Pair your select Canon camera to the ONsite Relay System with this Relay Camera Coupler from Tether Tools. In this case, it takes the place of the EOS M5 or EOS M6 battery pack and provides a connection to the power source for long-term, continuous operation of your camera. This setup can easily be swapped out with another coupler to provide you with compatibility across camera systems.

Connects Camera to ONsite Relay System    Slides into Camera Battery Slot

EOS M5
EOS M6

Related Questions and Answers

Q: 1. Does anyone have experience using this system with the Nikon D750?

A: The Tether Tools Relay Camera Coupler for Nikon Cameras with EN-EL15C Battery with the Tether Tools Case Relay Camera Power System works great with the Nikon D7500. You could use any battery with a usb port. The Power System has a built-in battery that will allow you to change batteries without losing power to the camera. You could also use this system for AC power by adding a USB to AC adapter.

Q: 2. Does this work with the Panasonic GX85?

A: The Tether Tools Relay Camera Coupler for Panasonic Lumix Cameras with DMW-BLG10 Battery will work with the Panasonic GX85

Q: 3. Does this work with the Lumix G100 camera?

A: Yes, this would work with any camera that takes the DWM-BLG10 like the Lumix G100.

Q: 4. These adapter must to be conected to which power suply? thanks

A: The Relay Camera Coupler for Canon Cameras with LP-E10 battery gets its power from the Tether Tools Case Relay Camera Power System B&H # TECRUPS110 https://www.bhphotovideo.com/c/product/1235872-REG/tether_tools_crups110_case_relay_camera_power.html

Q: 5. Does this work with A7S III and FX3 without the battery warning? The two cameras mentioned would spit "the operation and safety of this battery cannot be guaranteed, continue" warning on most third party batteries and couplers.

A: If you use the Tether Tools Relay Camera Coupler for Sony Cameras with NP-FZ100 Battery with the Tether Tools Case Relay Camera Power System Both cameras are fully compatible and they won't display the warning message.

Q: 6. On a Canon M5, you can't operate the camera without closing the battery door. As far as I can see, there is also no cable outlet of any kind. How is this product physically able to work?

A: You should be able to make it work with the M5 without keeping the battery door open. Canon sells a similar coupler to this for the M5 that plugs into the wall. Ours is meant to plug into a USB battery pack.On the bottom of the inside of the door, do you see a silver piece with a round hole? The version I've found has a number 3 on that rubber piece, but yours may be different. That rubber piece should pop out and you would plug the cable into the coupler through that hole.

Q: 7. Could this also be used to power a monitor?

A: Yes, as long as the monitor uses the NP-F battery, it will work perfect.

Q: 8. What kind of connector is on the end of the cable?

A: It's a proprietary connector that is designed to only connect to the Tether Tools Case Replay Camera Power System. The Coupler is merely the lightweight battery that fits into your camera, with a connector to the external power supply.

Q: 9. Does this work with the Sony a6500?

A: Yes it should. works on the 6300

Q: 10. Does this have a 5.5/2.5 mm size connector?

A: Yes, it has a 5.5 od and a 2.5 id.