The RF Venue 4 Zone is an antenna combiner for wireless microphones receivers, which combines up to four separate pairs of diversity antenna connections. Designed to take the complexity out of multi-zone signal management, it is ideal for use in multi-purpose rooms, indoor-outdoor configurations or main stages with secondary breakout rooms.

The unit operates in the 470 to 960 MHz frequency range and is compatible across all brands. It allows for fine-tuning of RF levels in each coverage area by offering RF signal attenuation control for each channel, down to -31 dB in 1 dB steps. For roaming microphone transmitters, selectable On/Off inputs let you choose which coverage zones are active, saving setup and breakdown time when working on location. Additionally, the RF Venue 4 Zone can provide 12 VDC power to active antennas or in-line amplifiers on long cable runs.

Antenna combiner for multi-zone wireless microphone systems – solves distribution challenges by making signal management simple

470 to 960 MHz frequency range, compatible across all brands

Combines up to four separate pairs of diversity antenna connections to one A and B output

Individual-channel, RF signal attenuation control down to -31 dB, in 1 dB steps

Selectable 12 VDC power for active antennas and in-line amplifiers on long cable runs

Selectable On/Off inputs allows for quick control of coverage zones for roaming microphone transmitters

Related Questions and Answers

Q: 1. Can you use one element at a time in non-diversity mode? E.G. I want to use only the LDPA antenna on occassion

A: Yes, you can use one element at a time because there are separate A and B outputs on the RF Venue Diversity Fin Antenna with Stand Mount for Wireless Microphone Systems (Black, 470 to 698 MHz).

Q: 2. Can this item be mounted on a standard C-stand stud?

A: Yes, the RF Venue Diversity Fin Antenna with Stand Mount can be mounted on a standard C-stand stud. You will need a 5/8" receiver adapter with a male thread on the other end. The antenna features a mounting block with 1/4"-20, 3/8"-16, and 5/8"-27 threads to secure it on the stand, so you have plenty of flexibility for the adapter. The Manfrotto 014-38 Rapid Adapter - 5/8" Stud to 3/8" Thread (B&H # MA01438) is one example of an adapter that can be used.

Q: 3. Is this compatible with active antennas or only passive antennas?

A: The PSC RF Multi SMA (470-700 MHz) is compatible with both passive and active antennas.

Q: 4. Is this compatible with sennheiser G4 ?

A: Yes the PSC RF Multi SMA is compatible with diversity receivers in the 470-960 MHz. The Sennheiser G4 receiver is a diversity receiver.

Q: 5. Does the bundle include the 12v power adapter cables?

A: Yes. The 4 power cables are attached to the combiner unit and plug directly to and power up the individual channel units.

Q: 6. what is the filter slope?

A: Here are the specifications provided for the RF Venue BPF470T560 RF Band-Pass Filter (470 to 560 MHz): Insertion Loss Max: 3.5 dB Ripple in-band Max: 1.5 dB Voltage Standing Wave Ratio: 1.5 Rejection: 40dB @ DC-440 MHz 20dB @ 440-449 MHz 20dB @ 582-592 MHz 40dB @ 592-1000 MHz Power: 2W Temperature: -22 to 158° F

Q: 7. how to set up with wisycom mcr42s?

A: thank you for your question. please give us a call at 800.606.6969 so that we can better assist you/

Q: 8. Why does it not have a gain switch to account for the signal loss within the BNC cable?

A: The RF Venue Diversity Fin Antenna with Stand Mount for Wireless Microphone Systems (Black, 470 to 698 MHz) does not include a gain feature as it is a passive antenna. Active antennas can pose risks such as overloading the RF front end of a receiver system, and you can easily overload by using an active antenna’s gain control at a setting that is disproportionally strong for the cable run’s length. A good practice would be to implement passive antennas, and then only add in-line amplifiers to make up for transmission line loss if doing very long cable runs of more than 100 feet.

Q: 9. Are these sold as pairs? 2 antennas per RF kit, so want to be sure before ordering.

A: These are sold as single units.Simply connect the band-pass filter in-line with your wireless microphone remote antenna connections for 40 dB of side rejection. Note: (2) required for diversity wireless microphone systems.

Q: 10. Can I use this with Lectrosonics systems and if so, how do I hook it up to my transmitter/receiver/mixer?

A: Yes, the RF Venue Diversity Fin Antenna with Stand Mount for Wireless Microphone Systems is compatible for use with Lectrosonics wireless receivers operating within the 470-608MHz range. The Diversity Fin has two BNC connections onboard for connecting to corresponding receiver antenna outputs. If you are using multiple receivers, you can connect them all to a single diversity fin using an antenna distribution system. BH #RFDFINDISTRO RF Venue 4-Channel Antenna Distributor with Cloth-Covered Diversity Fin Antenna and Cables Bundle is a good option for this scenario: https://bhpho.to/34K2Fcy