each have its own mix.

A: Yes, the CAD GXLIEM4 Quad-Mix In-Ear Wireless Monitoring System will work well in a scenario where four independent auxiliary mixes are needed for in-ear monitoring. The auxiliary outputs of the Soundcraft Ui16 16-Input Remote-Controlled Digital Mixer would pair directly with the four inputs on the CAD GXLIEM4.

Q: 4. What is the transmission distance from transmitter to receiver?

A: The transmission distance for the VocoPro IEM-Digital In-Ear Monitoring System is approximately 100 feet line of sight.

Q: 5. Nice to meet you.I want use Shure AD3 in. Japan.So I need AD3-JB.do you sell the one ? best regards,

A: We only sell SHURE USA items and components. Please contact Shire Japan for AD3-JB.

Q: 6. How does battery charging work here?

A: The CAD GXLIEM2 Dual-Mix In-Ear Wireless Monitoring System uses AC power for the tranmitter, and the included CAD GXLIEMBP Bodypack Receiver uses two AA batteries for powering. AA batteries, if rechargeable, should have their own proprietary charger.

Q: 7. The product specs say the reciever takes AA batteries, but in my experience they have a built-in rechargeable lithium. What's the truth here?

A: The receivers in the VocoPro IEM-Digital Wireless Stereo In-Ear Monitoring System are powered with rechargeable 3.7V AA batteries. The batteries can be recharged while within the receiver via the USB charging connection at the bottom of the battery compartment.

Q: 8. I'm looking for this system for trumpet. Will this mic handle that application??

A: The AMT Quantam7 wireless receiver and transmitter are compatible, but the microphone included in this system is intended for use with a saxophone. A better option would be the AMT Q7-P800BM bell-mounted system (B&H # AMQ7P800BM) or Q7-P800 off-the-bell system (B&H # AMQ7P800) which both include microphones that intended for use with trumpet.

Q: 9. Are the inputs stereo TRS? Do the receivers receive and output audio in stereo?

A: No, the CAD GXLIEM4 Quad-Mix In-Ear Wireless Monitoring System provides mono audio input and output. The inputs on the transmitter base are 1/4" TS and the receivers have a 3.5mm TRS headphone output connection for dual mono audio so you will hear the same audio through both ears.

Q: 10. What are the specs on the transmitter power supply?

A: Detailed information on the specs of the CAD GXLIEM4 Quad-Mix In-Ear Wireless Monitoring System's power supply has not been provided by the manufacturer.